Search found 27 matches

by yetidaddy
Mon Sep 19, 2011 2:12 pm
Forum: Deals, Vendors and Classifieds
Topic: FS: Cooler, PSU, and video card
Replies: 0
Views: 1358

FS: Cooler, PSU, and video card

For sale: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010 - $40 Come with Fan, watercooling part, 775/1155/1156/1336 brackets and screws. Dynex thermal paste. $40 to your door. HP Monitor Stand - $20 They can hold up to 22inch monitors. They have universal vesa mounts, so you can use...
by yetidaddy
Mon Sep 19, 2011 1:56 pm
Forum: Power Supplies
Topic: PicoPSU 150w power brick help
Replies: 1
Views: 1175

PicoPSU 150w power brick help

I tried mod a dell-da2 and it doesn't work. Luckily, I found a power adapter for my Shuttle Zen with 6-pin in two rows. I been plugging it straight into the picopsu and it works. But, it seem like there's not enough power. It is 180w - 12v and 15a but it can't power up an E8400. I've heard other pic...
by yetidaddy
Thu Jun 23, 2011 12:30 pm
Forum: General Gallery
Topic: small, quiet mini-ITX gaming build
Replies: 35
Views: 24519

Re: small, quiet mini-ITX gaming build

I like your logic of using huge heatsinks in small systems. But, how are you able to find the right heatsink for your use? I'm getting an Raidmax ITX case, dimensions 9L 11W 4H. You don't care about USB 3.0 at all for the future? I want to get a MSI H61M-P23 (B3) Or AsRock MB Please help me get cpu ...
by yetidaddy
Sun Jun 19, 2011 4:44 pm
Forum: General Gallery
Topic: small, quiet mini-ITX gaming build
Replies: 35
Views: 24519

Re: small, quiet mini-ITX gaming build

I wish I found this before I built my machine, because I had the same problems as you did and same goal. I wanted eyefinity + gaming + htpc. I finally did it, but it took so long to dig up informations and buy those parts. My machine: Intel E5200 Biostar G41-M7 MATX mb 2gb G.Skills Ram x 1 160gb 2.5...
by yetidaddy
Sun Aug 08, 2010 10:07 am
Forum: Power Supplies
Topic: 150 XT + Dell DA-2
Replies: 9
Views: 5928

I'm can get into the bios and play with different settings but I leave the voltage section alone. So I'm not sure what is the proper reading. My brother said something about if I split the 12v wire to three parts for each of the dell-da-2 holes (pins), then it would be 12 x 3 = 36 watts. I took the ...
by yetidaddy
Sat Aug 07, 2010 9:05 pm
Forum: Power Supplies
Topic: 150 XT + Dell DA-2
Replies: 9
Views: 5928

FIXED:
I think I rewired it wrong. My brother fixed it when he got home today. I might post it in the gallery section later, who knows. CPU Temps at 45c after 2 hours of gaming, youtube, and web searching. 35c System Temps.
by yetidaddy
Sat Aug 07, 2010 6:35 pm
Forum: Power Supplies
Topic: 150 XT + Dell DA-2
Replies: 9
Views: 5928

Thanks for the pics strid. I thought it was a virus because it restarted on its own and i wasn't able to go into bios for awhile. The case is an Evercase found here. I'm using stock cooler because I wanted to see that it works with the picopsu, or else this project is for nothing. This is how I conn...
by yetidaddy
Sat Aug 07, 2010 9:00 am
Forum: Power Supplies
Topic: 150 XT + Dell DA-2
Replies: 9
Views: 5928

when I use the 175w I use the computer for hd movies, youtube, games for 4 hours and restart it and the temp would be 50c.
by yetidaddy
Fri Aug 06, 2010 4:10 pm
Forum: Power Supplies
Topic: 150 XT + Dell DA-2
Replies: 9
Views: 5928

