Hello,
My name is Jod and here's some fun pics of the adventure.
All 3 Tricools are on Med, but the Zalman's on high cause I'm testing oc.
Fun, fun, but as you can see, it's still running hot. So I took it out on the CPU and HSF.
But not even a nice mating can take care of the roasting inferno inside. No, I fear I need to move onto Mr. Stacker 810 and shove 4 Scythe SFLEX's in there. Maybe the Ninja w/ another Scythe. Tho it's not a total loss, as I did manage a bit of this before they took down the master server.
Mechs!! OMG!
2nd stuffing of the P180B - C2D/19XT
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
2nd stuffing of the P180B - C2D/19XT
Last edited by Jodiuh on Tue Aug 29, 2006 3:09 pm, edited 1 time in total.
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
Thanks guys!
I started with 400, then 800, 1500, and finally 2000 grit 3M wet/dry from Wal-Mart. Did it all dry thist time. Much faster. Temps have decreased 2C idle and 5C load. It would be more, but I used the dot method of TIM application. I'll be doing the smooth method with a baggy and use AS5 instead of Ceramique tonight. As for the NB fan...ha! What a joke. That thing gets so hot, it shoots fireballs at me. I'll be putting the whole thing in a black 810 w/ a Jing Ting NB cooler soon.
I started with 400, then 800, 1500, and finally 2000 grit 3M wet/dry from Wal-Mart. Did it all dry thist time. Much faster. Temps have decreased 2C idle and 5C load. It would be more, but I used the dot method of TIM application. I'll be doing the smooth method with a baggy and use AS5 instead of Ceramique tonight. As for the NB fan...ha! What a joke. That thing gets so hot, it shoots fireballs at me. I'll be putting the whole thing in a black 810 w/ a Jing Ting NB cooler soon.