What made you exclude the minja out of your plans ?
I have still not made a decision yet, and was interested in someone else's arguments.
Search found 45 matches
- Thu May 15, 2008 7:27 am
- Forum: Cases and Damping
- Topic: Please recommend HTPC/ATX case that fits Scythe Ninja
- Replies: 10
- Views: 4977
- Thu May 15, 2008 6:24 am
- Forum: Cases and Damping
- Topic: Please recommend HTPC/ATX case that fits Scythe Ninja
- Replies: 10
- Views: 4977
- Wed May 14, 2008 7:19 pm
- Forum: Cases and Damping
- Topic: Removing fan grills on Antec 182
- Replies: 15
- Views: 7878
It took me a while, but I finally did it, my fangrillectomy. Tin snips were definitely the way to go, cutting was a <5 minutes job for the top and rear. Blunting the sharp edges was a different thing altogether. I tried a dremel with a bit that appeared to serve this purpose, but besides a lot of sp...
- Wed Mar 19, 2008 11:06 am
- Forum: Cases and Damping
- Topic: Removing fan grills on Antec 182
- Replies: 15
- Views: 7878
Removing fan grills on Antec 182
Maybe a dumb question but I never worked with metal before, what tools would be the best for cutting out the fan grills on an Antec 182? Hack saw ? Other type of metal saw ? Reciprocating ? Then, what did you use for dulling the freshly cut edges ? Metal file ? Any other general thoughts on what sho...
- Wed Mar 19, 2008 7:04 am
- Forum: Power Supplies
- Topic: Which Pico-PSU[?]
- Replies: 4
- Views: 3692
Which Pico-PSU[?]
I am planning on a custom case for my PC, and was wondering if aPico would be able to drive all this: - amd x2 5000 on ninja rev B with yate-loon @ 5v - asus m2n-vm dvi micro atx MB with integrated nvidia 7050 GPU - WDC 1Tb GP 1000EACS - External DVD-RW on USB port with dedicated power supply - wire...
- Wed Mar 12, 2008 1:59 pm
- Forum: Silent Storage
- Topic: Best internal enclosure for "spinning noise" probl
- Replies: 30
- Views: 13420
I installed a Scythe Quiet Drive in my P182 to silence a noisy 320Gb Seagate. The results were more than satisfying, I simply can not hear my drive anymore, all the vibrations are gone, the unnerving humming is history. And, as a bonus gift, the disk is now cooler than before! I can only say that I ...
- Sun Mar 09, 2008 7:16 am
- Forum: Cases and Damping
- Topic: Media PC Case with ATX PSU and Front to Back Airflow
- Replies: 9
- Views: 4559
Coolermaster CM 28x series
http://www.coolermaster.com/products/pr ... eid=000021
http://www.coolermaster.com/products/pr ... eid=000021
- Fri Feb 22, 2008 8:36 pm
- Forum: Cases and Damping
- Topic: Low budget cases?
- Replies: 5
- Views: 3675
- Fri Feb 22, 2008 7:27 pm
- Forum: System Advice / Troubleshooting
- Topic: Advice requested for seriously silencing a P182
- Replies: 6
- Views: 4982
Another thing, I already tried suspending the drives, my lower cage now looks like swiss cheese, thanks to some smart , 3AM, Alexander Keith fueled, multiple rounds of calculations for where to drill the elastic holes. In the end the drives have been suspended, but the noise remained the same. I am ...
- Fri Feb 22, 2008 7:21 pm
- Forum: System Advice / Troubleshooting
- Topic: Advice requested for seriously silencing a P182
- Replies: 6
- Views: 4982
Thanks for all the replies. A few things that I forgot to mention: - PS is a corsair 620W; it might not even have a fan, for what I can tell, I never heard it; no wonder the fan never starts, as my power usage at the wall is 85W idle and 135 watts peak. Why do I need a 620W PS, you tell me. - the Q6...
