Page 1 of 1
P150 front door
Posted: Thu Mar 23, 2006 11:36 pm
by HiFi
does anyone else have trouble getting the USB ports to lineup with the holes in the front door of the P150?
Posted: Fri Mar 24, 2006 7:33 am
by Goldmember
I haven't heard of that problem before. Maybe somebody who actually has this case (I don't) will be nice enough to help you.
Take care.
Re: P150 front door
Posted: Sun Mar 26, 2006 3:27 am
by notareal
HiFi wrote:does anyone else have trouble getting the USB ports to lineup with the holes in the front door of the P150?
No problems with USB ports,
Posted: Sun Mar 26, 2006 4:51 am
by florinp3
No problem here either. Check if the hinges go where they should.
Posted: Sun Mar 26, 2006 6:35 pm
by NeilBlanchard
uuumm... does the P150 even have a door?
Posted: Sun Mar 26, 2006 11:36 pm
by hravn
Well, no, but the entire front swings up when you want to access fan filters / hard drives. But I don't have any problems with the USB ports not lining up.
Posted: Mon Mar 27, 2006 1:21 am
by HiFi
i realized what i was doing.. i was just swinging it closed at the top. what you really have to do is push the bottom side so it pops in.
Posted: Mon Mar 27, 2006 11:42 pm
by jimmyzaas
My door fits perfectly fine.
My problem is that my 3 week old P150's Power LED died!
Everything is connected, nothing was changed. It just died all of a sudden. Antec said they are sending me a replacement. I don't even know how to install it.. omg..
Posted: Tue Mar 28, 2006 10:13 am
by NeilBlanchard
Hello Jimmy,
A little bit o' glue should do it! Did you check the polarity? Or, maybe one of the pin sockets is loose?
Posted: Tue Mar 28, 2006 12:26 pm
by KnightRT
The fit is fine, but it's a pain to get both the top and bottom metal door prongs into the case slots. If you don't have both, the door won't close correctly.
DI
Posted: Thu Mar 30, 2006 4:59 pm
by jimmyzaas
NeilBlanchard wrote:Hello Jimmy,
A little bit o' glue should do it! Did you check the polarity? Or, maybe one of the pin sockets is loose?
yo,
I'm certain the polarity is right. Actually it is really odd lately! I thought the LED was permanently busted, but it came back on last night! and for what ever reason, it is off again.
This is really weird. I don't know if the led is busted or the mobo pin is busted. I know LEDs are very reliable.. so it would really weird for it to fail at such a early date. Antec is sending me a replacement, if it also does the same thing it is probably the mobo pin is busted.
edit: very sorry for hijacking the thread
Posted: Thu Mar 30, 2006 10:33 pm
by hravn
Try to connect it to something else, like the IDE pins on the motherboard.. if it's still flaky, then you know what the problem is...
Posted: Tue Apr 04, 2006 1:35 pm
by HiFi
are you saying the HDD LED is supposed to be plugged into the back of the HDD if its SATA...and not the Mobo pins?
Posted: Tue Apr 04, 2006 10:41 pm
by hravn
No, just that he should try with some other pins than the IDE/HD pins on the motherboard.