ya, i think im going to go with the scythe

http://a-power.com/product-4719-564-2
the place i order from has a lot so yay

thx

I know there is a whole article on the 120mm fans but im still debating 3 of them and wanted other opinions.

1. Yate Loon D12SL-12 120MM
2. Scythe S-FLEX SFF21F
3. Noctua NF-S12-1200

thanks for the help

lol...oops

i have the Intel Core 2 Duo 6400 @ stock speed
my idle according to speedfan is 47
load: roughly 60

room temp around 26

antec p180: 1 rear exhaust, top exhaust blocked off, fan in upper hard drive rack, and fan on the actual heatsink

i have the seasonic s12.
no complaints

So I just bought a 120 Extreme, and my temps are
CPU: 45
Sys: 41
Core0: 27
Core1: 28

does the CPU temp look high? any suggestions?

I currently have a Core2 E4400 at stock, with a Zalman CNPS 9500 (non led) EVGA 7900 GT w/ HR-03 w/ fan at low speed (this temp rougly at 42) P5B Asus mb (roughly 40) 2gb ram corsair 520x antec p180 w/ all but top case fan which has been moved to hard drive encloser right now im idling temps range f...

I was stupid enough to purchase a Zalman CNPS 9500 (non-led) cpu heat sink and i really want to get a Thermalright 120. But i dont want my zalman to collect dust, so i was going to stick it in my old computer (P4, but its socket 478). I know the Zalman 9500 LED comes with an adapter to fit socket 47...

Okay, here is my situation. When i bought my most recent computer i never came to spcr (big mistake) I ended up buying the Zalman 9500 (non led) which only fits 775 socket cpu's. I really want to switch it with the Thermalright 120, but i don't want to leave this cooler to collect dust. I have an ol...

lol...i guess i should have read it.. mybad

does anyone know where i can find a Mac OS icon pack that includes the Microsoft Office 2004 icons along with the system icons?

I have an Antec p180 and I've been debating on what material to best use to dampen the noise.

I'm leaning towards acoustic foam, but i cant seem to find any in vancouver. I'm open to any other suggestions.

also, how do u attach it to the case without using tape n stuff....

thx!

i too found that by removing and covering up the top, my temperatures were lower. All i did was take a clear plastic CD case, drilled 2 holes in it and surrounded the perimeter with electrical tape (then screwing it in, in place of the fan). Its now quieter and cooler

I have a zalman Cu 9500 set on silent in the bios, but the fan still spins at roughly 1360RPM. The fan connector is 4 pin, so is there a way of lowering the speed to 1000RPM without using a program like speedfan?

the JERKER is a good computer table, however i have the MIKAEL from IKEA. Its my favorite desk so far as it has a large surface area and its tall enough to fit a self made computer stand / my antec p180. http://www.ikea.com/webapp/wcs/stores/servlet/ProductDisplay?topcategoryId=15600&catalogId=10103...

I am wanting to remove the top case fan from my Antec 180. What should I cover the gaping hole with?

I just bought a Thermalright HR-03 for my eVGA 7900GSKO and was wondering should: 1. a fan be mounted to my Antec p180 to blow air across the sink and out through the back 2. a fan be mounted onto the heatsink 3. passive cooling also, what fan should i get for this baby? :D p.s. i am not over clocki...

kk thx!
which way should I mount the hr-03 then
with the grills above the video card or below?

I have the eVGA 7900GSKO and the heatsink fan is annoying the hell out of me. What should I replace it with? Thermalright HR-03 or the Zalman VF900 My computer is not ultra quiet, but it hardly audible My System: Intel E6400 | Zalman CU9500 | EVGA 7900GSKO | Antec P180B | Kingston 2GB 800mhz | Asus ...