Best avalible dampning stuff in Scandinavia/UK/GE?

Schroinx · Post by **Schroinx** » Mon Feb 16, 2004 8:40 pm

Yes, what is the best? And where do I get it? Need something for my new aluminium case. This has proberly been asked before but many of the things mentioned is not easy to come by here.

MrMajestic · Post by **MrMajestic** » Tue Feb 17, 2004 12:00 am

Schroinx wrote:Yes, what is the best? And where do I get it? Need something for my new aluminium case. This has proberly been asked before but many of the things mentioned is not easy to come by here.

I would go for Acoustipack Deluxe which is quite widely available here in Sweden. If you're in Sweden I can give you a list of stores that sell it.

Schroinx · Post by **Schroinx** » Tue Feb 17, 2004 3:18 am

If I could get you to name a few that that would be nice. I just need them to ship it to Denmark.

Kemokim · Post by **Kemokim** » Tue Feb 17, 2004 3:22 am

BS-multimedia Sells the acoustipack in Denmark
i know cause i aksed them!

they are as far as iwe seen the only store that sells any of their products, but they are able to order everything..

The antec precut kit they want 460kr. i would guess they want about the same for the deluxe kit..

btw what case do you have?

MrMajestic · Post by **MrMajestic** » Tue Feb 17, 2004 5:48 am

Schroinx wrote:If I could get you to name a few that that would be nice. I just need them to ship it to Denmark.

Actually I found a Swedish shop that also has a Danish page:
http://www.databutikken.com/dk/
Otherwise these are a few Swedish:
http://www.kylning.com
http://www.nyhamndata.se
http://www.mycom.se
http://www.overclockers.se

Kemokim · Post by **Kemokim** » Tue Feb 17, 2004 8:28 am

DAMN!! they sell the AcoustiCase 6607B for 1000.- with free shipping!!

i really wanted that, but i went with the Antec SLK3700BQE which i just got TODAY!! but i opened the case and installed all the components, so now im not sure i can return it!

damn damn damn damn!! now i have to wait 8 weeks and pay even more to get the acoustipack pre cut for this model!!!

the acousticase would have been alot cheaper, easier and better!!!

MrMajestic · Post by **MrMajestic** » Tue Feb 17, 2004 9:59 am

Kemokim wrote:DAMN!! they sell the AcoustiCase 6607B for 1000.- with free shipping!!

i really wanted that, but i went with the Antec SLK3700BQE which i just got TODAY!! but i opened the case and installed all the components, so now im not sure i can return it!

damn damn damn damn!! now i have to wait 8 weeks and pay even more to get the acoustipack pre cut for this model!!!

the acousticase would have been alot cheaper, easier and better!!!

Ahh, too bad. But on the other hand, Acoustipack isnt that hard to cut yourself.

Kemokim · Post by **Kemokim** » Tue Feb 17, 2004 10:39 am

Hmm perhaps i should go read the review of the deluxe kit again, and just buy that and cut it myself..

i really dont wanna wait 8 weeks for them to put out a pre cut kit for the 3700BQE..

MrMajestic · Post by **MrMajestic** » Tue Feb 17, 2004 11:58 am

Kemokim wrote:Hmm perhaps i should go read the review of the deluxe kit again, and just buy that and cut it myself..

i really dont wanna wait 8 weeks for them to put out a pre cut kit for the 3700BQE..

I did my SLK3700AMB in an 1 hour or so. Its not hard at all.

Schroinx · Post by **Schroinx** » Tue Feb 17, 2004 4:24 pm

Well, thx for info. Have ordered some and then we'll see. The databutikken seems very expensive compared to Danish shops on fans and stuff. Just ordered some papst 40mm fans for my IC3Max3 for like 100 DKK and there they cost 160 DKK.

My case is a Coolermaster 210. They are pretty cheap right now compared to that it is an aluminium case. However I have to modify the frontplate so I can mount a 120mm fan bc the airflow is very poor. No intake in the front, but one 80mm exhaust in the back and in the top and a 120mm in my Chill Innova 350w v2 PSU. Right now I have one cut out of cardboard with two Panaflo FBK-12G12LH 120mm fans. It does not look too good thou. Have to find some aluminium mesh so I can get the frontplate done. The Chill PSU is VERY quiet even compared with my old Noisecontrol 350w and moves a decent amount of air. See it here: http://www.chill-innovation.com/images/ ... nglish.pdf Available in Dk only. Unfortunately it does not have sleeved cables. Another project for the long winther nights.

Schroinx · Post by **Schroinx** » Wed Feb 18, 2004 4:12 am

Oh, just did some reading up on the PSU. Seems as it is not recomendable due to low quality. I had the impression it was based on a Fortron PSU but I guess I was wrong. I have had problems with fluctuations in core voltage and I do not believe that it have anything to do with my mobo, so there is only one thing left, the PSU. That sucks since I can no longer return it. Anyone who have any idea about how I can fry this thing and getting it sent back under warranty?

Best avalible dampning stuff in Scandinavia/UK/GE?

Best avalible dampning stuff in Scandinavia/UK/GE?

Re: Best avalible dampning stuff in Scandinavia/UK/GE?