Thinking of a similar build but with the Asus P8H67-M PRO/CSM because of the ATA port so I can keep using my CF card for the OS

Currently have a P3 1Ghz with 4x WD Green 1TB with Linux mdadm RAID10 with ext4, used to have RAID5 with xfs but migrated because of RAID5 problems.

Please add the 945GSE at 6 watts (+3.3 for the ICH7M)

http://ark.intel.com/chipset.aspx?familyID=35553

Total of 11.8W for the Intel Atom N270 + 945GSE and ICH7M (Acer Aspire One, EEEPC901+/Box, Wind, Wind PC)

cloneman wrote:Also, a friend's Acer (Pentium M) also appeared to suffer from this problem.

That would be me, but to a lesser extend, my headphone jack is fine

For Canadians, you can get them for CAD$2.99 at DirectCanada.com
$10 shipping for order under 5lbs ("1lbs" ea)

http://www.directcanada.com/products/?sku=23420AC2458

I have a Seagate 7200.9 here and bough one for my buddy and I can assure you I won't buy another one again Excessive vibrations, loud seeks and had to RMA them both due to motor noise?! Anyhow, I will most likely order from NCIX.com or DirectCanada.com (Canada's newegg's?) Edit: As for the SATA issu...

I know the Samsung P80 is the recommended reference and even though it's somehow discontinued, I think I managed to locate down one store who still have these left, priced at 65 for the SP0842N (newer?) and 75 for the SP0802N (older?) I'm not in the mood to do ebay hunting, buy a second hand drive w...

I think you're better off with EFW, remember that solid state media have a limited write cycles before it fails, so you don't want XP to continiously write to it For NTFS, you can disable the NTFS last access time update through the registry I've used XPe with remote boot via PXE/tftp :lol: and my i...

Thanks Oleg, I didn't know a reviewer of xbitlabs would reply to my post :D Btw, wonderful website, the articles are so techy and in-dept I've read the FSP round up one but didn't notice the explanations for the other round up with the Epsilon Explained everything I need to know, now to decide betwe...

P3-1GHz? It's a processor that runs off the +5v line, right? That means the FSPxxx-60THN is out since it's made for +12v systems and the rails will go out of spec. I need the PSU for my A64, not my P3 But good thinking, not sure about this one, maybe I should find a older ATX 1.x PSU for my P3 and ...

I'm just being safe, IBM (or some other compagnie) had disk high failure rate on one of thier line where they used plastic tray, apparently caused by static build up

Ok, the Antec SP-350 that came with my SLK1650 started whining ahile ago and now that I have time, I swapped it with a SP-450 from my older system It's a little better but I think this SmartPower is also going downhill I had to put the ATX-400PN in my P3 as I needed the airflow of the 120mm to help ...