Search found 42 matches

by Merlinen
Thu Mar 29, 2012 12:40 am
Forum: SPCR Article Discussion
Topic: Logic Supply LGX AG150 Fanless Mini PC
Replies: 31
Views: 8714

Re: Logic Supply LGX AG150 Fanless Mini PC

Drivers for the chipset or what drivers do you mean? Product family Chipsets Product line Embedded Chipsets Product name Intel® NM10 Express Chipset Operating System Windows 7 (64-bit)*(5) http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20775&ProdId=3304&lang=eng&OSVersion=Windows%207...
by Merlinen
Wed Mar 28, 2012 11:20 pm
Forum: SPCR Article Discussion
Topic: Logic Supply LGX AG150 Fanless Mini PC
Replies: 31
Views: 8714

Re: Logic Supply LGX AG150 Fanless Mini PC

Hmm you say it have no 64bit support.

But if you check Intel's spec for the CPU it have "Intel® 64".

http://ark.intel.com/products/58917/
by Merlinen
Wed Apr 27, 2011 1:21 am
Forum: SPCR Article Discussion
Topic: Antec ISK 100 Mini-ITX Case
Replies: 19
Views: 7930

Re: Antec ISK 100 Mini-ITX Case

Any chanse to fit a Scythe Big Shuriken in this case??

If you only use the Case fan and no fan on the heatshink??
by Merlinen
Tue Dec 15, 2009 4:53 am
Forum: Power Supplies
Topic: how much could i run with a 400w power supply
Replies: 8
Views: 2001

With a Corsair 400w i did run this with some OC.

Core i7 920@3.4Ghz
Asus Maximus II gene
Corair 3x2gb XMS3
2 x Radeon 4770 crossfire
Intel X25-m

That machine did peek at about 330w.
by Merlinen
Fri Dec 04, 2009 8:44 am
Forum: CPU Cooling
Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
Replies: 40
Views: 34381

Ok, so i did remove the NB Zotac sign and did move the CPU fan abit closer to the NB and my new temps are after 2h Linpack+Furmark: CPU: 67c GPU: 90c HDD: 37c Can't fit any fans were the 2x80mm fan bay was. Gona watch a bluray movie and se the temps after a movie. this is the exact same setup i'm lo...
by Merlinen
Tue Dec 01, 2009 11:41 am
Forum: CPU Cooling
Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
Replies: 40
Views: 34381

Ok, so now i have got my Antec ISK-300 case :) So first atempt is to fit everything with no mods. I did remove the orginial PSU sins i am gona use my picoPSU and i did remove the side fan mount (don't think i need any more fans). Here you can see that some of the top part of the case is touching the...
by Merlinen
Tue Nov 24, 2009 11:43 am
Forum: CPUs and Motherboards
Topic: New version of Zotac 9300 ITX
Replies: 23
Views: 24630

New version of Zotac 9300 ITX

Did youst see a new Version of the Zotac 9300 board that have some new whanted fetures :) GF9300-G-E (PCB04) has the following differences from earlier PCB versions: DVI is Dual-Link, not Single-Link; S/PDIF header added to board; 3x SATA instead of 2x SATA; CPU/RAM undervoltage now possible (overvo...
by Merlinen
Tue Nov 24, 2009 11:33 am
Forum: CPU Cooling
Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
Replies: 40
Views: 34381

Nopp, i still haven't find any Antec ISK-300 in stock :(

That case is realy hard to find atm :/

Edit:

Now 1x Antec ISk-300 is on the way :)

Will post some pics ASAP when i get it.
by Merlinen
Wed Nov 18, 2009 9:32 am
Forum: CPU Cooling
Topic: Undecided on low-profile CPU cooler
Replies: 6
Views: 2091

Go for the Big Shuriken, it works geart for me on my ITX htpc.
Cool my E7200 silent and cool :)

viewtopic.php?t=55204
by Merlinen
Wed Nov 11, 2009 3:31 am
Forum: CPUs and Motherboards
Topic: Socket 1156 / mATX & Coolers
Replies: 2
Views: 1460

My "old" computer was built on the Gigabyte p55m-ud4 and i did use a Zerotherm NV120 and have no problems with space betwen it and my GTX 280 in the first PCI-e 16x slot.
by Merlinen
Mon Nov 09, 2009 4:50 am
Forum: Watercooling
Topic: water + i7 + sff
Replies: 15
Views: 7156

Well 72c is imo more than OK after 18h of linpack on a i7 920 (@4200Mhz).
Usually i never se temp over 65c after 6-10h of gaming or 3d cad rendering.

