[Computex 07] Antec cases & PSUs

Enclosures and acoustic damping to help quiet them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar

Post Reply
rpsgc
Friend of SPCR
Posts: 1630
Joined: Tue Oct 05, 2004 1:59 am
Location: Portugal

[Computex 07] Antec cases & PSUs

Post by rpsgc » Tue Jun 05, 2007 1:20 pm

[Computex 07] Antec cases & PSUs


* Antec New Overture

This is a home theater PC case with "flipped" layout similar to that of Antec's P180 and its brethren. The New Overture is capable of accommodating a full ATX motherboard, and it comes with two 120mm TriCool fans, the speeds of which can be adjusted from the back of the case.
Image


* Antec Twelve Hundred (1200)

Also on display was the upcoming Antec Twelve Hundred. This case will come out in two models: one with support for water cooling, and one without. Both will come equipped with 12 5.25" bays capable of accommodating hard drives, a 200mm top fan (and an optional 200mm fan port on the side of the case), and an interchangeable rubber mat at the top—a finishing touch for users who like to leave gadgets or loose change on top of their PC.
Image

For more pics click here.


* Antec Mini-P180 (!!)

One particularly interesting specimen was the Mini P180. This model is a shrunk version of Antec's P182. It only takes Micro-ATX motherboards, and it has fewer 5.25" drive bays than the P182. Nonetheless, the Mini sports a 200mm top-mounted fan—bigger than the 120mm model on the P182.
Wow... a mini P180, how cute! :D

For more pics click here

Image

Image


* Antec TruePower Quatro 850 & 1000W PSUs


Racing stripes eh?

Image



Source
Last edited by rpsgc on Thu Jun 07, 2007 11:51 pm, edited 2 times in total.
Fractal Define R4 | Corsair AX750 | MSI Z97 Gaming 5 | Intel Core i7 4770K w/TRUE 120 Rev. C | 16GB G.Skill Sniper DDR3-1866 | Sapphire Nitro+ RX 480 8GB OC | Crucial m4 128GB + Crucial MX100 512GB + WD Blue 1TB + WD Red 4TB | JVC HA-RX900 | Dell U2312HM + BenQ G2400WD | Asus Echelon Mechanical Keyboard | Logitech G400s

thejamppa
Posts: 3142
Joined: Mon Feb 26, 2007 9:20 am
Location: Missing in Finnish wilderness, howling to moon with wolf brethren and walking with brother bears
Contact:

Post by thejamppa » Tue Jun 05, 2007 1:36 pm

That Mini P180 looks rather lovely. Combine that with Mini Ninja ^^... I wonder what its price will be?
If seeing is believing, how can blind person believe in anything?
Maturity is just not experience in life but also ability to make compromises.

regal196
Posts: 119
Joined: Sat Oct 28, 2006 9:01 pm
Location: California
Contact:

Post by regal196 » Tue Jun 05, 2007 3:57 pm

I really like the 1200... might have to buy one.
3800 X2 w/Ninja, MSI K9A Plat., 3gb ram (for the time being), X1900GT w/HR-03, Seasonic S12 Energy Plus 550, 160gb HD Seagate, U4 Rack mountable case. See the wood case here: http://www.silentpcreview.com/forums/viewtopic.php?p=319233#319233

crispyfish
Posts: 222
Joined: Tue Nov 21, 2006 10:53 am

Post by crispyfish » Tue Jun 05, 2007 9:27 pm

The absence of the Micro Fusion is very disappointing... but the new Overture looks interesting. Any word on release dates?

rpsgc
Friend of SPCR
Posts: 1630
Joined: Tue Oct 05, 2004 1:59 am
Location: Portugal

Post by rpsgc » Wed Jun 06, 2007 8:58 am

"The Mini P180 and Twelve Hundred are both due in time for the back-to-school season."

No word on the New Overture though.


More pics of the Twelve Hundred, courtesy of Matbe.
Fractal Define R4 | Corsair AX750 | MSI Z97 Gaming 5 | Intel Core i7 4770K w/TRUE 120 Rev. C | 16GB G.Skill Sniper DDR3-1866 | Sapphire Nitro+ RX 480 8GB OC | Crucial m4 128GB + Crucial MX100 512GB + WD Blue 1TB + WD Red 4TB | JVC HA-RX900 | Dell U2312HM + BenQ G2400WD | Asus Echelon Mechanical Keyboard | Logitech G400s

Khrono Devil
Posts: 38
Joined: Sat Jun 02, 2007 2:18 am
Location: New Zealand

Post by Khrono Devil » Thu Jun 07, 2007 5:34 am

Sweet a 200x200mm radiator, thats only 8% smaller than a PA120.3. Lets hope that the 200mm fan is quiet. To bad it doesn't have a door or use the P180s design.

