Search found 426 matches
- Sun Jul 16, 2006 1:14 pm
- Forum: Silent Storage
- Topic: Seagate 7200.10 Series
- Replies: 80
- Views: 51018
I wish that guy would have run some sort of seek test like HD Tach to see if there was a difference between the Singapore and China manufactured drives. I doubt there'll be any significant differences. Go to page 5 and you'll see the PATA "quiet seek" of ~15ms. Thats about 1.7-1.9ms slower than the...
- Sun Jul 16, 2006 11:40 am
- Forum: Silent Storage
- Topic: Seagate 7200.10 Series
- Replies: 80
- Views: 51018
- Fri Jul 14, 2006 3:51 am
- Forum: CPUs and Motherboards
- Topic: Asus or MSI Geforce 6150 Based Motherboard?
- Replies: 18
- Views: 9451
Wow, the Jetway M2GT3-PTD / 939GT3-PTD / 754GT3-PTD has a pretty impressive bios. Bios fan control for all 3 headers (down to 60% it seems). yeha, what're the options for CPU Vcore under Power User Overclock Settings ? And does it have any offset when using Cool n Quiet? Also, what's the Realtek 8-c...
- Thu Jul 13, 2006 2:58 am
- Forum: Fans and Control
- Topic: The new Evercool quiet, low RPM fans
- Replies: 5
- Views: 3714
- Mon Jul 10, 2006 4:04 am
- Forum: SPCR Article Discussion
- Topic: Puget Delivers a Quiet Core Duo PC
- Replies: 15
- Views: 13601
- Sun Jul 09, 2006 7:29 am
- Forum: Silent Storage
- Topic: Seagate 7200.10 Series
- Replies: 80
- Views: 51018
Got a HDTach screenie for your Maxtor ( 6V300F0 ?)?Slidax wrote:just got my 300gb sata2 16mb maxtor today, nice and quiet by comparison, also hdtach benches roughly the same on the avg read
Anyone knows the platter density of 6V320F0 ?
DiamondMax 10 Datasheet
- Fri Jul 07, 2006 9:40 pm
- Forum: CPUs and Motherboards
- Topic: hr-05 on k8ngm2-fid?
- Replies: 20
- Views: 11325
I doubt it'll fit without problems. The HR-05-SLI seems possible, but probably at an odd angle. The MSI K8NGM2-FID 's allowable L x W dimension for the NB HS is just too small. Edit: The HR-05-SLI may not fit too, if it uses the same mounting mechanism as the HR-05. This is because the K8NGM2-FID 's...
- Thu Jul 06, 2006 8:26 am
- Forum: Silent Storage
- Topic: Samsung Spinpoint T - 300 & 400 GB
- Replies: 74
- Views: 76643
alfred, those access times are rather slow for AAM disabled drives, you should be getting ~14.X instead. I suggest you check your setup/benches (nVidia IDE/Sata drivers at work?) again. :) and if you do enable AAM, mind finding out the access times for both drives? Oh, and it appears your SP2514N is...
- Wed Jul 05, 2006 9:07 am
- Forum: CPU Cooling
- Topic: Thermalright SI-128
- Replies: 6
- Views: 3871
- Wed Jul 05, 2006 8:58 am
- Forum: CPU Cooling
- Topic: [CeBIT] Thermalright HR-05, Ultra-90 & Ultra-120
- Replies: 21
- Views: 8664
Ultra-90A
3 less aluminum fins
L45 x W102 x H140
423g
If it orientates the right direction on typical K8 boards I'd grab 1.
3 less aluminum fins
L45 x W102 x H140
423g
If it orientates the right direction on typical K8 boards I'd grab 1.
- Tue Jun 27, 2006 8:05 pm
- Forum: SPCR Article Discussion
- Topic: Seasonic S12-330 Rev A3 (w/Sleeving) Review
- Replies: 56
- Views: 54840
- Sun Jun 25, 2006 10:15 pm
- Forum: Cases and Damping
- Topic: Yet another uATX (or m-ATX) case thread - a non HTPC list
- Replies: 27
- Views: 16755
- Fri Jun 23, 2006 12:57 am
- Forum: CPUs and Motherboards
- Topic: I’m looking for feedback on NVidia 6150 based motherboards
- Replies: 41
- Views: 27600
Any idea whether a Zalman ZM-NBF47 can be fitted onto the MSI K8NGM2-FID ? If it fits, does it have to be mounted at an odd angle?
Anyway, a comparison between Thermalright HR-05 , Zalman ZM-NBF47 and ZM-NB47J here.
Anyway, a comparison between Thermalright HR-05 , Zalman ZM-NBF47 and ZM-NB47J here.
