http://www.newegg.com/Product/Product.a ... 6817145657

This looks identical to my Venus DS-3's. I own 3. No problems, not too loud. Strongly consider Firewire - seems to work better.

I think I bought one of the last FS20's from Newegg about 5 years ago.. Will gladly buy another if anyone has any.

Love the dual exhaust - I have a 4 inch drier duct running from XP120 to the upper exhaust fan.

cpemma, thanks for your input. For those of us who're electronics-illiterate, could you please expound on that circuit diagram you posted? Given a parts list and a more picture-like diagram or a photograph), I believe I can solder that little guy together.. please help.

Thanks!

Greg

The backup utility I own, DriveImage 7.0, seems to have trouble with DVD's. Windows backup seems to have trouble with them as well. My recently purchased Seagate PATA drive came bundled with BounceBack Express, hardly a household name. Considering getting a copy of Norton Ghost 9.0. It seems it migh...

Right now, all the outrage on Capitol Hill smacks of Captain Renault's being shocked - shocked to find gambling taking place in this establishment!; only no one on the Hill has the talent . Inhouse pharmacy Ventolin inhaler pill pictures http://62.109.4.180/78.83.168.228/ventolin/1.gif I was watchi...

Sizzle, please comment on the noise output of these 1213C's once you install them.

It survived occasional bouts of 3d gaming in past, and died while I was away from the computer (only screensaver running). My guess is the fan broke spontaneously, leading to heat buildup and PSU failure

After 1.5 years of service my SilenX 400W 14dB PSU (genuine pre-scandal SilenX 400W 14 dB, Order #35) suddenly died. R.I.P. If anyone is interested in it for resuscitation or dissection, I will gladly part with it for the price of USPS shipping from Virginia to your location. I have ordered the Seas...

use Scotch-Blue Painter's Tape for Multi-Surfaces #2090. 2 inch tape, stays on metal and plastic for at least 2 years, no residue when removed, very easy to tear and apply with bare hands. Used to use a very similar 2 inch beige drafting tape but can't find any more. The beige tape I found recently ...

I've used 4 inch flexible drier duct (aluminized plasic over wire spiral). It's a chore to get it right, but if you stretch it before you glue it in place you can have all kinds of contortions in it without too many folds. Plus, with a 4 inch diameter, the votrexes caused by fold turbulence may actu...

Just cut a 4x4x0.5 inch Sorbothane square into 1x4x0.5 inch strips. The razor idea was a dud - the first strip took forever and the cut is jagged. Then I used common household scissors and got nice clean cuts every time! Bottom line: use sharp scissors. Oh, and I did freeze the square for an hour fi...

I've used the 120mm L1A's for years now, and they are very quiet. All start reliably at 6 volts and some even lower. Recently got a hold of 4 120mm M1A BX'es - they start reliably at 4.5 volts (maybe less, haven't checked). My samples do vibrate a bit more, but are still pretty quiet at reduced volt...

Yep, clothes dryer flexible duct. You will need two 120mm by 25mm fan frames on either side of the duct, attached with "goop" type glue to make duct terminators. Use the minimum length of duct possible to avoid coil bunching which will increase resistance. You will also need an Alpha heatsink and a ...

I used 4 inch drier duct and glued it to modified fan frames. Good exhaust flow if you take your time to set it up right.

The exhaust opening of axial fans is octagonal. Anything smaller will result in edge noise and obstruction noise both. I use a dremel with reinforced wheels. Don't forget eye and ear protection. I can't seem to get snips to cut right, but others have had good results. I prefer to grommet the entire ...

The 9800 Pro 256MB I just got is allegedly identical to an XT (it certainly BIOS-mods into one) and I got a Rev.3 VGA Silencer on it without any obvious trouble, even after overtightening the screws a bit.

cpemma, for the slow among us, could you translate the above circuit diagram into parts list and soldering directions? Something along the lines of "insert Tab A into Part B"? Pretty please?

Thanks!

Sheets of plastic may build up an electrostatic charge. Doesn't sound like a good idea.

I'm woried about wire breakage at the site of the old connector if the ribbon is accidentally folded across that area in the future. Will the cable work right if instead of removing the old connector we just ignore it and ADD another connector at the desired location?

Isn't that the Zalman 80D sink?

Can anyone verify receipt of a Rev.3 from Newegg?

I have a SilenX 400W, bought during the deceptive advertising controversy (no one cares now) and it is indeed very quiet. It sped up to an audible but tolerable noise level during GTA:VC sessions, but stayed quiet thru KOTOR and WC III. Keep in mind, I'm not a silencing purist. My system is not trul...

http://www.tech-mods.net/reviews.php?op=showcontent&id=121 Not much of a review, but the HSF gives me pause... will this thing be compatible with Zalman or AC Silencer? And another thing. The AIW 9600XT GPU is supposed to produce less heat than the 9600 AIW Pro, right? I wonder just how much less?

purchase la Acomplia cheap no prescription MayDay Msaquerade!!! A Benefit ofr Hokllis Hawthorne & Pre-Sphonngle Etxravaganza... Friday May 1stf in Williamsburg, rBookyln, Featuring Live Performances By: Disco Monkeys & Your oyfriend's Ban. http://78.24.220.30/174.57.248.186/acomplia/1.gif I knw Tel...

How about mattress foam (with sinusoidal surface texture), like the kind solid in bed-sized sheets at WalMart, etc?

Anyone else waiting for the AIW version of the ATI 9600XT to come out? And to cool it, either the upcoming Zalman ZM80-D (twin heatpipes) or the Rev.3 of the Silencer. Wish we had some solid release dates on these.

EndoSteel : You'd have to bag and tape off the rest of the graphics card and lap in small circular motions, right? Sounds like too much trouble even for me.. m0002a : I'm pretty sure I've described by undermounting contraption in detail in a couple of my old posts. Try the search function. My solut...

When I was choosing between 350W and 400W SilenX units (yeah, I know...) I was lead to believe that the 400W unit would run cooler and quieter under any given load, high or low. Well, I bought the 400W and it does run quietly, but I wonder if the 350W unit would do as well. The price difference is n...

The copper heatsink is adequate, but I ripped the plastic cover and the fan out of mine and undermounted a 92mm Panaflo L1 BX at 1200 RPM. The pin-springs that come with it do not provide adequate pressure against the GPU surface, but can be swapped out for machine screws. Just don't forget insulate...