If i remember correct my i7 920 did run with Stock cooler at stock speed at about 75-77c after a few hour on linpack.
by Merlinen
Thu Nov 05, 2009 11:05 am
Forum: Power Supplies
Topic: New PSU for Antec NSK1300
Replies: 12
Views: 4611

Ye if it is rated 220w it's abit to close :/

Think i am gona try the "Chieftec DPS-300AB-9C 300W" can get it for less than 40€ inc shipping.
by Merlinen
Thu Nov 05, 2009 5:34 am
Forum: Power Supplies
Topic: Looking for a quiet PSU option in Antec Fusion case
Replies: 7
Views: 2145

My old HTPC was with a Antec Fusion and Corsair CX400 and the did work fine, only nois that did come from the case was my 2.5" hdd. It dosen't mather that the CX400 have tons of cabel that you don't need sins the case is "split" in 2 part so it is only the ODD+PSU on the left side. Did use a Scythe ...
by Merlinen
Thu Nov 05, 2009 1:16 am
Forum: CPUs and Motherboards
Topic: ITX board for NAS/FW server ??
Replies: 7
Views: 2167

Re: I have that case

I have the chenbro case, the motherboard I got for it is this one: http://www.logicsupply.com/products/ms_9832 It has 4 sata ports, but I added a half-height pci sata board (using the riser http://www.logicsupply.com/products/80h094340 ) to add 2 more ports internally for the 2.5" and the optical d...
by Merlinen
Thu Nov 05, 2009 12:56 am
Forum: Power Supplies
Topic: New PSU for Antec NSK1300
Replies: 12
Views: 4611

If you have observed 220W power draw from the wall and your PSU is 80% efficient (the current standard for good PSU's), then your system was drawing only a maximum of 176W. So that is well within the capacity of Dell DA-2. Uday I did test on a PSU that is 80+ Gold (90%) and at the wall i did show a...
by Merlinen
Wed Nov 04, 2009 4:29 am
Forum: Power Supplies
Topic: New PSU for Antec NSK1300
Replies: 12
Views: 4611

Ye, antec use some special form factor, but the SFX is small enuff to fit insde the case and still enuff room for e decent CPU cooler.

From the back side to the HDD/ODD holder it is about ~120mm and this SFX is 100mm.

And SFX is 125mm wide and the orginial PSU is about 160mm.

So it shud fit easy.
by Merlinen
Wed Nov 04, 2009 2:25 am
Forum: Power Supplies
Topic: New PSU for Antec NSK1300
Replies: 12
Views: 4611

Ye, both the Winmate board and usual PicoPSU is to week, the system take about 180-220w on full load. Gona check out that topic. Edit: These two PSU i have looked at: http://www.be-quiet.net/be-quiet.net/index.php?StoryID=556&websiteLang=en http://www.chieftec.eu/index.php?option=com_content&task=vi...
by Merlinen
Wed Nov 04, 2009 1:28 am
Forum: CPUs and Motherboards
Topic: ITX board for NAS/FW server ??
Replies: 7
Views: 2167

Sure it can me mATX if you can find a case that is with in these dimensions (w:150 h:300 d:300 mm) and have hot-swop or easy access for 4x3.5" disk, can't fit any bigger case were it's gona stand. Was planing to use the Chenbro ES30068 case. 4x disk for storage and 1 for OS. www.itxdepot.com don't s...
by Merlinen
Wed Nov 04, 2009 12:29 am
Forum: Watercooling
Topic: water + i7 + sff
Replies: 15
Views: 7156

for an i7 alone your going to need more then a 120mm rad. No 1x 120mm is enuff. I am atm building my setup inside a Coolermaster Elit 340. I am testing if i am only gona run 1x120mm rad or 1x240mm rad och both. 1x120mm rad with 2x120mm Nexus@7v in puss-pull config and i am running the CPU @4.2Ghz i...
by Merlinen
Tue Nov 03, 2009 11:41 pm
Forum: Power Supplies
Topic: New PSU for Antec NSK1300
Replies: 12
Views: 4611

