Brand New Factory Sealed Retail Package Includes Heatsink and 3 Year Warranty. Just got it from Newegg at $58...Customer backed out, deciding not to upgrade the PC. My loss... $29.99

$180 shipped FedEx in Continental USA. CPU is Used. Pulled from working machine. Switched to Hexacore processor. Includes brand new Intel Cooling Fan in the Original Box. Still under Intel 3 Year Warranty. GUARANTEED WORKING. 3 Day Money Back Guarantee. I stand by my Ebay and Craigslist sales. Over ...

Studio Hybrid would be an excellent choice. It is a little more expensive than the Asus EEE Box I first recommended. But the Studio has faster components and a built in DVD. I have always liked Dell products for their value. And the Studio has good looks, too! They are also available for a couple hu...

For a very compact and QUIET PC, you can hardly beat the Asus EEE Box 202: http://www.newegg.com/Product/Product.a ... 6883220006

Mount it to the rear of a 19in LCD and you have a total system for about $400.

Thanks Jaime. I like Scythe fans. 100x12mm will be a tight fit. The 60mm fits in the heatsink borders. 100 would certainly extend about 1.5in. And the extra 2mm in depth should still clear the case top and heatsink. I used a Fanmate on the stock Zotac fan but needed to run it full speed to keep the ...

I tried a Zotac 9300 mini-ITX board in a much larger case Apex M100 case with Q6600 95w quad processor and the stock Intel cooler. I could not keep it cool AND quiet. Ran around 40C with a fair amount of noise. Not objectionable but not good for a quiet htpc. I doubt if you could ever get even a 65w...

Got my Zotac Ion DualCore Atom on Mon Jun 1 from the egg. The board is beautiful. Love the integrated power. WiFi. Popped into a Morex 350 case from mitxpc and was running some HD video in no time. However, I had to install the included Zotac 60mm fan on the NB/CPU heatsink. That brought temps down ...

Cov,
That is a small computer. What is it? More details, please.

Why not just silence the fan completely and FREE with the AA1 Fan Control program. It allowed me to shut the fan off completely. The temp runs about 50-60C without the fan. With the fan running at its normal slow speed, temps were in the 45C range. Doing alot of processing, I notice at 60C the fan s...

I switched to XP. Linpus required too much reading and learning new OS to get it to do the things I needed. Just not worth it right now. Slapped an nLited XP on, did a few disk caching tweaks and never looked back. So, for fan control I use AA1 Fan Control. Very simple and works very well...you just...

I bought an Asus EEE 4G 7inch model in Jan 08 for $400. I liked it...it was my first netbook experience. I loaded Windows and played with it. But the quickness of the factory Linux convinced me to revert. Build quality was okay. But I could not get used to the small keyboard and screen. And I sold i...

I just got my blue AA1. It was the 8gb SSD 512mb RAM Linpus model fro $250 from the Egg. The fan noise was a slightly noticeable in a very quiet room. Not overly objectionable. I didn't care for the Linpus and installed XP Home shortly after bricking the original Linpus load (easily bricked and was ...

I have purchased 3 Solo from Frys and Newegg in the past year for considerably less...however, they all involved rebates. Antec is very good...I received all three fairly promptly. Oct 07 Frys $59.99 with free shipping and $40 Rebate Final Cost $20 Jan 08 Frys $69.99 with free shipping and $40 Rebat...

I have had several high performance mobo that undervolt. It is the manufacturer that decides to allow undervolting in BIOS. ABIT has chosen NOT to allow undervolting. I used to be an Abit fan and built several systems with their mobo. UNTIL they decided NOT to allow Undervolting. Instead, they selec...

I have been a Ninja fan ever since I got my first Version A three or four years ago. After reading here about the XigmaTek 2183, I ordered one with the $10 rebate and the optional bolthru kit for 775 socket. I was hesitant to disassemble my perfectly working Q6600 on Gigabyte P35-DS4 in Solo case. I...

Get your wife's hair dryer out (I use medium settings) and use it on the backside of the motherboard, applying slight pressure to the backplate while removing it. Usually works okay with no damage to motherboard. Then use rubbing alcohol to remove the sticky residue on motherboard. Then cover the st...

I tried this same board last summer for my HTPC. Worked fine with E4300. HOWEVER, it does NOT undervolt!! I wish Abit bios writers would get with the new wave intel cpu's that thrive with undervolting for cool and quiet operation so necessary in HTPC. I sent it back for the undervolt issue. Went wit...

I installed a Zalman cooler on my D201GLY2 NB. Fits on the mobo tight with Intels spring clip. It is only a mm or two taller than stock CPU cooler, so should fit most cases. Very reasonable priced at only four bucks: http://www.svc.com/zanoco.html Provides very good cooling. Even video processing an...

I have the Apex MI-100 with D201GLY2. I like the ability to use full size optical. However, my 3.5HD did not fit comfortably in the side slot with SATA cabling, so I mounted it with velcro to the bottom front of the case under the optical drive. I mounted a Nexus 80 fan in the side slot next to stoc...

$199 Everex from WalMart
http://www.walmart.com/catalog/product. ... id=7754614

The Full Size Ninja B is only $10 more and about 1.5inch taller but with more cooling power. Use it with Thermalright Bolt Thru kit for rock solid mounting on Intel775 mobo. I have one and I like it!

Why not just use a replacement screw...it's nothing special.

My Ninja 'A' works very well, being moved to at least six different mobos over the three years I have owned it. Of course, I never removed the paper covering the adhesive on the bottom plate.

I own two Antec Solo cases. I love their features. But the Power/Reset switches are poorly designed for long term reliability. My Power button snapped off where it is attached to the case. Antec just melts the plastic standoff stud to hold the button in place. I used some plastic glue to re-attach t...

Orthos stable at stock 2.13ghz at 1.01V. Doesn't appear to have any Vdroop on this Gigabyte DS3. Everest shows 1.01V at idle and 100% workloaded. Bios setting is 1.05.

I usually run 25% overclock at 1.15V. VID is 1.325V

I've had my Tagan for over 3 years of super quiet reliable operation. I like it as well as my new Corsair HX520W. In fact, in my Antec Solo case the Tagan with its front/rear fan arrangement makes it easy for ducting using some stiff cardboard, making a separation chamber for psu. The Corsair with i...

I would love to buy this mobo? But how do you get REV 2.0?

buy.com has this highly recommended Corsair 520 watt Modular Power Supply for $79.99 AR. Using googlecheckout knocks another $10 off. Free shipping. Other places sell this for about $120 AR. Here's the link: http://www.buy.com/prod/corsair-520w-sli-certified-modular-atx-power-supply/q/loc/101/203270...

Antec shipped me two replacement feet for my Solo with just an email to their customer service department. Very quick service. The new ones have been working perfectly, even though I regularly slide the case in and out of my desk enclosure, putting a little strain on the feet. Antec is great. Best c...

Thank you for prompt shipping. Item was exactly as described and well packed. I appreciate the great service.

SPCR's are the greatest!

For those interested in the Silverstone LC13 case... The Egg delivered fast, as usual. PRO: Very heavy steel with aluminum front panel. High quality was evident through out. Nice rounded edges. Long cables with ferrite core for interference dampening. Front drop down panel uses cam gearing. Fast cus...