Zalman fetishism

dago · **Posted:** Thu May 22, 2003 11:58 am

nothing so much interesting here, just that I found that the zalman heatsinks are just ... well, really nice. Worth having them just for the look

rpc180 · **Posted:** Fri May 23, 2003 9:02 am

Yup! I like the zalman look in my case too. I agree, cept that the flower gets covered by a fan

Asthetically, I would go for the 7000CU just cause it would be neater, but the weight issue has me worried, if they ever make it with bolt through fitting's I'd get one in an instant!

DeadBySundown · **Posted:** Fri May 23, 2003 11:44 am

Do not fear the 7000Cu. Got one in my machine, love it. Probably best not to accelerate the box in excess of 3g with the heatsink in place, but that's good advice for any machine, Zalman-equipped or no.

MGP · **Joined:** Thu Dec 05, 2002 4:32 pm **Posts:** 519

may i ask what type of graphics card is the one pictured with the nb32j heatsink? how does the new combo work?

dago · **Posted:** Sat May 24, 2003 12:50 am

Oh yeah, forgot to put the specs :

- Zalman CNPS6000-Cu on a Athlon 1700XP+ T-BredB / Asus A7V333
- Zalman ZM-NB32J on an Excalibur Radeon 9000Pro in replacement of the screamer on the left (I never tought such a small fan can make that noise)

So, the installation on the graphic card was easy, mainly because the previous HS+F was fixed using the 'standard' chipset holes and a very small amount of thermal grease.

I havent measured any temperatures on the graphic card, but, the heatsink is a little hot to touch after desktop use. Not (re)installed games yet.

Zhentar · **Posted:** Sat May 24, 2003 9:38 am

wow that motherboard has the processor slot rotated 90° from the standard.... wish I had it, would sure help cooling with my fortron PSU.

dago · **Posted:** Sat May 24, 2003 10:12 am

... and I wish that I have it normally so that I can cool it with my 120mm exhaust fan (with a duct 'à la' Rusty) and remove the up fan ...

dago · **Posted:** Sun Jun 22, 2003 4:14 am

I just realised that the memory chips on my radeon were labelled 'Etrontech'. If you decompose, you've got 'Etron' and 'Tech.

I suppose everybody knows what 'Tech' is for (Technologies).

For the non-french speaking persons out there, 'Etron' is means ... 'shit' (in the most primitive form of the term). Wonderful name, in fact.

Gxcad · **Posted:** Mon Oct 13, 2003 11:36 pm

Reminds me of Volkswagon, which in japanese sounds quite terrible, and roughly translates to "brokedown crappy wagon". I wonder how their sales are in Japan (if any?).

-Ken :twisted:

al bundy · **Posted:** Tue Oct 14, 2003 12:10 am

This thread made me laugh hard twice, thanks you guys!
I'd never heard translations before...

Fabool · **Posted:** Tue Oct 14, 2003 1:08 pm

Those are nothing. You don't even need to translate this: http://www.theinquirer.net/?article=11682

WannaOC · **Joined:** Wed Jun 11, 2003 1:59 pm **Posts:** 85

Has anyone tried to use a 120mm fan attached to the side of the case to blow over that CPU sink?

dago · **Posted:** Tue Oct 14, 2003 11:08 pm

Short : Yes.

Long : You may want to have a look at Rusty's in desk PC.

For me, it didn't worked good because the zalman flower is perpendicular to the fan exhaust, so I reached 70-80°C that way on an XP1800+.
Otherwise I could use a 120mm-fan PSU, but I have a normal nexus so it won't work ...

Zalman fetishism

Who is online