- Fri Feb 22, 2008 3:50 pm
- Forum: System Advice / Troubleshooting
- Topic: Advice requested for seriously silencing a P182
- Replies: 6
- Views: 4982
Advice requested for seriously silencing a P182
Here is my situation. Patient: Antec 182, Gigabyte P35DS3R, Q6600 with Ninja rev b, Passive 8400GS. HD1: WD250 Gb HD2: Seagate 7200.10 320Gb CPU Fan: Stock Scythe ( I read somewhere that it might be the slip stream , but mine does not look like that; speedfan reports is at 1000RPM ) Case: 1 Tricool ...
- Mon Nov 26, 2007 7:56 pm
- Forum: System Advice / Troubleshooting
- Topic: Quiet Linux-based fileserver (advice needed)
- Replies: 14
- Views: 7095
I, like many other people on these boards, am using a ninja on my q6600 sitting on a P35-DS3R. Pushpins are fine, I really do not understand why people make such a fuss out of it. My CPU idles at 32C and tops at 44C when stressed (prime 95). The whole assembly feels solid, I moved my P182 a couple o...
- Wed Nov 21, 2007 4:58 pm
- Forum: CPUs and Motherboards
- Topic: Core2 quad Q6600 really this hot??
- Replies: 16
- Views: 14103
My temps on a DS3R Q6600 (G0) with pushpin lapped Ninja, P182 with all 3 tri-cools on low: Idle: 32 Most intense real world activity that I do: 38-40 (converting RAW files to JPG and Photoshop batch processing) Prime95: 43-44 There's a passively cooled 8400gs in my case and 3 HDs in the lower chambe...
- Mon Sep 17, 2007 6:41 pm
- Forum: General Gallery
- Topic: My attempt at clean & quiet
- Replies: 5
- Views: 4061
- Mon Sep 17, 2007 5:23 pm
- Forum: General Gallery
- Topic: My attempt at clean & quiet
- Replies: 5
- Views: 4061
My attempt at clean & quiet
Finally everything is put together, up, and running. This is how it looks on the inside, the P182 really does help your cables routing. I kept the tri-cool fans for now, as they are silent enough for my taste. Specs: Antec P182, Corsair HX620, Gigabyte P35DS3R, Intel Q6600, Scythe Ninja, Corsair DDR...
- Mon Sep 10, 2007 12:28 pm
- Forum: CPUs and Motherboards
- Topic: Gigabyte P35 DS3R won't POST
- Replies: 4
- Views: 3935
Good call copyright, with a twist.
Good intuition copyright. I forgot to mention in my initial post that I already tried that yesterday night, and did not fix anything. This afternoon, before unplugging everything (that 8 pin cable underneath the ninja is a real @#$%^), I reset the CMOS again, this time with a proper jumper (yesterda...
- Mon Sep 10, 2007 9:44 am
- Forum: CPUs and Motherboards
- Topic: Gigabyte P35 DS3R won't POST
- Replies: 4
- Views: 3935
Gigabyte P35 DS3R won't POST
Hello everyone, After putting everything together this weekend and turning the power ON, well, nothing. No POST, no beep, nothing at all, monitor stays black, does not even power on (the monitor). I started taking stuff off the MB, disconnected the hd, then the DVD, then took out the video, then the...
- Mon Sep 10, 2007 8:36 am
- Forum: CPUs and Motherboards
- Topic: GA-P35-DS3R BIOS Settings - Need Help
- Replies: 11
- Views: 9400
- Fri Aug 24, 2007 11:49 am
- Forum: System Advice / Troubleshooting
- Topic: Building a NAS
- Replies: 9
- Views: 5569
- Fri Aug 17, 2007 6:29 pm
- Forum: Power Supplies
- Topic: Quiet power supply with more than 4 sata connectors
- Replies: 4
- Views: 2753
- Fri Aug 17, 2007 6:01 pm
- Forum: Power Supplies
- Topic: Quiet power supply with more than 4 sata connectors
- Replies: 4
- Views: 2753
Quiet power supply with more than 4 sata connectors
Can anyone recommend a power supply with more than 4 sata connectors ? I intend to run 3 HDs and 2 DVDs, all sata. The only one I could find was the Corsair HX620, all the others stop at 4 connectors. Budget is an issue, the lower the price, the better. Watts wise, 500 or 600w should be Ok, I calcul...