I would of rather seen the P190 add like 2-3 inches to the top of the case so you could mount a 120.2/3 + 25mm shroud easily inside it, It already has 2 - 140mm fans in the top.

After owning the Stacker 810 for quite some time now and recently purchasing a P182 for my office. Stacker type cases just don't cut it for me anymore. They are loud, huge and cost a arm and a leg for very little performance gains unless you have the best ( and hottest ) hardware around.
[size=75]Intel C2Q QX6700 460x8 (3.68 Ghz), 2GB Crucial Ballistix PC6400, ABIT IN9 32X-MAX (680i), 2x XFX 8800GTS XXX 640MB SLi, 2x Seagate Barracuda 7200.10 320GB (RAID 0), Dell UltraSharp 2707WFP 27" LCD, Cooler Master Stacker 810. Swiftech Apogee GTX, Danger Den 8800GTS WB, Thermochill PA120.3, Laing D5 (MCP655).[/size]

Sylph-DS
Posts: 223
Joined: Wed Apr 04, 2007 2:56 am
Location: The Netherlands

Post by Sylph-DS » Thu Jun 07, 2007 6:40 am

The Mini-P180 looks interesting, kind of a bummer that it only takes micro-ATX..

It seems Antec is getting the taste of huge fans, without going for sidefans. I like it.

Now lets hope Yate Loon starts manufacturing 200mm fans soon :)
[size=75][b]Idiot. Geek. Sylph.[/b]
[i]Now, where did I leave my motivation?[/i][/size]

rpsgc
Friend of SPCR
Posts: 1630
Joined: Tue Oct 05, 2004 1:59 am
Location: Portugal

Post by rpsgc » Thu Jun 07, 2007 11:51 pm

More Mini-P180 pics, again courtesy of Matbe ;)
Fractal Define R4 | Corsair AX750 | MSI Z97 Gaming 5 | Intel Core i7 4770K w/TRUE 120 Rev. C | 16GB G.Skill Sniper DDR3-1866 | Sapphire Nitro+ RX 480 8GB OC | Crucial m4 128GB + Crucial MX100 512GB + WD Blue 1TB + WD Red 4TB | JVC HA-RX900 | Dell U2312HM + BenQ G2400WD | Asus Echelon Mechanical Keyboard | Logitech G400s

disphenoidal
Posts: 333
Joined: Wed Apr 05, 2006 9:54 pm
Location: USA

Post by disphenoidal » Fri Jun 08, 2007 1:04 am

I must have that mini P180.
[size=75][i]Athlon64 3000+ @ 2.6 GHz, Radeon 9550, Seasonic S12-380, Zalman CNPS7000-Cu, Yate Loon 120mm, Centurion 5 case
Core2Duo E6320 @ 2.4GHz, Seasonic S12-330, Zalman CNPS7000-AlCu, Yate Loon 120mm, Ultra MicroFly[/i][/size]

bean1975
Posts: 90
Joined: Thu Jan 12, 2006 3:46 am
Location: Vancouver

Post by bean1975 » Fri Jun 08, 2007 2:21 am

Lookin' at the mini P180 pix, one wonders how can one of the fans 120mm and the other 200mm -- is the chassis that wide? The only difference seems to be the motherboard tray and that surely is not more than 10-20mm.

AudiQ7
Posts: 18
Joined: Sat Sep 09, 2006 7:28 am
Location: UK and Romania

Post by AudiQ7 » Fri Jun 08, 2007 4:32 am

An improved Antec SOLO ( a lil' bigger H44xW21xD52 ) with the outside look of a mini P180 and 140 cm fan's ( or at least for the rear ) whould be a very nice thing.
But I whould be satisfied with the bigger Solo with 14 cm fans.

