Client attempting to get work packets...
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Client attempting to get work packets...
my client is attempting to get a work packet...
Not a problem itself, but it's been doing it for nearly four hours... is this normal? I feel like I am losing folding time
Not a problem itself, but it's been doing it for nearly four hours... is this normal? I feel like I am losing folding time
You're problem is eerily similar to mine -- I have a P4 3.06 running two instances. It will send completed units without a problem but will sit for hours on end trying to get new WU's. Stopping and restarting the client will allow it to get a new WU immediately.Memony wrote:Thanks it seems to do it for every new work unit now, was something like six hours before I shut down F@H for a few mins, relaunched and away it went folding on
Other machines in the same place, running the same v4 client do not have the problem. It appears to be machine specific in my case. It's been doing this (on and off) for about a week.
Dave
Hmmm, this is starting to annoy me a little
Still struggling to get a work packet, I have tried different versions of the client, with and without firewall etc..etc..etc..
When it picks up a work packet, fine. Trouble is, it can go for many hours looking (nine hours is the most so far).
Is this normal?
Still struggling to get a work packet, I have tried different versions of the client, with and without firewall etc..etc..etc..
When it picks up a work packet, fine. Trouble is, it can go for many hours looking (nine hours is the most so far).
Is this normal?
-
- Patron of SPCR
- Posts: 2674
- Joined: Sun Jul 04, 2004 6:07 am
- Location: Houten, The Netherlands, Europe
This certainly is not normal. Someone with a similar problem was assisted in this thread on another forum.