how much do they cost and can you specify the model you got?

great review... thanks!

perhaps you can review Pivos Aios Media Player if possible ...

Fellows i need your help yet again,

I am trying to silence my 9800 GTX+

how quiet the "Arctic Cooling Twin Turbo Pro" is?

anyone with first hand experience?


ref link: http://www.arctic-cooling.com/catalog/p ... 2_&mID=379

http://www.scythe-eu.com/en/products/vga-cooler/musashi-high-end-vga-cooler.html not good: http://www.cowcotland.com/images/test/scythe/musashi/Bruit_1.jpg more info: http://www.scythe-eu.com/forum/musashi-vga-cooler/ http://www.scythe-eu.com/forum/musashi-vga-cooler/688-exact-dimensions.html http:/...

I agree to test ICD7

neumein wrote:I run a Gigabyte 1gb 9800gtx+ with a Thermalright T-Rad2 + Slipstream 500 inside an Antec Mini P180. Bulky (three slot total), but inaudible at anything other than head right next to the fan. Haven't seen load temps go above 80C.

what is your idle temp?

frenchie wrote:Hi,
I used the normal Accelero on my 9800GTX+, with a noctua P12 fan on it.
Temps top at 65°C at most (usually around 60°C).

how many slots your setup takes?

also was that rev2?

what do you recommend me in terms of VGA coolers for this card? 1 -> Arctic Cooling Accelero S1 Rev 2 Passive VGA Cooler 2 -> Arctic Cooling Accelero Xtreme 9800 VGA Cooler 3 -> Thermalright T-RAD2 2X92MM Heatpipe VGA Cooler for ATI/NVIDIA Cards 4 -> other/s ??? i really need to quiet down this beas...

what do you recommend me in terms of VGA coolers for this card? 1 -> Arctic Cooling Accelero S1 Rev 2 Passive VGA Cooler 2 -> Arctic Cooling Accelero Xtreme 9800 VGA Cooler 3 -> Thermalright T-RAD2 2X92MM Heatpipe VGA Cooler for ATI/NVIDIA Cards 4 -> other/s ??? i really need to quiet down this beas...

i dont know much of hard drives....

do the photos included above are characteristic of a normal hard drive?

>> SATA configuration: "Enhanced"
>> Configure SATA as: "IDE"
(options are: IDE, RAID, AHCI)I have one HDD so far
>> Hard Disk Write Protect: "Disabled"
>> IDE detect time out:"35"




system summary:
e8400
P5Q pro
4 GB gskill 8500
520 w corsair
xp pro x64
9800 gtx+ 512
p182

I have recently bought HD103UJ Spinpoint F1. http://www.samsung.com/global/business/hdd/productmodel.do?type=61&subtype=63&model_cd=249 This HDD is giving me me a lot of problems. When i initially installed XP Pro x64 it was flying. However after installing all of the drivers that came with my mobo ...

i have some margin between the caps and the ontop mobo brackets when aligned with the rear of the case (parallel to the memory slots)

the gray looking cubes are not the caps right, they seem more like transistors of some sort?

i am trying to install my heatsink HR-01 plus on top of e8400 which is placed on P5Q pro mobo. The problem are the capacitors or whatever they are called around the cpu: http://i423.photobucket.com/albums/pp315/redsun11/1.jpg they are so close that im scared to install the HR01 Plus heatsink; and if...

i believe if i am not wrong: SLIP STREAM is good for non restrictive airflow spots (thus, is made for exhaust/rear), also its not a good idea to place SLIP STREAM fan horizontaly S-FLEX is good for restrictive areas such as the intake spot behind the dust grill of the P182 case and in mid of the psu...

Why not just fan #2 and block the top vent, and a good quiet PSU below to cool the HDD. I would think the video card would be the noise maker. so running a 1200 sythe shouldn't be louder than that card. Thank you! Corsair HX520 i believe is very silent (http://www.silentpcreview.com/article699-page...

http://img185.imageshack.us/img185/9706/p182mk2.jpg *** POLL is ONLY a Presentation of what i think is a silent option - no need to vote *** I need help and final decision on what fans to order to get this case going. I`ll present couple of options than you can decide or suggest your own. Configura...

This is 55nm with non-reference cooler, shorter as well does anyone have this card? Can you please share your opinion how silent and how warm this beast gets? I heard is quite cool and quiet (20-25 dba @ idle)??? Thanks, Link: http://www.evga.com/products/moreInfo.asp?pn=512-P3-N879-AR&family=GeForc...

Thank you gentlemen.

Compddd wrote:Gentle Typhoons!

are there any reviews on these bad boyz?

so what would you use in my case: p5q pro mobo e8400 cpu hr 01 plus heatsink 520 psu p182 case 9800 gtx+ (smaller and less power) -------- i am thinking: top: sflex 800 rear/exhaust: slipstream 800 or 1200 not sure here heatsink: s-flex or slipstream 800 (maybe because of the fins are more spaced i`...

also one last question i hope

how do you control all these fans (thru mobo)??

I did a similar replacement when I got my P182. My replacements were all 120mm Scythe Slipstreams rear: 800rpm top: 800rpm front: 1200rpm bottom: 1200rpm HR01: 800rpm (only running if I overclock more than 20% - QX9650) Noctua's should work equally well. You mention 2 front intakes - are you planni...

you guys rock - thank you for the constructive comments
i`ll go with Scythe as well

I went with Noctua because in the review fan article it said they were the most silent fans




cheers fellows and happy holidays!!!

======
yes - i`ll mod the lower chamber to include another fan

Hi everyone, There are the items i have ordered today: EVGA E-GEFORCE 9800GTX+ 740MHZ 512MB 2.2GHZ 256BIT DDR3 Dual DVI-I HDCP HDTV Out Video Card Thermalright HR-01 Plus 6 Heatpipe Cooler LGA775 AM2 CPU Heatsink *Fan Not Included* Corsair HX520W CMPSU-520HX ATX Triple 12V 40A 24PIN ATX Modular Powe...

Thank you gentlemen

Hi everyone, I am a long time reader and 1st time poster :-) I would appreciate if you can let me know if the P182 case will accommodate: > 9800GTX+ > Thermalright HR-01 Plus > Corsair HX520 Is that going to be a very tight fit? The model for the video card is 512-P3-N871-AR (i believe this is the s...