CM Storm Sniper Black rig

oxygen200000 · Post by **oxygen200000** » Wed Jun 23, 2010 2:15 am

I recently made a rig in a CM Storm Sniper case. Super case. Spacious, elegant and above all, excellent for WM, thanks to the smart holes in the tray, the space next to the tray and to the huge space between the tray and the side panel where you can perfect arrange the cables to be hidden.

CPU:
AMD Phenom II X6 1055T

Motherboard:
Asus Crosshair IV Formula

Memory:
Kingston 4 GB DDR3 CL9 Dual Channel Kit HyperX

HDD:
Western Digital 1TB SATA-III 7200 rpm 64MB Caviar Black

Graphics card(s):
Sapphire Radeon HD5870 Vapor-X 1GB

Sound card:
Creative X-Fi FATAL1TY

Optical drive(s):
LG GH22NS50

Power Supply:
Seasonic X-750

CPU Cooler:
Noctua D14

Fans:
stock 200mm

Case:
CM Storm Sniper

With lights off looks sober and elegant

... from anywhere you looking.

If you choose to leave them on then you have some bling bling.

Buttons, switches, plugs and jacks are located very conveniently at hand.

Looks great under the desk

From the front...

...and from the side

oxygen200000 · Post by **oxygen200000** » Wed Jun 23, 2010 2:18 am

Inside it looks just as promising. Was a true champion of the facilities and WM.

As i've already said, very spacious

...so, even the true beasts like Noctua NH-D14 don't seems to be anymore so frightening.

I agree that a very long AD_EXT ribbon cable would have helped me a lot but ... that's it... F@#$k Creative...

It would have been nice to have more black straps, but not ... I was almost pleased with some white, scattered

Even with a modular PSU, on the back are a bunch of cables but ...

... all are obedient to their place,

being very afraid to show themselves up

The End ... with the panel that closed without even the slightest hint of opposition...

gcwebbyuk · Post by **gcwebbyuk** » Sat Jun 26, 2010 6:40 pm

Smart build - how is the new AMD chip?

Is the build quiet? AM guessing a noisy'ish due to the stock case fans and GPU cooler.

Nice work with the cabling too

danimal · Post by **danimal** » Sun Jun 27, 2010 11:29 am

that looks like a clean and functional build!

pope_face · Post by **pope_face** » Thu Jul 01, 2010 11:55 am

Wow, that's a great looking build... I'm seriously tempted to abandon my build and switch over to a similar case, although the cost of a new case is making me rethink that. I'm curious too, how's the sound on it? And as for sharp edges on fan openings: I had the same thing, and until I took my case apart to file down the nubs, I just put electrical tape on them. It doesn't look as nice, but it prevents cuts, won't interfere with the fan, and is easy to work with.

BlackWhizz · Post by **BlackWhizz** » Fri Jul 02, 2010 1:23 am

Still looking at this build. It looks great. But i was wondering why you still have that CM fan in use (the 120 at the back). Because those fans arent that quiet even at low voltages. You probably can turn that D14 so that the airflow goes up and let the 200mm do the exhausting.

oxygen200000 · Post by **oxygen200000** » Tue Jul 06, 2010 10:35 pm

Is pretty quiet when fans are controlled. This steel sheet is very thick and greatly reduce the vibration.

coolhand · Post by **coolhand** » Fri Jul 09, 2010 8:29 am

Nice Clean Build

I would definately swap out the stock fans as soon as you can.
good advice here suggesting turning the CPU Heatsink to let natrual convection take place (heat rises)

one question whats that uh ribbon type cable doing in your build, i mean you have so many "New" parts the IDE just doesnt belong, i thought the floppy died, please tell me its not for a HDD..

nice clean build though i like it.

RoGuE · Post by **RoGuE** » Fri Jul 09, 2010 9:36 am

coolhand wrote:one question whats that uh ribbon type cable doing in your build, i mean you have so many "New" parts the IDE just doesnt belong, i thought the floppy died, please tell me its not for a HDD..

Don't worry..it's not. It links his Creative Labs sound card to the front I/O ports you can see in the first few pictures.

Apparently creative doesn't offer a longer, non-ribbon version of the cable?

bonestonne · Post by **bonestonne** » Fri Jul 09, 2010 10:01 am

it's more than 40 pins unless I'm mistaken. There are a few lying around here where I work, but I've never really looked at them too closely, I just know when you have the external box, it's a DB44 cable to connect them.

oxygen200000 · Post by **oxygen200000** » Fri Jul 09, 2010 10:48 am

RoGuE wrote:
coolhand wrote:one question whats that uh ribbon type cable doing in your build, i mean you have so many "New" parts the IDE just doesnt belong, i thought the floppy died, please tell me its not for a HDD..
Don't worry..it's not. It links his Creative Labs sound card to the front I/O ports you can see in the first few pictures.

Apparently creative doesn't offer a longer, non-ribbon version of the cable?

Yes... is Creative indeed... A realy pain in the ass...
No matter if they were ribbon or not but if they were longer could be folded and more easy to hide.

CM Storm Sniper Black rig

CM Storm Sniper Black rig

INTERIOR