Enclosures and acoustic damping to help quiet them.
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
-
Vicotnik
- *Lifetime Patron*
- Posts: 1831
- Joined: Thu Feb 13, 2003 6:53 am
- Location: Sweden
Post
by Vicotnik » Sun Oct 12, 2008 1:18 pm
I'm planning a new build, in a SFF case if it's possible.
I was thinking the Antec NSK1380 with the PSU removed (will be using a Pico PSU 120W) and a Slipstream 800RPM in it's place, a GA-MA78GM-S2H and a X2 4850e with a Minja.
Will it fit? If not, is there another passive cooler that does?
-
KyonCoraeL
- Posts: 45
- Joined: Sun Jun 01, 2008 6:40 pm
- Location: Vancouver BC, Canada
Post
by KyonCoraeL » Sun Oct 12, 2008 10:49 pm
well if you are using a pico psu you should be able to fit it in, I think some other members have done so in teh past.
-
AuraAllan
- *Lifetime Patron*
- Posts: 713
- Joined: Wed Mar 07, 2007 7:49 am
- Location: Denmark
Post
by AuraAllan » Mon Oct 13, 2008 6:27 am
If you will be using a pico and you pull out the drive cage you can fit a "normal" Ninja in it.
Like I did.
I dont think a Minja will fit under the drive cage.
-
Vicotnik
- *Lifetime Patron*
- Posts: 1831
- Joined: Thu Feb 13, 2003 6:53 am
- Location: Sweden
Post
by Vicotnik » Fri Oct 17, 2008 7:25 am
Well it fits, sort of. Had to do some quick dremel work.
Luckily the Minja is short enough for an optical drive to fit. Next problem is to figure out were to put my 3.5" HDD. I might skip the DVD-RW and only connect it via USB when needed. Then I can keep the WD GP in its Quiet Drive.
-
thunderpeteii
- Posts: 16
- Joined: Fri Jul 04, 2008 12:01 pm
- Location: Arizona
Post
by thunderpeteii » Sat Oct 18, 2008 12:31 am
hmmm, well i just suspended a 2.5'' notebook drive in the 3.5 inch drive bay
-
AuraAllan
- *Lifetime Patron*
- Posts: 713
- Joined: Wed Mar 07, 2007 7:49 am
- Location: Denmark
Post
by AuraAllan » Sat Oct 18, 2008 3:13 am
Wow, it JUST fits
Good job.
Skip the internal optical if your not using it.
Thats what I did.