- Thu Jun 22, 2006 9:45 am
- Forum: Cases and Damping
- Topic: Yet another uATX (or m-ATX) case thread - a non HTPC list
- Replies: 27
- Views: 16755
Re: Yet another uATX (or m-ATX) case thread - a non HTPC lis
Guys I need a definite answer as to whether the Ninja will fit in the CM RC-540 / RC-541 without problems. Can owners help check it out. I want to go ahead with my purchase without any regrets.Weldingheart wrote:not sure if fanless Ninja might fit
Thank you all so much.
- Tue Jun 20, 2006 7:23 pm
- Forum: Silent Storage
- Topic: Scythe Quiet Drive enclosure, it´s good :)
- Replies: 94
- Views: 107739
- Sat Jun 17, 2006 7:57 pm
- Forum: SPCR Article Discussion
- Topic: Western Digital Caviar SE16 500GB: Big Low Noise Champ?
- Replies: 107
- Views: 120175
- Fri Jun 16, 2006 9:14 am
- Forum: CPU Cooling
- Topic: Scythe makes new Ninja to fit AM2 processors!
- Replies: 17
- Views: 10758
- Fri Jun 16, 2006 8:55 am
- Forum: CPUs and Motherboards
- Topic: Passive HS for NF4 mobo that does not block pci-e slot?
- Replies: 7
- Views: 3530
How about Thermalright HR-05-SLI ?
- Thu Jun 15, 2006 9:15 pm
- Forum: Cases and Damping
- Topic: Any info on Silverstone TJ08?
- Replies: 17
- Views: 12306
ProClockers @@ Review -> Silverstone TJ08 mATX Case PC Perspective - Silverstone Temjin TJ08 Micro-ATX Tower Case Review Overclockers Online - SilverStone TJ08 . Virtual-Hideout.Net | Silverstone TJ-08 Micro-ATX Chassis Review Techgage - Review: SilverStone TJ08 MADSHRIMPS - Silverstone TJ08 Mini-I...
- Thu Jun 15, 2006 7:57 pm
- Forum: CPUs and Motherboards
- Topic: AMD A64 TDP Poll
- Replies: 71
- Views: 84299
- Thu Jun 15, 2006 7:51 pm
- Forum: General Gallery
- Topic: Silverstone TJ-08 Build and Review
- Replies: 24
- Views: 27631
- Thu Jun 15, 2006 4:10 am
- Forum: CPUs and Motherboards
- Topic: I’m looking for feedback on NVidia 6150 based motherboards
- Replies: 41
- Views: 27600
6150LE
Perfect. But how many boards will actually use that, with DVI and HD Audio? By the time motherboards with 6150LE actually surface, 6150 boards would already have gained a strong footing in the mainstream market.
Perfect. But how many boards will actually use that, with DVI and HD Audio? By the time motherboards with 6150LE actually surface, 6150 boards would already have gained a strong footing in the mainstream market.
- Wed Jun 14, 2006 9:28 am
- Forum: System Advice / Troubleshooting
- Topic: Best processor for value/performance/coolability?
- Replies: 43
- Views: 14897
- Wed Jun 14, 2006 3:12 am
- Forum: General Gallery
- Topic: Silverstone TJ-08 Build and Review
- Replies: 24
- Views: 27631
Nice build. Thanks for posting pics. Anyone know if the new Asus M2NPV-VM with a Ninja will fit in one of these babies? Is the CPU socket in more or less the same spot? Why wouldn't it fit? It is more or less in the same spot. :) The Asus M2NPV-VM looks good on paper. The northbridge HS uses hooks ...
- Mon Jun 12, 2006 5:35 am
- Forum: CPUs and Motherboards
- Topic: I’m looking for feedback on NVidia 6150 based motherboards
- Replies: 41
- Views: 27600
- Sun Jun 11, 2006 8:34 am
- Forum: CPUs and Motherboards
- Topic: I’m looking for feedback on NVidia 6150 based motherboards
- Replies: 41
- Views: 27600
- Sun Jun 11, 2006 8:29 am
- Forum: CPUs and Motherboards
- Topic: AMD A64 TDP Poll
- Replies: 71
- Views: 84299
- Sat Jun 10, 2006 12:24 am
- Forum: Silent Storage
- Topic: Hitachi's T7K500 and 7K160 with 160gb platters
- Replies: 25
- Views: 23429
- Fri Jun 09, 2006 8:23 pm
- Forum: Silent Storage
- Topic: Hitachi's T7K500 and 7K160 with 160gb platters
- Replies: 25
- Views: 23429
- Fri Jun 09, 2006 6:13 pm
- Forum: Silent Storage
- Topic: Hitachi's T7K500 and 7K160 with 160gb platters
- Replies: 25
- Views: 23429