slk300b anyone got some decent pics of the disk "clamp
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
slk300b anyone got some decent pics of the disk "clamp
Hi,
what i'm referring to are the slides that i understand are required so that drives can be screwed onto the top level drive bays.
had a look yesterday and couldnt figure them out for love nor money .
thx for any help.
mark..........
what i'm referring to are the slides that i understand are required so that drives can be screwed onto the top level drive bays.
had a look yesterday and couldnt figure them out for love nor money .
thx for any help.
mark..........
Sorry if I have confused you further !
The rails DO go on the side of the drive - one each side.
Just line the rail up against the BOTTOM edge of the drive and screw in the holes that line up - that way the drive will slide on the rails in the guides nicely.
I spent many hours screwing and unscrewing the rails to get the correct holes !! Just make sure the rail is attached at the side of the drive so that it comes level with the base of the drive.
The rails DO go on the side of the drive - one each side.
Just line the rail up against the BOTTOM edge of the drive and screw in the holes that line up - that way the drive will slide on the rails in the guides nicely.
I spent many hours screwing and unscrewing the rails to get the correct holes !! Just make sure the rail is attached at the side of the drive so that it comes level with the base of the drive.
sorry bout this im either being very slow, very stoopid or both.
The brackets i have dont really have "springs" as such, there is a bit of what seems like aluminium on one end but the other is flatish.
do i screw the brackets onto the drive cage first then slot the drive into it ?
I know its a lot to ask but any chance of any pics ??
thx for ya time so far
mark..........
Screw the rails to the drive.
Slide the rails/drive into the cage (be sure that the front bezel is removed).
You should hear a 'click' as the rails lock the drive in place.
If you need to remove the drive you press on the metals tabs to release the drive (ie these are the springs that woody described)
One day we'll get these instructions right so there's less confusion.
AntecRep
Slide the rails/drive into the cage (be sure that the front bezel is removed).
You should hear a 'click' as the rails lock the drive in place.
If you need to remove the drive you press on the metals tabs to release the drive (ie these are the springs that woody described)
One day we'll get these instructions right so there's less confusion.
AntecRep
http://james.westcoastbmx.com/000_1187.JPG
http://james.westcoastbmx.com/000_1188.JPG
Let me know if you need more
Moderator Edit: Even though it was a request for pictures, at these size, they should be linked.
http://james.westcoastbmx.com/000_1188.JPG
Let me know if you need more
Moderator Edit: Even though it was a request for pictures, at these size, they should be linked.
Finally got hold of some beer
And got the dvd drive loaded into the case.
I do it was one hell of a job, and if it hadnt been for the beer i'd have been scared stiff i might have snapped something.
there MUST be something i'm doing wrong , how do u get the clip to slot into place with the last 40/50 mm of movement i had to push the case against the wall then screwdrivers either side to push the "locks" back so they would go in.
mark........
And got the dvd drive loaded into the case.
I do it was one hell of a job, and if it hadnt been for the beer i'd have been scared stiff i might have snapped something.
there MUST be something i'm doing wrong , how do u get the clip to slot into place with the last 40/50 mm of movement i had to push the case against the wall then screwdrivers either side to push the "locks" back so they would go in.
mark........
-
- Posts: 6
- Joined: Fri Jul 08, 2005 1:57 pm
Are you sure you've removed the front panel?pitch wrote:Finally got hold of some beer
And got the dvd drive loaded into the case.
I do it was one hell of a job, and if it hadnt been for the beer i'd have been scared stiff i might have snapped something.
there MUST be something i'm doing wrong , how do u get the clip to slot into place with the last 40/50 mm of movement i had to push the case against the wall then screwdrivers either side to push the "locks" back so they would go in.