Search found 14 matches
- Sun Feb 22, 2009 5:35 am
- Forum: System Advice / Troubleshooting
- Topic: PSU fan swap and too many fans?
- Replies: 10
- Views: 4733
Now this might be my lack of understanding of the options for controlling case fan speed via software (I do my speed controlling via a hardware fan controller) but I thought you needed the yellow RPM wire going to the motherboard to be able to do software fan speed control via Speedfan or something...
- Fri Feb 20, 2009 11:42 pm
- Forum: System Advice / Troubleshooting
- Topic: PSU fan swap and too many fans?
- Replies: 10
- Views: 4733
The TriCools that come with the P182 are run off a 4-pin molex connector (red and black wires leading to the molex only to the 12v positions) with no 3-pin connector. The yellow rpm fan wire goes to the 3 position switch, along with additional power connectors. [snip] I don't think this would be wo...
- Fri Feb 20, 2009 3:08 am
- Forum: System Advice / Troubleshooting
- Topic: PSU fan swap and too many fans?
- Replies: 10
- Views: 4733
Hello nrlightfoot :) The fans supplied with the P182 aren't the best but may be quiet enough if you control them with software according to temperature rather than the P182's simple 3 position switches -- and it would be cheaper than changing the fans, maybe faster and easier too. Maybe easier for t...
- Fri Feb 20, 2009 2:50 am
- Forum: Fans and Control
- Topic: Front, back, top fans...
- Replies: 26
- Views: 16764
Re: Front, back, top fans...
I have the following "set" of fans: - 2x Nexus D12SL-12 Black and White; - 2x Noctua NF-S12 1200 What combination / placement of fans would give a better AIRFLOW in a p182 chassis? Should I use the highest CFM fans for intake fan? or blowing the hot air out? Anyone have studied this?? The way I thi...
- Fri Feb 20, 2009 2:08 am
- Forum: Power Supplies
- Topic: Cooling EA380 with P182 fan (Mike C's radical suggestion)
- Replies: 21
- Views: 13038
A disadvantage
One disadvantage of this modification is that the PSU is not cooled unless the case sides are fitted -- or it may be a useful discipline!
- Fri Feb 20, 2009 2:01 am
- Forum: Power Supplies
- Topic: Cooling EA380 with P182 fan (Mike C's radical suggestion)
- Replies: 21
- Views: 13038
Hello :) The modification is completed and the system is quieter. Sorry - no camera so no pics. The EA380 PSU's fan controller is good at starting the SFF21E fan in the standard position in the P182's bottom chamber -- starting nicely and running at low speed, better than the motherboard (Gigabyte G...
- Wed Feb 18, 2009 10:20 am
- Forum: Power Supplies
- Topic: Cooling EA380 with P182 fan (Mike C's radical suggestion)
- Replies: 21
- Views: 13038
Wow, samuelmorris, you were quick! :) Can't you just plug the connector on anyway and leave the rpm pin exposed, since its on the outside? Thanks for the suggestion. It's not possible without modifying something; the shape of both connectors prevents it but I'll investigate the possibility of removi...
- Wed Feb 18, 2009 10:04 am
- Forum: Power Supplies
- Topic: Cooling EA380 with P182 fan (Mike C's radical suggestion)
- Replies: 21
- Views: 13038
Hello :) OK, I've opened the PSU and learned four things: The PSU fan is a two wire model so a two pin plug is required to connect the three wire SFF21E fan. The exhaust grille is retained by screws tapped into the fan casing so equivalent nuts are required. The P182's PSU clamp (with anti-vibration...
- Mon Feb 16, 2009 8:47 am
- Forum: Power Supplies
- Topic: Cooling EA380 with P182 fan (Mike C's radical suggestion)
- Replies: 21
- Views: 13038
Thanks all for your input :) Using a PSU with a 120mm fan isn't necessarily bad in a P182. A lot of people use them and swear by them. In the P182 I generally prefer a PSU with an inline 80mm fan just because the air doesn't have to change direction as much. For what you are talking about doing it w...
- Thu Feb 12, 2009 6:50 am
- Forum: Fans and Control
- Topic: Linux,lmsensors,fancontrol: script mod 2 get temp by command
- Replies: 0
- Views: 4947
Linux,lmsensors,fancontrol: script mod 2 get temp by command
Hello :) In case it helps anyone, here is a modification to lm-sensors' fancontrol script to allow it to run a simple command to get the temperature for controlling fan speed. I used it to get a temperature from hddtemp. A fancontrol startup script is also shown below. To integrate with the modified...
- Thu Feb 12, 2009 6:17 am
- Forum: Power Supplies
- Topic: Cooling EA380 with P182 fan (Mike C's radical suggestion)
- Replies: 21
- Views: 13038
Cooling EA380 with P182 fan (Mike C's radical suggestion)
Hello :) Once upon a long time ago in the Seasonic S12 Fan Upgrade thread Mike Chin made a radical suggestion: I know that this topic is about modding an S12 with a quieter fan for use in a P180. I have a radical suggestion. 1. Remove the cover off any (halfway decent?) PSU. 2. Remove the fan. 3. Mo...
- Fri Dec 19, 2008 9:34 pm
- Forum: Silent Storage
- Topic: WD 320GB or 640GB SE16 Drive
- Replies: 24
- Views: 15430
Because all the heads move in concert with each other, so only one head is in the correct location at any given moment in time. In other words, a 4 platter drive may have 8 read/write heads, but only 1 of them is in the right place at the right time. You'd need 4 separate servos in order to do 4 op...
- Thu Dec 18, 2008 10:17 pm
- Forum: Silent Storage
- Topic: WD 320GB or 640GB SE16 Drive
- Replies: 24
- Views: 15430
That extra platter = more noise, more power usage, more heat, slower drive ready time, more susceptible to shock damage, and more vibration. Makes sense. What I'm struggling to understand is why more platters (= more heads) doesn't translate into faster sustained read and write times. Don't know ab...
- Wed Jun 04, 2008 11:05 pm
- Forum: Silent Storage
- Topic: WD Caviar SE16 single-platter 320GB hard drive poll
- Replies: 54
- Views: 85371
Hello :) I just bought one in India. It has both the 5 rib casting and wider ridged cover of version 1, although the cover has an extra ridge. The extra ridge should stiffen the cover and perhaps quieten the drive. The PCB is by DYnamic and its part number is 2060-701537-003 REV A, changed from the ...