I recently splurged on a new Evercool Plastic Fan for my Fortron 350-60, it had the same specifications of the Evercool Aluminium Fan but for half the price! Turns out that it was way louder than the stock Yate Loon fan (both fans were running on 5v) with horrible clicking and bearing noise (bad sam...

have you been living under a rock, dude?

I've cut out the exhaust stamped grill on my lian li (with nail clippers, took a while) and it has dropped my case temp by 3°C, btw my fan is the stock adda low speed fan. I put a standard metal chrome grill over the hole and i think this reduces the airflow noise...acting as sort of a muffler trapp...

Does the HDD touch the sides of the 3.5 bay and therefore vibrate it?

QUIET FOLDING FARM

http://space-simulator.lanl.gov/

I've had this problem with an el cheapo PSU, all that was causing the buzzing was that the 20? pin mobo connector wasn't fully pushed into the slot on the board...

at the bottom of that page

I for one like noisey computer, when i turn my computer on i want it to sound like a jet take off!
i am Pro-Noise

The reason (i think) Windows takes longer to load is beacause of the precarious angle at which your hdd is. Ideally it should be perfectly horizontal or vertical (I have a lian li case and i just removed the hdd cage altogether and layed the hdd on some foam :roll: ) And another point, clean those w...

The main reason i bought my fortron psu (apart from the noise level) was because of the 120mm bottom inlet fan sucking heat from the cpu area, as suggested by AMD...flipping it upside down would go against AMD's suggested airflow path. But snice we're aiming for quiet operation, i.e slow spinning fa...

if you want the fan to spin quietly all the time, hook it up to a fan controller, cut the fan wires off the psu pcb and and splice it into a molex or 3pin connnector wire and put the connector into your fan controller. I've hooked up the 120mm fan in my fortron into my sunbeam controller and run it ...

YUP, it's an Evercool fan and i'm getting the non-metal version of that exact fan tomorrow to put into my Fortron 350-60PN (PF) /me jumps for joy

hi everydae, i have the same psu as you and i've just ordered a 120x120x25mm evercool fan (not the aluminium one) model # 12025 M12S, when i get it tomorro i'll tell u if it's good

that yate loon fan is piece of s***!

i live in the UK and i can't find the evercool 120mm aluminium fan anywhere...would the normal evercool 120mm fan (25mm thick) be just as quiet?

On the way to a slient pc i bought a Fortron 350-60PN (Maplin code A07BF) at the same time i bought a Sunbeam Fan Controller. Upon hooking up the Fortron i found it to be quiet, quieter than my generic 350W psu, except when i put the system under load the fan ramped up and was equally as loud as the...

hey there, i'm kinda new here but i'll help you out as best i can :wink: i think it will affect it quite a bit especially if it's your system disc your programs and OS will take ~25% longer to load (using very crude logic) BUT it will be quieter than 7200rpm I don't know if V80 is as quiet as P80......

hi all i only just recently found out about this site and i love it! i've bought myself a samsung P80 hdd and have suspended it using Aphonos' 2-Drive Suspension method... i have noticed the hdd sways from side to side quite a bit whenever i touch the case, tap on the desk, type on keyboard etc does...