sorry to say, but 2.5 cfm is utterly useless =\

huh? a low cfm fan blowing in vs an ultra high cfm fan sucking out will obviously not be correct. cfm for cfm blowing is better than sucking.

Psyco, from what ive researched, the fortron is the same, if not better than the antec.

i suggest getting a nexus or fortron (sparkle) 350 watt psu. thats what i have(sparkle), modded, and i can ru nit a about 7 v. works gret, the air mcoming out isnt even that hot. i opresume i can go lower but theres no need, i can hear it anyways.

psyco, check out my rig (in the case gallery). i just cut away a bit of the front of the drive cage and the panaflo fits in front perferctly, with grommets

yep, completely.

rusty, yep. oc'd and quiet.
ralf, they are mounter with screws i found in my basement, and rubber grommets i got from www.frozencpu.com (rubbber grommets mk2 i believe). and yes, i kow the cutting aint too beautiful. first time with a dremel

jojo, why is the 92mm fan not a good idea? i have a 92mm l1a undervolted to 6 - 7 v on my 2100+ (oc'd to 2366 mhz with 1.7 vcore). it runs at 40c idle. i would say thats prety damn good. and silent too.

lol yeah, thank god i have a cover on the case. theywere starting to give me a headache even under my desk

its great, no wierd buzzes, pretty cheap, and ultra bright leds

well. after all this reserach (im sure you have seen me asking questions for a while now) im finally done! my specs: AthlonXP 2100+ Tbred B OC'd to 2366 mhz (1.7 vcore) radeon 9700 PRO @ 360/360 with zamlan heatpipe cooler. 4 panaflo's, 2*120mm case fans, 1*92mm on hs, 1*80mm in psu (all at 7v or lo...

the D8000

well, 1 differance i think there is (think) is that there is more space between the hd cage of the 3700 than the d800. since me and ralf can fit the 38mm wide panaflo in there (us having 3700's), but katana man cant(D8000). of course, if u still wanted the D8000 with a 38mm think panaflo, u could cu...

If it's a model FSP350-60BT (or even an FSP300-60BT), maybe the temperature sensor was merely left out because the circuit board, next to the heatsink for the low voltage side (close to all the wires coming out of the PSU), has room for two missing components, resistor R15 and thermistor TH1. I hav...

no it doesnt have a control circuit. (itll stay at the same speed all the time). second, i have a panaflo l1a 80mm hooked up to my rheobus in it.

well i installed the 12 v in my psu. and its kinda lous since its shooting straight outta the back (im assuming the 120 is gona be kinda noisy too, so i think ill build something like this http://www.pcmuet.net/product_info.asp?iPID=228 . except instad of just covering the psu fan, making it bigger ...

u mean the 92mm psu fan not 120 hehe

well, itll be OK, but the 6000 is slot smaller than the 6500. so i would not suggest running it without any fans even if u have a fairly strong front case fan. its just not that big, and these new xp's just produce too much heat.

wel, u shouldnt plan on using it, since it wnt fit on your 2200+......

bad news, the 6500 is only for the p4. check everything out here http://www.zalmanusa.com/

if u have more than 4 fans, this zalman rheobus can control 6http://www.zalman.co.kr/usa/product/zm-mfc1.htm

if ur buying fan mates for the fans, then get the 3 pin

http://www.geocities.com/rpc180/caseint1.jpg
http://www.geocities.com/rpc180/caseint2.jpg
http://www.geocities.com/rpc180/caseext.jpg

copy/paste em

so, what frequency and type of interference are we trying to stop?

havent ordered the fans yet, so ill get em with 3 pin connectors hehe. then i guess just cut the connectors off, add some wire, then re attach them

quietmind, isnt the zalman quieter than the nexus?

looks cool, that would be good for me when i get my 9700 with zm80A-hp.
btw, hows that acoustic foam from compusa? and did u get teh slot cooler from compusa also?

..

naw, didnt order it. ill get the 3 pin version, with the color changing leds, from svc for 20 bucks. even though the shippings like 10 bucks, its still cheaper than the 35 + shipping from newegg.

hmm, actually i think i might go for the front fan. seeing as u only have a 1 ghz in there, (which i have in my comp w/o any fans whatsoever) i guess the ammount of heat would be diff. ill just test out diff configurations with a friends L1A's (hopefully )