PS : A Seasonic PS with 14 cm fan should be a great idea too.
[size=67]Phenom II X3 720BE :J&W JW-790GX-EXTREME :Geil Ultra 2x2GB DDR2 800 CL4 :Samsung HD322HJ :Nec AD-7203S :Audigy SE @ X-Fi Extreme Audio :Razer Deathadder :Logitech UltraX Premium : Corsair CX400W <<>> Old : Athlon X2 4000+,BOX :ABIT KN9-S :Samsung HD321KJ :Nec AD-7170S :Palit 7300GT 256MB/128bit :Enermax Liberty 500 :Samsung 795DF Black/Silver :A4tech SWOP-48[/size]

audiojunk
Posts: 17
Joined: Fri Feb 16, 2007 3:37 am
Location: Holland

Post by audiojunk » Fri Jun 08, 2007 5:45 am

No NSK2450 :cry:

HueyCobra
Posts: 217
Joined: Tue Feb 14, 2006 12:16 am
Location: Australia

Post by HueyCobra » Tue Jun 12, 2007 7:04 pm

The M-P180 has also got me interested. MicroATX doesn't trouble me overly. (One more picture at AnandTech.)

With the 120mm and 200mm fans, I'm dreaming of a passive setup with a Scythe Mini Ninja 8)

jaldridge6
Posts: 319
Joined: Wed May 09, 2007 2:31 am
Location: Hell

Post by jaldridge6 » Tue Jun 12, 2007 11:23 pm

the thing with the 20cm fans is, that, there aren't a lot of them, and, the one antec includes has a very noisy clicking sound to it. the 20cm fan I had with my 900 was horrendous. well, all the fans were, but we're on 20cm here, right ;) ... the tricool 12cm fans in one of my p180 cases, 2 failed after only a month. Anyways, removing the 20cm fan and selling it on ebay is a viable option. having the top as a large vent would prove useful.

HueyCobra
Posts: 217
Joined: Tue Feb 14, 2006 12:16 am
Location: Australia

Post by HueyCobra » Thu Jun 14, 2007 4:38 am

Thanks for the observation, jaldridge6. Is the clicking present with the fan at minimum voltage/RPMs?

pputer
Posts: 155
Joined: Wed May 02, 2007 5:05 am

Post by pputer » Thu Jun 14, 2007 9:25 pm

Sorry to interrupt but could someone tell me what improvement was made regarding Antec's P182 case and whether it warrants spending extra on it? I found the P180 under $100 on their site for the B-Stock cases. Could one just go to a bit more trouble in organizing the cables?

I am just wondering what is meant by:
"better cable management options"

nightmorph
Posts: 316
Joined: Thu Aug 10, 2006 11:07 am

Post by nightmorph » Thu Jun 14, 2007 10:09 pm

pputer wrote:Sorry to interrupt but could someone tell me what improvement was made regarding Antec's P182 case and whether it warrants spending extra on it? I found the P180 under $100 on their site for the B-Stock cases. Could one just go to a bit more trouble in organizing the cables?

I am just wondering what is meant by:
"better cable management options"
Well, you could always try reading SPCR's recent review of the P182.

pputer
Posts: 155
Joined: Wed May 02, 2007 5:05 am

Post by pputer » Fri Jun 15, 2007 6:49 am

I should have, thanks. Now, I don't know what to do! :wink:

Is it worth $50 extra to have the cabling neatly arranged for you? Can you do it yourself in a P180? I would go with a P182 if I bought a brand new case or the silver P180 if I bought it at Antec (B-Stock). It might be worth $50 if the cooling is more efficient and you obtain cooling easier? Still, it adds to the budget.

DaY8Ge=)
Posts: 3
Joined: Thu Sep 08, 2005 8:44 pm
Location: japan
Contact:

More PIX

Post by DaY8Ge=) » Tue Jun 19, 2007 12:04 am


mexell
Posts: 307
Joined: Sat Jun 24, 2006 11:52 am
Location: (near) Berlin, Germany

Post by mexell » Tue Jun 19, 2007 1:09 am

Why do you all speak of mini-ninjas? There should be a full size ninja fitting in easily. I think the mini is just less tall, so if there fits a 20cm fan, why not a real ninja?

thejamppa
Posts: 3142
Joined: Mon Feb 26, 2007 9:20 am
Location: Missing in Finnish wilderness, howling to moon with wolf brethren and walking with brother bears
Contact:

Post by thejamppa » Tue Jun 19, 2007 1:56 am

Hmmm, because Minja ( Mini-Ninja ) is so cute and goes so well with Antec Mini cases?? But I think I would like to pair them just for fun...
If seeing is believing, how can blind person believe in anything?
Maturity is just not experience in life but also ability to make compromises.

mexell
Posts: 307
Joined: Sat Jun 24, 2006 11:52 am
Location: (near) Berlin, Germany

Post by mexell » Tue Jun 19, 2007 2:25 am

Doesn't make real sense... with that 200mm fan up there and a normal ninja you could probably cool a QX6800 semi-passive without taking further action... And, a mini ninja isn't a lot cheaper than the normal from what I've heard, and cooling is inferior.

