Not because the silencing effect but because the feel the mouse gets
![Smile :)](./images/smilies/icon_smile.gif)
The whole thing is VERY easy and takes about 5 minutes, tops
![Smile :)](./images/smilies/icon_smile.gif)
The basics is open the mouse, remove the pin on the scroll wheel and close her up again. DONE.
What you get is a SMOOTH scroll wheel without the stops and the loud sound those stops do.
Some people thinks it feels weird in the beginning (and maybe it does if you not use to it) but after a while you grow to really appreciate the smoothness.
And heres the Picture guide! :
Get your mouse! (I have only done this on Logitech mouses but my guess is that all scrolls are the same)
![Image](http://climbing.huligan.se/rackafella/IMG_6973.jpg)
Remove the hood, the batteries and the screws (some mouses you work from the top, like this one. And some from the back.)
![Image](http://climbing.huligan.se/rackafella/IMG_6974.jpg)
Separate the top from the back. (usually a cable in there you have to unplug if its a wireless mouse).
![Image](http://climbing.huligan.se/rackafella/IMG_6975.jpg)
This is what a naked mouse looks like:
![Image](http://climbing.huligan.se/rackafella/IMG_6977.jpg)
Remove the scroll wheel. Usually just lift it straight up.
![Image](http://climbing.huligan.se/rackafella/IMG_6978.jpg)
The wheel usually has two metal pins. One on the right side and one on the left. Witch to remove tends to differ from model to model.
But it is the one that goes IN to the wheel that should be removed. The other one is used as a spring so that the wheel will also work as a button.
![Image](http://climbing.huligan.se/rackafella/IMG_6979-86.jpg)
Then put the scroll wheel back in the mouse as i where before (without the removed pin).
![Image](http://climbing.huligan.se/rackafella/IMG_6988.jpg)
See to it that the other pin is seated correctly, otherwise your scroll wheel will not as it should. (just open up and replace it if it doesn't).
![Image](http://climbing.huligan.se/rackafella/IMG_6992.jpg)
Plug the cable back in and put the top back on. Screw in the screws.
![Image](http://climbing.huligan.se/rackafella/IMG_6994.jpg)
And finally put in batteries and the hood again. And you're done!
And if you use Firefox i recommend "Yet another smooth scrolling Add-on"
https://addons.mozilla.org/en-US/firefox/addon/5846
Thank you for listening