New PSU for Antec NSK1300

I did get a hold Antec NSK1300 case but the PSU inside it is broke. So now i am looking for a new PSU that can fit in the same place as the old one or between the motherboard and the front panel of the case. It need to power this setup: Q9300@3.0 Gigabyte G41 motherboard Ati 4850 or 4770 2x3.5" HDD'...
by Merlinen
Fri Oct 30, 2009 5:16 am
Forum: CPUs and Motherboards
Topic: any Socket P MotD mobo's out yet?
Replies: 126
Views: 83619

Have totaly missed this thread :)

Anyone here know where you can buy "Gigabyte GA-6KIEH-RH" in Europe ??
by Merlinen
Fri Oct 30, 2009 4:43 am
Forum: CPUs and Motherboards
Topic: ITX board for NAS/FW server ??
Replies: 7
Views: 2167

ITX board for NAS/FW server ??

Hi. I am looking for a ITX board that have 5 or more Sata port and 2xGbit lan. Or 4 sata + 1x mini pci-e slot (can use a pci-e SSD for system disk). Neet to be atlest a atom 330 och higher. The motherboard that fills all my need is Gigabyte GA-6KIEH-RH BUT i can't find any shop that sell it inside E...
by Merlinen
Sun Sep 20, 2009 12:46 pm
Forum: CPU Cooling
Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
Replies: 40
Views: 34381

Re: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]

lucky-dirk-henning wrote:Hi Merlinen,

this is a very nice and interesting post of yours.

Could you perhaps indicate the exact part number of
that low profile Kingston ram you have installed (KTH - ????)?
I can't read it in your picture.

Thank you very much.
It is :
KTH-XW4400C6/1G
1.8V
BKME0850932
by Merlinen
Mon Sep 14, 2009 2:33 am
Forum: CPU Cooling
Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
Replies: 40
Views: 34381

Re: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]

So i did get my Big shuriken to day and i have read that it is some problems mounting it on a Zotac 9300 itx board. I am still missing my blu-ray and case for my HTPC :) Setup is: Zotac 9300 C2D E7200 PicoPSU tx150 and so on (se my sign). I am running the fan in 720rpm, and it's realy inaudible. Hi...
by Merlinen
Sun Sep 06, 2009 11:10 pm
Forum: CPU Cooling
Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
Replies: 40
Views: 34381

I did try and rotate it 90 degres but you can't.
To get this to work you need to mod the chippset cooler, it's not much you need to mod but still.

It is the mounting bits that takes into chippset cooler.
by Merlinen
Fri Sep 04, 2009 4:46 am
Forum: CPU Cooling
Topic: Scythe Big Shuriken + Zotac 9300 ITX [TONS of pic's]
Replies: 40
Views: 34381

I will, but Antec ISK300 ain't easy to find atm in Sweden :(

http://www.prisjakt.nu/produkt.php?p=445874
by Merlinen
Thu Sep 03, 2009 1:14 pm
Forum: CPU Cooling
Topic: When will Intel release 32nm desktop cpus?
Replies: 13
Views: 3642

Ghz ain't everything, remember that :)

Clarkdale onley have ½ the L3 cache than a Lynnfield have + Lynnfield i7 have a much more agresiv turbo mode.

So clock VS clock i am 100% sure Lynnfield is easy gona out preform Clarkdale.

But onley time will tell.. :)
by Merlinen
Thu Sep 03, 2009 12:33 pm
Forum: CPU Cooling
Topic: When will Intel release 32nm desktop cpus?
Replies: 13
Views: 3642

Well depends on what CPU, don't think a Core i7 870 will be "obsolete" in a few month :) And Clarkdale looks more like low-end cpu, same with Arrandale. And Gulftown is realy high-end CPU that is gona start in a price range of 999$+ :shock: Don't see any1 that would replace the new i5/i7 Lynnfield C...
by Merlinen
Thu Sep 03, 2009 11:50 am
Forum: CPU Cooling
Topic: When will Intel release 32nm desktop cpus?
Replies: 13
Views: 3642

Clarksdale is 2 core and 4 threads with HT.
by Merlinen
Thu Sep 03, 2009 10:48 am
Forum: CPU Cooling
Topic: When will Intel release 32nm desktop cpus?
Replies: 13
Views: 3642

32nm is "Clarksdale" and as you can see on this chart it is onley for socket 1156.

http://www.guru3d.com/news/intel-core-i ... confirmed/