Here is my solution for this nettop; yes, I know it's not elegant like original, but it works fine without noise:

viewtopic.php?p=543452#p543452

Little update on my mini itx, consisting in a radical modification of the internal cooling system. At first I move the H50 on the top (fan configured extraction);it wasn't easy to install because the tubes of corsair touched SO-DIMM, so I had to place the radiator on the top, with the fan below: htt...

just a few days ago I decided to buy this nettop, to use as a small server and HTPC: everything has worked well, except for a "small" problem ... the noise! In fact, the mini fan that have to cool the CPU and GPU is immediately proved to be too noisy for my needs, so I decided to make a minor change...

at least the vga arrived (zotac gtx580), so I could finish my build: http://www.pctunerup.com/up/results/_201101/th_20110103133924_12.jpg http://www.pctunerup.com/up/results/_201101/th_20110103134026_13.jpg http://www.pctunerup.com/up/results/_201101/th_20110103134117_14.jpg http://www.pctunerup.com...

Hi to everyone: this is my little project based on Lian Li Q08; nowadays is still not complete, 'cause I' waiting for the vga (I don't know exactly which one..maybe cayman, if it fit ;) ) now, this is the hardware: case: Lian Li Q08 motherboard: asus M4A88T-I + enzotech mosfet cooling cpu: amd X6 10...

as you can see I did a config almost like yours, powered by a pico psu 150w, so I think you could do without problems.

http://www.youtube.com/watch?v=qH18o8Ugpak

for example my Commell LV-6789, that has 6 sata ports
but, for example, you can use a pci card to expand the sata ports on your mini itx.

http://lian-li.com/v2/tw/product/upload/image/pc-q08/q08-01.jpg http://lian-li.com/v2/tw/product/upload/image/pc-q08/q08-05.jpg http://lian-li.com/v2/tw/product/upload/image/pc-q08/q08-08.jpg Finally, the specs about this mini itx case (that can support standard atx psu and long double slot vga car...

That's an idea Eddy! any reason you used a slim Slipstream? Would there be any problems using a standard width 120mm fan? Also, any vibrations on the case with the fan mounted liek that? Thanks! I used a slim slipstream cause, as you can see in this foto http://www.pctunerup.com/up/results/_200911/...

Hey Cov, Any ideas on how to place a 120mm fan inside that its blowing out to the rear? I was thinking of this case for a WHS build. 2x 3.5" HDs passive m-ITX board (no cooler needed) Pico PSU No OD So have soem room to work with obviously. I just can't imagine where how to place a 120m fan. I don'...

That is what I put inside my Lian Li Q07B: cpu: intel q9400s dissipatore cpu: thermalright 120 ultra + noctua 120mm nf-p12 motherboard: commell lv-678 ram: 2x2gb teamgroup xtreem vga: club 3d 9600 green edition hard disk: 1x160gb western digital scorpio black + 1x320gb western digital scorpio black ...

ok, I tried last chance using a xbox360brick with pw-200-v.....nothing, it doesn'work. so I switch again to my pico psu 150xt+dell da-2 and all works great. here just a couple of photos of my new itx sytem powered by pico psu: cpu: intel q9400s dissipatore cpu: thermalright 120 ultra + noctua 120mm ...

Do you want to check if your 50W light can be directly powered from the Dell brick? That would tell you if the Dell brick is still working and has enough power. I did it and it works A second thing to try is to turn on the PW-200 without plugging it into the motherboard. You can do so by connecting...

Eddie, I hope you know that there is a 'remote' lead coming out of Dell DA-2 which has to be connected to ground in order to turn on the power brick? Otherwise, the power brick is on standby, signified by the amber light on the brick. Uday uhmmm...I can check again, but if so, why the dell works wi...

Little update. I found where is the problem; it's about the 12v that comes outside the dell-da2. maybe the pico psu 150xt is more tolerance than the pw-200-v, because it wotks perfect, but the 12v that comes otuside the dell is not right for the pw-200. here what I did: I connect a 50w 12v lamp to t...

reddyuday wrote: It is indeed odd that PW-200 can't a power a system that PicoPSU-150 can. Thank you for sharing this data with us.

Have you tried the Dell DA-2 + PW-200 on your system without the graphics card?

no, I didn't try that combo

Any more details on what you have observed? How did you connect he DA-2 and PW-200? I am afraid there are no other 200W, 12V power bricks known to us. HI; I connect the pw-200-v with dell-da2 with a 2,5 barrell, as you can see in this photo: http://www.pctunerup.com/up/results/_200909/th_2009092712...

Yesterday I tried to connect the pw-200-v with dell-da2...it doesn't work so, there are others 200w brick that I could use? thanks

alphabetbackward wrote:Do you have power measurements before using the 9600 GT?

no, sorry; but the additonal wattage of the videocard should be less than 60w.

I'm using a club3d 9600 green edition on my mini-itx system: commell lv-678 intel q9400s 2x2gb ddrII teamgroup xtreem 2x2,5" western digital scorpio black 1x bc-5600s powered by pico psu 150w. the card run good: the fan run only at 35%, but the temp are low: also the power consumption is low (it's a...

Another good mini-itx motherboard with pci-e 16x is the Commell LV-678

If it works without problem, why worry? The XT150 should be able to handle 130 W. Hi: yes, I could do it, but I'm a little afraid 'cause I'm near to the limit of the pico psu If you would like to lessen the load on your picopsu anyway, you could branch of the connection to your P4 header before the...

My actual config CPU : intel q9400s MOTHERBOARD : commell LV-678 RAM : 2x2gb DDRII teamgroup xtreem VIDEO : club3d nvidia 9600gt green edition HD : 2x2,5" 7200 rpm western digital scorpio black PHERIPHERALS : sony bc-5600s POWER SUPPLY : pico psu xt + Dell-da2 Idle: 70w Full load (cpu+gpu): 135w

Hi to everyone. actually I'm using a dell DA-2 + pico psu xt 150w without problems on this config: intel q9400s commell LV-678 2x2gb DDRII teamgroup xtreem club3d nvidia 9600gt green edition 2x 2,5" 7200 rpm western digital scorpio black sony bc-5600s during full load (cpu+gpu) the power is around 1...