Aris
Posts: 2299
Joined: Mon Dec 15, 2003 10:29 am
Location: Bellevue, Nebraska
Contact:

Post by Aris » Tue Jun 19, 2007 6:14 am

mini p180...... is it just me, or does it look almost exactly like an nsk3400 with a new "p180 styled" bezel, and the psu area put on the bottom instead of the top?

i honestly dont understand why they put the psu zone on the bottom on either version of the p180. you can isolate it thermally with it at the traditional top rear of the case, just like they did in the NSK3400. All it does is create issue's with wiring not being long enough.

not a fan of the original fridge, so the mini fridge look is just as bad IMO. i'll stick with the NSK3400 for micro atx, and the solo/p150 for full atx.

vitaminc
Posts: 306
Joined: Mon Mar 27, 2006 8:11 am
Location: Silicon Valley, California

Post by vitaminc » Tue Jun 19, 2007 9:05 am

Aris wrote:mini p180...... is it just me, or does it look almost exactly like an nsk3400 with a new "p180 styled" bezel, and the psu area put on the bottom instead of the top?

i honestly dont understand why they put the psu zone on the bottom on either version of the p180. you can isolate it thermally with it at the traditional top rear of the case, just like they did in the NSK3400. All it does is create issue's with wiring not being long enough.

not a fan of the original fridge, so the mini fridge look is just as bad IMO. i'll stick with the NSK3400 for micro atx, and the solo/p150 for full atx.
NSK3400 won't work well if you want to have 4+ HDD.

Mini P180 looks pretty danm nice. enough slots to fit 8 HDD for my file server.
Athlon 64 3200+ | ASUS M2A-VM | Corsair XMS2 | 3ware 9650SE 4LPML | Seasonic SS-380HB | Antec Solo
Core 2 Quad Q6600 | ASUS P5WDG2-WS Pro | Gigabyte 4850HD Silent | G.Skill 4x1GB | Samsung SLC SSD | Seasonic M12 650 | Antec P180
Core i7-2600K @ 4.3 GHz, 1.30V | ASUS P8P67 Pro | Sparkle GTX 560 Ti | G.Skill Ripjaw X @ 933MHz 9-10-9-24 2T | Crucial C300 128GB | Seasonic X750 Gold | Antec P183

Gunbuster
Posts: 98
Joined: Sat Jun 21, 2003 12:27 am
Location: Scotland, UK

Post by Gunbuster » Fri Jun 29, 2007 11:59 pm

That Mini-P180 looks awesome, any idea when it will be out as I was due to build my new system this month. If its too long would a tempory measure of a Akasa Zen be a good idea?

Any way for LOADS of images of the MINI-P180 check out this http://park15.wakwak.com/~hage/minip180 ... ample.html

HueyCobra
Posts: 217
Joined: Tue Feb 14, 2006 12:16 am
Location: Australia

Post by HueyCobra » Sat Jun 30, 2007 4:06 am

mexell wrote:Why do you all speak of mini-ninjas? ... with that 200mm fan up there and a normal ninja you could probably cool a QX6800 semi-passive without taking further action
I liken it to correct PSU sizing with weight replacing wattage :) Ok, weight isn't that big an issue, but I prefer a light CPU cooler with less cantilever effect, particularly when I need to move my computer.

Performance-wise, I'm not worried about the Mini Ninja, especially as new CPUs continue to be more efficient. When I bought my new (now 5-month-old) rig, I couldn't get a Thermalright XP-120 and was concerned that an XP-90 may not cool the C2D E6600 very well. But the XP-90 does an excellent job: ~20° after cold boot and ~25° during normal use according to TAT (for CPU0; CPU1 is usually 4-5° lower). I don't foresee problems with a fanless Mini Ninja in an M-P180 (or whatever it's going to be called) for my uses.

Sure, a bigger cooler would take off more degrees, providing more headroom for overclocking and upgrades, and would be safer under all possible conditions - wait, that's starting to sound familiar. Oh yeah, that's why you need an 850W PSU :D

I have nothing against big coolers or big (and efficient) PSUs, I just don't happen to need either 8)
Gunbuster wrote:Any way for LOADS of images of the MINI-P180 check out this http://park15.wakwak.com/~hage/minip180 ... ample.html
Look up ;)

Post Reply