150 XT + Dell DA-2

I had successfully mate the Dell-DA-2 to power up my picopsu 150w. But it only worked for a couple of days. A week ago, I was playing some youtube videos and the computer restarted on its own. The reading on the cpu temp was climbing to 80c and the system temp was only 30c. I feared it was a virus s...
by yetidaddy
Fri Jul 16, 2010 7:39 pm
Forum: Power Supplies
Topic: Mating Dell DA-2 and Pico power supplies
Replies: 11
Views: 17079

hi, I'm really sorry to bring up an old topic but I tried to talk to engineer and my brother who knows how to solder and no one knows what I'm trying to do. I'm going to try the method like Atheara's post but I took some of his recommendations and ordered the mini-jr female-female. It been 3yrs for ...
by yetidaddy
Tue Jun 22, 2010 5:21 pm
Forum: General Gallery
Topic: Antec NSK1300 with PW-200-V DC-DC and Akasa Evo-120
Replies: 22
Views: 50635

Image

I went to radioshack and I couldn't find the 2-pin header that you use for the trigger. But, are these ok?
by yetidaddy
Tue Jun 15, 2010 9:05 am
Forum: General Gallery
Topic: Antec NSK1300 with PW-200-V DC-DC and Akasa Evo-120
Replies: 22
Views: 50635

so you only use 6 wires in your 8-pin connector?
3x blue and 3x black?

I was confused because in the guide you said you left 1-4, and 13-16 so that means you have 8 wires and I was wondering what you did with the extra two since I only see 6 wires in your pictures.
by yetidaddy
Sun Jun 13, 2010 2:14 pm
Forum: General Gallery
Topic: Antec NSK1300 with PW-200-V DC-DC and Akasa Evo-120
Replies: 22
Views: 50635

sorry, i have the pw-200-v. I made sure i ordered this one after reading this so that we have the same pcb holes and etc. I see, so you cut the black and white cable and connect the white to the blue cables and the black to the black cables. That's 6 cables. The other two you just left it alone? Tha...
by yetidaddy
Sun Jun 13, 2010 9:30 am
Forum: General Gallery
Topic: Antec NSK1300 with PW-200-V DC-DC and Akasa Evo-120
Replies: 22
Views: 50635

I understand the 12v wire and the ground wire. But what did you do with the ATX 24pin's PIN 4(5V) and PIN 16(PS/ON) ? And there are 4 PCB holes on the pw-200. The 12v blue goes through one, black ground goes through one. What about the other two, the ground and the 5v ? I wish I knew this sooner tha...
by yetidaddy
Sat Jun 12, 2010 9:56 pm
Forum: General Gallery
Topic: Antec NSK1300 with PW-200-V DC-DC and Akasa Evo-120
Replies: 22
Views: 50635

hi, I'm sorry but i'm slowly getting the guide you provided. To explain what I understand so far: I need cut the wires from a dead 24 atx psu. Take three wires and combine them together then solder it to the 12v hole in the pw-200 that's empty. Repeat with three more wires and solder them to the gro...
by yetidaddy
Fri Jun 11, 2010 4:42 pm
Forum: General Gallery
Topic: Antec NSK1300 with PW-200-V DC-DC and Akasa Evo-120
Replies: 22
Views: 50635

Yes, the P4 is what i meant, I'm sorry I didn't know the term.
I looked on newegg and your motherboard uses a P4 connector too do you use the P4 cable?
by yetidaddy
Fri Jun 11, 2010 3:59 pm
Forum: General Gallery
Topic: Antec NSK1300 with PW-200-V DC-DC and Akasa Evo-120
Replies: 22
Views: 50635

hi, im sorry this is an old thread. I thought i could do it that's why I bought all the things required. What I have so far is the PW-200-M but where's the extra 4pin required for new motherboards? And it only has two wires, where did those blue and black wires come from? I haven't receive my dell a...
by yetidaddy
Mon Jun 07, 2010 6:48 pm
Forum: Deals, Vendors and Classifieds
Topic: 130W ATX power supply + 120W AC adapter 54$
Replies: 153
Views: 124900

Is this enough power for:

Intel E8400
Biostar G41-M7
2GB x 1 Viper DDR2-800 RAM
2.5 SATA HDD
ATI 5570 if yes:
Galaxy 9600 GT(No 6-pin needed)

And
Future build
MITX or MATX i3/i5 board
Core i3 530
2GB DDR3-1333
2.5 SATA HDD
ATI 5570 if yes:
Galaxy 9600 GT?
by yetidaddy
Mon Jun 07, 2010 5:31 pm
Forum: Video Cards & Monitors
Topic: Can a ATI 5570 play starcraft 2 beta?
Replies: 11
Views: 4970

i haven't done that project yet because it will turn out to be $400-$500. And small minor things like that HSF. Im using a S775 matx motherboard with that case. I hope I can find a cheap i3 motherboard with 9in x 7in dimensions. I forgot that mini-itx mb have a problem with the stock HSF, thanks for...
by yetidaddy
Mon Jun 07, 2010 11:00 am
Forum: Video Cards & Monitors
Topic: Can a ATI 5570 play starcraft 2 beta?
Replies: 11
Views: 4970

I'm looking for something that a pico-psu 150w can power. I don't think I have enough space for that 5770 either lol. Saw a HIS 5570 for $60 ar, should I get it?
by yetidaddy
Sun Jun 06, 2010 8:00 pm
Forum: Video Cards & Monitors
Topic: Can a ATI 5570 play starcraft 2 beta?
Replies: 11
Views: 4970

thanks. I wasn't sure it was enough, and I just saw a galaxy, zotac, sparkle 9600 GT with low brackets too.

case

core i3 530
Intel H57 mini itx motherboard
by yetidaddy
Sun Jun 06, 2010 5:34 pm
Forum: Deals, Vendors and Classifieds
Topic: SALE: PW-200-V PicoPSU
Replies: 0
Views: 1424

SALE: PW-200-V PicoPSU

I bought this for a project with Dell-DA-2 but I'm having problems with the soldering. The wire were cut but I can solder them back together.

For sale, as is. $30 shipped takes it or best offer.

heatware: tng333
by yetidaddy
Sun Jun 06, 2010 5:21 pm
Forum: Deals, Vendors and Classifieds
Topic: Zotac LGA775 + Geforce 9300 mATX = $69.99 AR
Replies: 3
Views: 1486

ohh i thought it was the mini itx one. THat would've been a deal for me.
by yetidaddy
Sun Jun 06, 2010 5:10 pm
Forum: Video Cards & Monitors
Topic: Can a ATI 5570 play starcraft 2 beta?
Replies: 11
Views: 4970

Can a ATI 5570 play starcraft 2 beta?

Im building a sff m-itx pc that i can take around with me. I think that is the best low bracket video card I can get. I was wondering if that will play starcraft 2 when it comes out. At least on 1024 resolution?
by yetidaddy
Sun Jun 06, 2010 5:07 pm
Forum: Power Supplies
Topic: New products - PicoPSU-150-XT, PicoUPS-100
Replies: 31
Views: 30179

I'm sorry i don't know anything about voltage.
Would this work with the 150-XT ?

100V - 240V~2.5A 50-60Hz for Worldwide use.
19V - 9.5A
180W

It has a 4-mini-DIN out already, and with the mini-fit jr to mini-din adapter, would it work if i just plug it in?
by yetidaddy
Sun Jun 06, 2010 4:12 pm
Forum: Deals, Vendors and Classifieds
Topic: Zotac LGA775 + Geforce 9300 mATX = $69.99 AR
Replies: 3
Views: 1486

very nice
by yetidaddy
Thu May 06, 2010 7:25 pm
Forum: Cases and Damping
Topic: Antec ISK 300 Mini-ITX case
Replies: 115
Views: 88026

hi. I'm trying to build a mini itx system and attach it to my monitor. I'm trying to run a system with pci-express and mount. But, every case I come upon either has mount and no pci-express or pci-express and no mounts. What trick did you use to mount your antec isk300 to the lcd tv like that? Also,...