- Fri Aug 17, 2007 2:24 pm
- Forum: System Advice / Troubleshooting
- Topic: Photoshop / Image processing system for CAD 1000
- Replies: 4
- Views: 2662
- Mon Aug 13, 2007 12:57 pm
- Forum: System Advice / Troubleshooting
- Topic: Photoshop / Image processing system for CAD 1000
- Replies: 4
- Views: 2662
Bonestonne: Thanks for the comments. I do not intend to do any CAD an this box, just Photoshop and RAW to JPG conversions in Nikon Capture. Whenever I boot in Linux, everything I'll do will be so overkill that its not even worth talking about. Coming back to my RAW pictures, I tried various setups o...
- Mon Aug 13, 2007 10:00 am
- Forum: System Advice / Troubleshooting
- Topic: Photoshop / Image processing system for CAD 1000
- Replies: 4
- Views: 2662
Photoshop / Image processing system for CAD 1000
Component list: Case - Antec P182 - 147.85 PS - Corsair HX 520 - 109.18 (-10 MIR) MB - Gigabyte P35 DS3R - 141.35 CPU - Q6600 - 288.88 Heat Sink - Scythe ninja - 35.72 RAM - Corsair DDR2-800 2Gb - 124.99 (-30 MIR) DVD - Pioneer Sata - 33.38 GPU - Asus 6200LE - 32.67 Total - 914.02 GST - 54.84 MIR -...
- Fri Aug 10, 2007 11:10 pm
- Forum: Video Cards & Monitors
- Topic: Video card advice request
- Replies: 25
- Views: 13317
Re: Video card advice request
Thats bollocks, just quietly. A 24 inch model will happily run off VGA in native res. Intriguing statement Mikey, I can't seem to remember where this idea of "1920x1200==dvi cable" came from, but if what you say is true, that means I could run my two displays of a 6200 and I do not need dual DVI. C...
- Thu Aug 09, 2007 7:58 am
- Forum: Video Cards & Monitors
- Topic: Video card advice request
- Replies: 25
- Views: 13317
Gigabyte GA-P35-DS3Ljojo4u wrote: EDIT: btw, what's your motherboard?
http://www.gigabyte.us/Products/Motherb ... A-P35-DS3L
- Wed Aug 08, 2007 4:23 pm
- Forum: System Advice / Troubleshooting
- Topic: Advice on new P182 build: ALMOST DONE! (Kind of.)
- Replies: 24
- Views: 10343
- Mon Aug 06, 2007 4:37 pm
- Forum: System Advice / Troubleshooting
- Topic: mATX G33/P35 with onboard DVI?
- Replies: 8
- Views: 4236
Asrock 4Core1333-FullHD
http://www.asrock.com/mb/overview.asp?M ... 333-FullHD
Yet, I was not able to find it on sale anywhere.
Maybe on it's way ?
http://www.asrock.com/mb/overview.asp?M ... 333-FullHD
Yet, I was not able to find it on sale anywhere.
Maybe on it's way ?
- Mon Aug 06, 2007 9:15 am
- Forum: System Advice / Troubleshooting
- Topic: Chipset advice for Q6600: 965 or P35 ?
- Replies: 1
- Views: 1622
Chipset advice for Q6600: 965 or P35 ?
I am building a photoshop machine. No gaming, no sli, crossfire or anything similar.
It will sit in a P182 and a Q6600 will do the crunching.
Some slight overclocking is possible, again, nothing extreme.
Is the P35 better than the 965 ?
Thanks in advance,
BN
It will sit in a P182 and a Q6600 will do the crunching.
Some slight overclocking is possible, again, nothing extreme.
Is the P35 better than the 965 ?
Thanks in advance,
BN
- Fri Aug 03, 2007 4:46 pm
- Forum: Video Cards & Monitors
- Topic: Video card advice request
- Replies: 25
- Views: 13317
Video card advice request
I am absolutely not into gaming, but I am looking to display on two 24'' monitors, each in 1920x1200. AFAIK, I need two DVI outputs for this, the VGA only goes to 1600x1200. The machine I'm building will never run vista, only XP (photoshop) and Linux. Which would be the best card around for my needs...