Page 1 of 1
acoustic foam, need to know some things
Posted: Sun Aug 28, 2005 11:00 am
by iakovl
i got a 6A19, after a nice search in town i found a place that sells acoustic foam
i need to know the follow:
what do i need to search in acoustic foam?
how deep shoud the foam be?
any tips or help
thx
Posted: Tue Aug 30, 2005 12:04 am
by Mr_Smartepants
check out my install photos
here.
I really like the 6A19 compucase. Loads of room to work in. My only complaint is the funky plastic fan holders w/non-standard mounting holes. You can see how I had to offset drill new holes on the rear of the case for the fan grill.
Posted: Tue Aug 30, 2005 6:16 am
by iakovl
i used zip's with ear plugs
nice and easy vib killer
how thick is the door foam?
Posted: Tue Aug 30, 2005 6:58 pm
by BrianE
I think most real acoustic foam sold for sound rooms etc. would be too big to fit in a computer case other than maybe on the main side door. It tends to be kind of thick.
Try to fit it as thick as you can of course.
Posted: Tue Aug 30, 2005 10:28 pm
by iakovl
i can get 5cm!!! but that is too much
i need to know how much to put in
Posted: Tue Aug 30, 2005 11:11 pm
by cotdt
you can put a layer both inside and outside of your computer. the thicker the better.
Posted: Tue Aug 30, 2005 11:21 pm
by iakovl
cotdt wrote:you can put a layer both inside and outside of your computer. the thicker the better.
no way
inside only
Posted: Fri Sep 30, 2005 12:30 am
by ronrem
Foam or similar stuff ideally damps echo,the tendency of a sound to bounce until it escapes. It also can damp-mute resonences in the metal of a case,but foam lacks the density to stop some sounds passing through. An ideal thing would be a metal-foam-metal (or wood) sandwich with an additional rough textured liner-which could be a heavy fabric,carpeting,or a ribbed or textured dense foam. You then kill internal echoes and the 2 high density layers,metal or would give a barrier. You'd want a clever indirect path intake,probably under the case.
Obviously tis approach adds several inches to the overal dimensions. An existing case could provide the basic form,the inner metal wall.