waht about these ones. THey look like Yate Loon Fans

http://tekgems.com/Products/MJ-FN-120-BB.htm

I thiird that!

is your case cluttered..maybe your not getting god airflow.Got a pic of in side of your case?

if you mount the harddriv vertically, your pretty much building a wall in front of the fan. Better to have it horizonally so the air cal flow though it

well...i did the deed. Took off the drive rails on both sides of the HD's THe way I did this (and not recommended if you are not sure you still want to mount them the traditional way) is to open th back panel, rip off the rail from the back, and pry the rail off from the front. The plastic is stong ...

is it better to have high or low tension in the Stretch Magic wires? I used made it pretty tight. Does it make a difference, is there more possibility of vibration if the tension in the wire is tight?

:p it seems as though you convinced yourself that they get in the way. Yea, the do. I didn't want it hanging around, so i snippped it off, and attached the end wires toghether, then wrapped it in electrical tape. I just need an extension as my rear exhaust fan doesn't reach that far. I'm going to tr...

daba? suspended HD's are good in your system? Think you;ll ever use the drive rail again? If I do remove the drive rail (which i might do this weekend) I'll probably hack (cut into tiny pieces) out the other side, too if the suspension really makes a difference.

Hello all, I have FINALLY recieved my Orange 120mm Yate Loon fans. I cut off the molex connector from the wire. I didn't know how to do it, so I did 2 methods. 1. tried to fix it so that the wire goes directly into the fan connector. 2. cut the wire and tied it toghether and wrapped it in electrical...

Take a look at the sunbeam rheobus, its kinda ugly, but it works very well. I know alot of members here have it and highly recommend it. I dont like using PWM(?) ones cuz then you need to load the software and what not. There are advantages of them, but not for my specific needs. I like hardware con...

I would also like to know if the 36GB raptors have FBD bearings. and if so, starting when?

well, FWIW ihave some answers to my questions. 1. 120mm fan over the PCI slots doesn't work. a 92mm fan works good as long as your not using any PCI cards. Unfortunatley i have a sounscard, so I doubt that i'll mount a fan there. 2. mounting the harddrives vertical doesn't seem like a good idea anym...

thank you tekgems,

Glad that I wasn't one of them.

Is it hard to find out who the peolpe ordereds are questionable? Isn't it easier to send out an email to the few that are in question?

jmatucd, did u order from tekgems and not get a tracking number?

This is very unfortunate, I have went through 3 resellers and have run into this problem. Isellsuprlus, NCIX, and Tekgems (maybe?). It is very poor practice to not inform the customer about the error in the database. Both NCIX and isellsurplus did not contact me for over 2 weeks before they wrote ba...

The Orange Yate Loons from tekgems are an awsome deal even if you are in Toronto. If you want the 120mm Nexus fans, go to www.inmax.ca GO there in person. Just pretend that you want one. THen ask for a discount, then if she refuses, then say yu'll buy a few. I'm sure she will give you at least 1 tax...

I will test it out. I'll do it this weekend when I get a chance. I dont see my computer during the week :( I live on campus, and dont bring my comp down. I'll do it this weekend or when I get my Yate Loon fans. Since i'm gonna have to put in the fans anyways, i'll see the sound difference and let yo...

miks2u, thats very generous of you. I jsut saw this thing today. It looks awsome. I'd love to do a review, but feel that I am not well equiped with enough knowledge. I only have a 9600XT, and I guess would not be benificial as many have 9800 and above cards (or NVidia equivalent). I'll bump this thr...

As to the fan sucking air out of the case, I do have an alternative if it doesn't work...sort of! If/When I do decide to mod my case, when i have a few days to spare, I would drill out the rear exhaust, then I would drill 2 holes in the bottom of the case under the harddrives and put 2 120mm fans th...

daba, Nice looking case. I have the same one. Got some orange Yate Loons instead though. I do have one question, which I guess I can test out for myself, but wiating for my fans to come it. Isn't haveing the Intake fan in the front (the one for the harddrives) better to suck air out of the bay? My r...

This is an update for anyone who is listening (frankgehry :p) I FINALLY heard from isellsurplus. They said that they had inventory problems and they ran out of fans. They said that they just recieved a shipment in today. I sent in an email to cancel my order becasue I am very upset over their servic...

Ordered 10 from tekgems. I hope they get here soon. I ordered 3 from isellsurplus, and they both came to the same price. I wonder which has the better deal ?:p Anyways, I have been waiting for 2 weeks from isellsurplus with no word on what's happening. I hope that tekgems has better CS! I'll let you...

Well, this has been a very upsetting 2 weeks. I haven't recieved shipment from botth isellsuplus.com and NCIX.com. I just sent an email to NCIX to cancel my orderbecause at the time of purchase, they said that ETA was going to be Jan 28, it is now Feb 4 and they jsut send me a reply to me email sayi...

the problem is it doeesn't read the CPU fan speed. does ithe fan have the RPM wire?

wooglin, Sent you a PM!


If noise is really an issue. Get the Plextor. Theres a "silent mode" you can set the drive to. It works VERY well. As autoboy said "Silent costs money"

wooglin,

What program are you using? I use Acronis True Image, and seems to work well.

I"d get the plextor. Its an excelent drive and worth the extra money. Go on to www.cdfreaks.com (http://club.cdfreaks.com/forumdisplay.php?f=43) and hear what people say about the burner. It has some nice features to it such as Quiet Mode and GigaBurn, both of which I use constantly.

I ordered mine on 1/23/2005, and its still under "approved" and not "shipped" . I don't mind the waiting, but at least respond to me emails. I'd just like to hear from them so I know that they haven't went out of buisness

I ordered some from isellsurplus as well. It's been over a week. and it still says "approved". I sent them 3 emails as to why they already charged my account, but nothing has been moving since then.I I haven't gotten a response from them yet. I'll just wait patiently till they come, but like HammerS...

not cheap. After tax, $28 CDN (incl 3% cash disc.) ea. :0 are you serious. Thats more expensive than getting it shipped form BC. I think i've been there before, I believe that you can get a discount if you bargin with them a bit. Anyways, NCIX dropped their price by $1 since last week. But this is ...