Hello to all !
This is my first time posting here although i was surfing this forum quite a long.Thanks to your ideas i could build this rig and i am happy with it, but there is place for better.It's very silent,only the rear fan at 550 rpm is now a problem because it started to make a nasty sound.My psu has the fan swapped with a tricool120 fan and it's running on low speed. The northbridge is cooled by the Scythe 100 mm model at 700 rpm which is very silent and it cools the hr-03 heatsink on my vga. With 20* celcius in my room the cpu is 38* celcius(33\34) on both cores, northbridge is42*, gpu is 42* and the hdd's are 38\41 in SQD-1000 box.
Sorry in advance if my english is bad !
[]
[]
[][/img]
My P182 rig with only two fans large pictures 56K beware !!!
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 46
- Joined: Tue Oct 10, 2006 5:26 pm
- Location: Canada
nice build,
pictures are upside down and sideway though but i get the idea.
that 100mm on the northbridge looks like its taking over!
were u unable to fit the true paralell to the fan?
|| --> ||
true fan
as it is currently
= --> ||
true fan
i think the temps are suppose 2 be better when its paralell.
what voltage did u need on the 4300 to hit 3150
pictures are upside down and sideway though but i get the idea.
that 100mm on the northbridge looks like its taking over!
were u unable to fit the true paralell to the fan?
|| --> ||
true fan
as it is currently
= --> ||
true fan
i think the temps are suppose 2 be better when its paralell.
what voltage did u need on the 4300 to hit 3150
Thank you very much. I'm sorry for the pictures cuz' i posted them in a rush and didn't had time to deal with them. I was able to fit it paralell but I let the TRUE like that because the rear fan uses the upper hole of the case creating an air curent and cools it better and also it's far from the vga avoiding hot air which is exhausted by the rear fan. The voltage needed is 1.42 in bios and it shows in windows 1.4. Anyway i hope i'll change it soon with a better one, maybe an E8500 and a better board with better cable management.