35-45W consumption? Take 90W PSU then ) Always post links, pls, on what are you talking abt (PSU choice e.g.) Hi Ksanderash glad you are still on this forum. He is talking about the 220W I used and reviewed here that is available from more than one seller on eBay from some time is 20V 11A great qua...

Would I lose a lot in efficiency with the 220w if I only use 35-45w? I looked on ebay for a 4 pin 90 AC adapter, saw some sellers with the replacement 90w 2001FP, but I'm not sure which ones are reliable. The 220W is quite good so not to much maybe 1% or max 2% less efficient than a very good 90W A...

I did a little research and realise I would actually want a Y4, but I see where you say its not available. Could I get the 130w PSU and the 2.5mm panel mount connector and p4 cable (as in you attach the 2.5mm connector to the p4 cable). Will the following make a good adapter and at what voltage con...

Hi, Can the following system be powered by the convertor you selling? especially for 4 HDDs spinsups? 1. board - GA-D525TUD 2. ram - 1x2G DDR3 3. hdd - (its four HDDs) 4x3.5 old Maxtor DiamondMax 10 , 7.200 , 160G 4. 1x80mm case fan 5. 1x boot OS USB stick 6. 1x Slim CD/DVD RW Combo, like on laptop...

Deleted.

I saw the connection of two 130W PSUs you did a page back, selectively powering devices using the 20-pin connectors on both PSUs. You piqued my curiosity so I read more about the newer 24-pin connectors and the addition of the four extra pins to supply additional +3.3V, +5V, and +12V paths to the m...

I have an Apple power supply rated at 205W and 28V. It uses a DIN connector though the pins are "upside down" for your board. I suppose I could open the brick and re-solder them for this or use an adapter plug. Do you think this would be a wise choice for a power supply? I believe Apple used 28V in...

electrodacus , hi :) Basing on the results of this article , ATI 5770 draws not so much. Here is exact currents analysis: I just checked some reviews on 5770 and they measured 108W. Probably the power consumption depends on manufacturer and how they implement the GPU it also depend on how the power...

Deleted.

It's an ATI 5770. Steve This will use about 108W at load so you will need a PSU only for this so the other power supply will need to provide power for 3.4GHz AMD quad core probably 95W TDP do not know the exact model then is the motherboard (again do not know the model) but a guess will be 20W + 8G...

As long as I stay under the total wattage is there a limit to the number of HDD I can use in a small nas powered by your psu? I imagine I'd need plenty of Y splitters for the molex/sata power?? How about multiple fans? no there is no limit as long as you stay under the max power the PSU. The Low po...

Good news for international buyers is that I fond some new shipping box that is light enough to be under 250g I also removed the black power cable that most of you will not use.
So the shipping to Europe and other international destination is reduced from 18.95$ to 11.95$

I have a nice big heavy 24v power supply. At half load it puts out 24.1V at 10 amps no load 26V. Will this work? I want to use this with 2 Winmates on a modest high end system (8 gig ram, AMD 3.4Ghz quad and an ATI mid-range video card, SSD and 3.5" hard drive.) Sorry for answering so late but Yes ...

CPU performance vs TDP is not important if you want low power system. The CPU will not work alone it also need (memory controller + IDE or SATA controller and GPU as minimum) you will probably also need sound and network. If you need HD video playback then CPU will not be efficient at playing HD vid...

Hi! I'm also thinking of buying and adapter for this yet-to-be-built (budget) PC: AMD AM3 Athlon II X2 235e (45W max) J&W RS780UVD-MKII (ATI 3200 IGP, AM2+) 1x2GB DDR2 2,5 HDD Scythe Mugen 2 (+numerous external HDDs from a powered hub, shouldn't add significant extra) Two questions: 1. I have an un...

Hello, Actually I was wondering the same thing. Let's say the system draws about 80W at full load (broad estimate), we're using the IGP from the CPU of course. So you'd need in input: 80 / ( 0.88 ) = 91W DC assuming 88% from the circuitry. If you have a brick rated at 19VDC for example, it would ne...

I'm putting a new HTPC together: Gigabyte GA-H55N-USB3 motherboard Intel i3-530 CPU Corsair XMS3 4GB (2GBx2) DDR3 PC3-12800 1600MHz ram Samsung Spinpoint F3 1TB 7200 RPM 32MB Cache SATA hard drive APEX MI-008 Black Mini-ITX Case I'll be adding a DVD or Blu-ray drive in the future. Will one be enoug...

I currently have the Winmate and an Alienware 220W adapter. I plan to move my system into an Antec ISK300-65 case. The Antec case comes with the following adapter. Can I re-use this adapter or should I just mod the case to use the extension included with the Winmate. Yes you can reuse the cable fro...

As other mentioned will work with no problem. Namheul I do not know your system but if is just a simple i3 or i5 with one HDD and DVD then your values are wrong. What power meter are you using? Are you reading Watt or VA? And USB 3.0 is just 3x USB 2.0 as performance but also physical since is not u...

SOLD on eBay.

I added more benchmarks on first post.
One strange observation on CrystalMark is that with the VX855 + C7-M on memory test I get 600MB/s write and only 300MB/s read. I do not relay understand why.

I see there is no much interest here so I listed this on eBay Link

Hi! I'm considering buying a picopsu 150-xt to power up my nas/htpc (atom+4 green caviars). Do you think this little psu will drive enough power to boot it up? thanks! I think it will possibly work it depends on what atom board exactly you want to use there are lots of Atom CPUs and motherboards wi...

Is this enough power for: Intel E8400 Biostar G41-M7 2GB x 1 Viper DDR2-800 RAM 2.5 SATA HDD ATI 5570 if yes: Galaxy 9600 GT(No 6-pin needed) And Future build MITX or MATX i3/i5 board Core i3 530 2GB DDR3-1333 2.5 SATA HDD ATI 5570 if yes: Galaxy 9600 GT? The 5570 is using about 43W and the 9600 GT...

This looks like a very nice and well made product. Unfortunately, it wouldn't work in my system any better than the Pico150 that I tried, as it seems my Nova-T 500 TV tuner card draws too much current from one of the lines. I asked Hauppauge and they said it draws 7-10W from the 3.3v. Anyway, I'm u...

I'm sorry i don't know anything about voltage. Would this work with the 150-XT ? 100V - 240V~2.5A 50-60Hz for Worldwide use. 19V - 9.5A 180W It has a 4-mini-DIN out already, and with the mini-fit jr to mini-din adapter, would it work if i just plug it in? No it will not work the PicoPSU needs 12V n...

The Atom board is for sale now on SPCR for 89$ see Link SOLD

-----SOLD----- I have a board for sale is almost new I just used for couple of hours to test the power consumption and for me is to much from 13.8W to 17W max. I needed a lower power consumption the performance was not important for me so I purchased this Link . I sell this for only 89$ US or CAD b...

Finally got my system up an running using the package I bought a while ago (DC/DC + Gateway Adapter). Is 100W @ load (60W @ idle) too much to run this thing fanless? The PCB gets "hot" - not intolerably so, but enough that I think I should add a slow 80mm fan infront of it. The system it's powering...

Nice. I had a chance to grab 3 of the wyse WinCE models with the AMD Geode processors for free but passed on them. Sounded like too much of a hassle and I have enough stuff around the house I don't use :P Glad someone could put one of these type of things to use. Yes this thin clients are computers...