thx, also mine it's.

And what about the noiseblocker Sx1?

where is your papst made?

Germany or Hungheria?

http://www.hartware.de/review_362_1.html

another one

thank you for your answer

http://www.dirkvader.de/frame.php?site= ... quiet.html

here's a review, what do you think?

Any idea about this power supply?

I saw models with one or two fan...
I saw models from 350w to 520w...

both at decent price...

no it's not a volt problem... the clips are terrible

I'm using an sp94 + y.s. tech xxx52b @ 7v on mu p4 2.8, the fan it's very very silent if decopled so I have two pieces of rubber betwen the heatsink and the fan... but the problem are now the clip...

any idea?

thank you, I can get it in Italy or in UE.

They said it's identical to the tagan.

antec? antec is not true silent.. I always read in a few reviews th the tagan is more silent than the zalman too... On this forum I read some versions head problems but they told it was silence

Ok, i don't have an high load with my configuration so I think the 380w it's enough; and I also have exausth fan for the system heat

but the cpu temperature or the power supply?

thx

thank you.
I read that tagan is very hot... it is true?
Any other 8x8cm psu?

What about tsp?

In order to have silence it is better to have a "bigger" psu or a little one?

The system is a p4 2.8 with radeon 9600pro... nothing above 130w-140w...

http://www.deepoverclock.com/shop_image ... 17bed6.jpg

here's the case, I can I solve this problem?

Thx for your answer. For 46€ I can buy a silentmaxx complete damping kit for a chieftech, but the problem in that case are temperaturs... without the sidepanel the cpu temp do not raises above 47°, with the side panel it raises up to 56° and also the psu fan go faster... With a dumping kit... I don'...

Here's my configuration, without the right panel is very very silent, but with it makes echo... and a lot of strange noise -Chieftech miditower case without fan grills & with decoupled fans. -2 8x8 y. s. tech silent FD1281252B-2A @7v (1 rear & 1 front, in front of the disk on the case fluoor) -hd se...

ok.

So with a 12x12 fan PSU is better the keep the rear fan move air otuside the case?

did you tried without the rear fan?

I read that article but here in Italy the sp series costs less than a slk948u so I was a little confused

thank you for your answer

which one of theese? on a p4 2.8/800

And which fan (to keep at 5v)?

a papst 3412NGL or a noisblocker SE2?

PAPST:
92 mm x 92 mm x 25 mm
35.9 CFM
1950 RPM
23 dB(A)
1.2 Watt (0.1 A)


NOISBLOCKER:
92 mm x 92 mm x 25 mm
37.65 CFM
1850 RPM
22 dB(A)
0.83 Watt

Thank you for answering

Do you think that it's enough for this configuration? Is it quiet? -P4 2.8 -zalman cnps 7000@4v -2x 8x8 y.s. tech silent @7v -ati 9600pro with passive zalman hetsink -asus p4p800 + 2x256mb ddr400 -seagate barracuda V sata. -dvd-rw & dvd-rom I read under 150w it's very quiet... do you think my pc is ...

I'm using a zalman cnps7000 with a 5v rail + zalman fanmate conncted and it removes all the noise of the fan.

thank you. I'll make experiments.

thank you what's your configuration?

Ok, I got it, but in the nexus 3500 review of spcr they said that with both fan exhausting air the temp raise up...

so what's the best solution?

I'm goint to buy an antec BQE, I'm looking for the quietest 12x12 fan.

Which one of these two?

Hi there, I'm sorry for my english.
I have to mount this kind of psu with the fan up or down?
I ask this beacause I read that the psu with the fan down (just over the cpu zone) interacts with the case fan.