system lockup sending results and error message

A forum just for SPCR's folding team... by request.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
york
Posts: 91
Joined: Mon Dec 20, 2004 3:16 pm
Location: Florida, US

system lockup sending results and error message

Post by york » Fri Aug 26, 2005 3:21 am

I'm getting this error in the console (in the logs it shows no recored of the issue its shows that the packet sent)

attempting to send results
unknown packet returned from server, expected ACK for results
could not transmit unit 04 to Collection server; keeping in queue.

During this attempted send the computer pretty much locks up for x amount of seconds then comes back with no issues.
I recently switched the os from 2k to xp pro, also upgraded zonealarm to its newest release of 6.xxxx I forget if I had it running before the xp upgrade or not. I just deleted everything in my folding folder and did the console config over again, I'll post again once it attempts to upload.

Help :(

peteamer
*Lifetime Patron*
Posts: 1740
Joined: Sun Dec 21, 2003 11:24 am
Location: 'Sunny' Cornwall U.K.

Post by peteamer » Fri Aug 26, 2005 8:45 am

york, sounds like the server at the other end may be the prob.

You should be able to find the I.P addy F@H is trying to send to in the log file and check for probs at Stanford here: http://vspx27.stanford.edu/serverstat.html

5!!! were listed as down when I checked 20secs ago...
And 5 not accepting or offline...


Pete

york
Posts: 91
Joined: Mon Dec 20, 2004 3:16 pm
Location: Florida, US

Post by york » Sat Aug 27, 2005 11:40 pm

Edit: Ok this is a zonealarm issue, the newest version allows a lot more program components to be blocked. I have a bunch of tabs and check boxes to go through. Sometimes ZA does not turn all the way off when you close its tray program, I tried doing that again and the packets went through with no system lock issue.

Post Reply