old P180 with new parts

Show off your quiet rig.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
iakovl
Posts: 139
Joined: Wed Mar 09, 2005 6:49 am
Location: israel
Contact:

old P180 with new parts

Post by iakovl » Mon Jan 26, 2009 5:00 am

it's been several years since i last build a rig and this is what i bought this time:
CPU - E8400
Mobo - Asus P5q pro
Mem - G.Skill 4GB DDR2900 PI Black
GPU - club3d 4850 oc edition
HDD - WD5000AAKS*2 + WD3200AAKS
PSU - VX450W
Case - Antec P180

the hdd and rear fan are Yate Loon 120mm, the front fan is Scythe Slip Stream that came with the HSF.

i removed the rear grill and closed with tape most of the holes
ImageImageImage

the rig will be updated in two days with a perc 5/i controller and 4 samsung F1 tera drives

i'm also working on an 6A19 so i can move the rig into it, will be havyly moded and silenced with sonex foam and other stuff

deadfones
Posts: 18
Joined: Thu Mar 29, 2007 2:04 pm
Location: Near Portland, OR

Post by deadfones » Tue Feb 03, 2009 3:17 pm

Did you do before and after temp readings when you isolated the airflow?

Post Reply