Search found 7 matches

by loefet
Sun Mar 28, 2010 3:30 pm
Forum: SPCR Article Discussion
Topic: Silverstone Grandia GD05: A Versatile HTPC Case
Replies: 69
Views: 70017

Couldn't the optical drive be on the left side, above the PSU? Too wide? HDD bay on the front right and lots of room around the CPU. I agree with you, this would be the best solution to make the best of the case. The width isn't an issue since both the PSU and the optical drive have the same width,...
by loefet
Fri Mar 05, 2010 9:36 am
Forum: CPU Cooling
Topic: Scythe Ninja 3
Replies: 21
Views: 10561

Scythe Ninja 3

Scythe have on Cebit presented a new update on their Ninja cpu cooler line. The Ninja 3 have more heat-pipes and they have reverted to a fin shape that is much more like the one featured on the first Ninja. Which means that you have access to the mounting brackets again. http://www.computerbase.de/n...
by loefet
Fri Feb 19, 2010 2:21 pm
Forum: SPCR Article Discussion
Topic: Antec ISK-300 Mini-ITX Case
Replies: 86
Views: 84691

I wonder if it's possible to fit a Scythe Samurai ZZ inside that case (when using a non atom board) looks like it would be the ideal CPU cooler for that case. Since most of it can be fitted to the rear and all the fins line up perfectly with the fans. http://www.scythe-eu.com/produkte/cpu-kuehler/sa...
by loefet
Sat Feb 06, 2010 8:19 am
Forum: System Advice / Troubleshooting
Topic: My dell 30"Monitor emits noise! wich 30" mon. is b
Replies: 11
Views: 5800

Have you tried to increase the brightness to maximum?

That at least removed the "coil whine" on my Benq FP241W.
The lower the Brightness is set the higher the whine will be, it's a pretty normal problem with high voltage power supplies...
by loefet
Wed Sep 06, 2006 10:56 am
Forum: Cases and Damping
Topic: Ninja in an NSK3300?
Replies: 4
Views: 3718

I have about an inch between the Ninja and the top wall, but then all the cables must also fit between.

I havn't used the fan mounts that were with the Ninja, but instead modded 2 120mm fans into a fanduct to the rear fan mount on the case.
by loefet
Wed Sep 06, 2006 9:07 am
Forum: SPCR Article Discussion
Topic: Antec NSK3300: A Mini-P180?
Replies: 82
Views: 71374

Just built together my NSK3300, it worked out pretty nice. I run a: AMD64 3200+ with Q&C on, cooled by a Ninja. A nvidia 7600GT with a VF900. And a Hitachi HDD on the floor of the case. DVDRW, 1GB ram, stock PSU. I did some modifications to the case. *Reversed the cover between the chambers to get "...
by loefet
Wed Sep 06, 2006 8:51 am
Forum: Cases and Damping
Topic: Ninja in an NSK3300?
Replies: 4
Views: 3718

I just fitted a Ninja in my NSK3300. It worked out quite nice, did some modding to the case so it would fit my needs. I had a Zalman 7700AlCu before, and if you can fit that to the mainboard without having it sticking out over the edge then it will work. I have a MSI K8NGM2-IL mainboard. Link > http...