I use my 7000ALCU to cool my e4300 @ 2.7ghz. Using TAT stress test it goes upto 70C+ (at which point I get worried and stop it). Mine is modded with a nexus 92mm at 12v (almost inaudible in my system), which gives slightly better results than the zalman stock fan @ 5v. I'm about to change it to an u...

Ah cheers for that, really helpful.

Well, I think i've finally realised 70C after a couple of minutes is a bit too hot for my core2duo @ 2.7ghz with zalman 7000ALCU. Looking to replace it with a thermalright ultra-120 really, since I can get that for £25 delivered. I can actually get the ninja for £27 delivered but after realising I...

Hi, About to do my c2d (E4300 + P35 board) setup, just waiting on ram to arrive. One question though, I've an old zalman 7000ALCU (modded with a nexus 92mm) which I had planned to use, bought the ZM-CS1 clip , which allows the 7000 series to be used on LGA775. I've actually roughly estimated using t...

Been out of the loop for a while now. Currently running A64 3200+ winchester, 1gig (2x512mb), 2 hds, 2 optical drives, r9700pro, 3x pci cards on an old atx1.x Seasonic SS-300GS (same as an SS-300FS if anyone remembers those - about 5 years old now). This is rated at max 15a and 18a peak on the +12v ...

What I want to know is how did you use the CoreCenter program to alter the NB fan speed? I have version 1.7.3.0. When I click on the "CoreCentre" text it allows me to choose "Cool n Quiet" or "User Mode". When I select "User mode" it only allows me to alter the CPU fan speed. That is how I set the ...

A CWT BDP-450w (Antec smartpower clone) I had a few years back just went out with a loud bang when I powered my computer up, luckily it took nothing with it, except the fuse in the plug. It was modded with a single Panaflo 80mm L1a @12v (in place of high speed dual fans). Actually my current Seasoni...

I had a 120mm Fortron 300w FSP300-60PN(A)PF, the fan controller spun up to 8-9v at a fairly moderate load, it then stayed there and was loud to be fair. The fan that was in mine was a Yate Loon 120mm D12SM-12 but was a slightly different fan from what we normally see, the fan hub is bigger and is no...

Is it hard to find out who the peolpe ordereds are questionable? Isn't it easier to send out an email to the few that are in question? I think I'm one of these people as I received an email this morning (GMT). I'm happy to only accept 4 (as opposed to my original order of 11), so others can get the...

my 15A 300w fortron (with 120mm evercool @5v), ran an athlon64 overclocked (2.0ghz to 2.4ghz), a r9700non pro (had no problems at very high clocks 405/324), 2 hard drives, 2 optical drives, sound card, tv card etc. All completely fine. As does my current 'older generation' Seasonic SS-300GS (similar...

Oh sorry yeah, totally forgot the link!

But mathias has kindly provided it.

Also I thought the 80mm nexus' were made by bisonic?

Ok after reading THIS thread and sticking the nexus' 92mm fan model (without the -3 at the end) into google, one result came up with a site selling these for $4.50 + shipping. I know people aren't as interested in 92mm fans as their 120mm counterparts. But there are still a handful with only 92mm av...

I replaced the stock fan on my 7000ALCU last week with a nexus 92mm. With the nexus tested shortly before as the exhaust fan, it was very quiet but just audible at 12v in my system. After cutting it out of it's frame and mounting into the zalman (with a layer of sponge between the fan and the fan mo...

I'll let you know further Neologan when I've received them and been charged all the customs and VAT.

I think it will be under £7 inc postage per fan though, maybe £6.

I've ordered 11 of these Yate loon orange fans to be shipped to me here in the UK, postage was $28. I've already paid by paypal so I hope I don't run into the problems you were having Neologan. By the way I won't need all 11 so if any UK people need any (I think I'm keeping 4 for myself), you can ha...

Yeah unfortunately she only sells panaflo fans too, which I'm not too sure are even the older Japan Panaflos. The china 'flos are seem to be worse in bearing noise and other such noises judging from other people's experiences in this forum. Even one of the japan panaflo's I bought from her clicks, b...

I recently done the L1A mod to an SS-300GS (similar to FS), i find the fan spins up after 15-20mins (cant remember if it was idle or stressed). But it wouldnt have been more than 100watts DC. This is with a psu duct from a front drive bay, and rear fan grill removed. I also measured the fan's voltag...

Ordered a 92mm nexus to mod my zalman 7000 from koolnquiet on thursday and arrived today. Good customer service, nice guy that runs it too. BUT their site still doesn't accept online ordering, he has to contact you after making the order to arrange payment. Not too much of a big deal though, just st...

Well it arrived today and I just fitted it, turns out it is actually an SS-300GS. Here's a pic of the label: http://tsk.fragmania.net/SS-300GS.jpg My pc is a lot quieter now at idling (modded 120mm evercool at 5v on an fsp300 before), I think it does have the seasonic s2fc fan control, I know for su...

Yes, I run my AMD 64 Winchester3200+ (slightly overclocked to 2.2ghz) + MSI K8N Neo2 on a fortron 300w psu. Read half way down the page here for my findings using a "kill-a-watt" meter. edit: oh and my fortron 300w has only 15A on the +12v line. Also run the northbridge fan at half the speed using c...

NeilBlanchard wrote:Hello:

The low speed Yate Loon (1350RPM vs the Nexus' 1000RPM) is available for $8 + shipping (and they do ship to where you are, apparently)

Yeah, unfortunately it's $20 to ship one fan to the UK, which makes $28 (~£15) delivered, more than what we can get the nexus delivered for (£14).

Tell me- how quiet really is the AC unit for the 9800? I know this is a subective question, but considering the rest of my components (all Nexus silent fans, Seasonic Tornado 400 PSU, Zalman HD iso-mounts, XP-90 w/ Nexus 92mm, etc.) I think you can get an idea of what I'm looking for. Unfortunately...

I run an 9700np with a VGA silencer rev3 and have the MSI K8N Neo2 northbridge fan set at 4/8 speed in corecenter (and close it after booting).

Inaudible here

Anyone own or seen one of these before?

I just won one on an ebay auction, i know it has Active PFC and offers the same power specs as the SS-300FS (thanks to dodgy polish translations).

Google returns very little results, I just hope it has a p4 connector and s2fc fan control ;/

I actually own a few San Ace 120x38mm fans,

They're around that spec, I cant remember exactly what the cfm and db were. Something like 105cfm and 39db anyway.

At 5v they emitted motor noise, so not great all in all.

Nice one,

Thanks very much.

Thanks but I had read that already.

I was interested in their methods of mounting this particular fan to the 7000.

Ralf Hutter and burcakb

How and at which bits did you both cut the fan from the frame?

And also how did you mount the fan to the zalman 7000?

Thanks

Do you think the Nexus 92mm would be a good replacement for the zalman 7000 ALCU stock fan?

How would it compare at 12v to zalman's stock fan at 5v (lowest fan mate setting) for airflow and noise?

I just ordered two. :D I hope they live up to all of the hype! how much was shipping to the UK? Showed up as $20 via USPS to me. How many did you order? $19 USPS to Turkey for 4 pieces ??? If you're referrring to me, then none, as it's more expensive (not by much) including shipping than the nexus ...