It would be interesting to know your analysis about Raijintek's new case. Does it have potential to build a quiet PC?
Raijintek Aeneas mATX Cube Case
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
Re: Raijintek Aeneas mATX Cube Case
288×380×430 mm - for MicroATX that really is massive! That's bigger than many ATX cases. Not content with putting a MicroATX board on it's side across the case they've then added a 5th slot to it to make it even wider! I really wouldn't. If you want a silent MicroATX case and it doesn't need to be especially small then the Define Mini is a much better proposition. If a compact footprint is important then Silverstone have many offerings such as the TJ-08E.
It seems overly designed around water cooling which means that it will not be ideal for a low airflow silent system.
The dual zone cooling seems built around the idea of lots of hard disk drives and in such a system you won't get silence anyway. Also given that the bottom chamber has a 120mm fan on the back adjacent to a PSU slot on it's side, it won't be ideal for use of a passive PSU as the natural passive cooling of the PSU won't function well when air is eddying in and out of it from the 120mm fan next to it.
I would also have to bring up that it has a name that really doesn't work well in the English language. Aeneas just sounds too much like anus.
It seems overly designed around water cooling which means that it will not be ideal for a low airflow silent system.
The dual zone cooling seems built around the idea of lots of hard disk drives and in such a system you won't get silence anyway. Also given that the bottom chamber has a 120mm fan on the back adjacent to a PSU slot on it's side, it won't be ideal for use of a passive PSU as the natural passive cooling of the PSU won't function well when air is eddying in and out of it from the 120mm fan next to it.
I would also have to bring up that it has a name that really doesn't work well in the English language. Aeneas just sounds too much like anus.
Re: Raijintek Aeneas mATX Cube Case
If you wanted to work at it, I'm sure you could do it, but it doesn't look made for it, by a mile.
Silverstone's PS07 can easily be made inaudible when idling for any hardware that fits, though is a challenge for heavy loads, and the TJ08-e can be made whisper quiet for almost any load (the big fan blades right up against the filter, without indirect intakes, makes inaudibility difficult, though). Then, there's the Define Mini and Nanoxia Deep Silence Minis, for damped/closed cases.
It looks to me like a me-too of the Corsair Air 240, but without nearly the thought put into it.
Silverstone's PS07 can easily be made inaudible when idling for any hardware that fits, though is a challenge for heavy loads, and the TJ08-e can be made whisper quiet for almost any load (the big fan blades right up against the filter, without indirect intakes, makes inaudibility difficult, though). Then, there's the Define Mini and Nanoxia Deep Silence Minis, for damped/closed cases.
It looks to me like a me-too of the Corsair Air 240, but without nearly the thought put into it.
Re: Raijintek Aeneas mATX Cube Case
Thanks for your opinions, guys. It seems, that it's not as cleverly designed as I thought when saw it. Corsair Carbide Air 240 looks like both an innovative and beautiful case.
Re: Raijintek Aeneas mATX Cube Case
These are a very well made chassis , the design is a bit "iffy" they are not great for water cooling either ( AIO. coolers aside - with their noisy pumps and lacklustre performance and all )
They look to be designed to be built with an all in one liquid cooler in the roof - or a large air cooler and a 300mm graphics card ( or 2 )- should tell you who it is made for !
I had hopes for it as I am looking for a horisontal mobo case - because for me height is a problem the width not so much .
But it is definitely better than the Coolermaster N200 p.o.s. that I have at present .
They look to be designed to be built with an all in one liquid cooler in the roof - or a large air cooler and a 300mm graphics card ( or 2 )- should tell you who it is made for !
I had hopes for it as I am looking for a horisontal mobo case - because for me height is a problem the width not so much .
But it is definitely better than the Coolermaster N200 p.o.s. that I have at present .