Join the SPCR Folding@Home effort
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 154
- Joined: Thu Oct 17, 2002 5:53 pm
- Location: Sydney
Thanks for the welcome. Anyway I'm currently using the -advmethods -forceSSE flags in the CLI console. I'm going to configure it with that electron microscope 3 software to run at startup etc.
Anyway when uni starts again in a few weeks I'll be on an always on connection so that should improve the situation.
At the moment I'm just waiting to get the first work unit in to open my account. I'm working on a WU from project 731 which at least seems to be a low point, relativly fast WU so I'll get my first one in pretty fast.
Anyway when uni starts again in a few weeks I'll be on an always on connection so that should improve the situation.
At the moment I'm just waiting to get the first work unit in to open my account. I'm working on a WU from project 731 which at least seems to be a low point, relativly fast WU so I'll get my first one in pretty fast.
That's an excellent question Michael. I am not aware of any utilities for queuing Folding@Home (although one may exist), but there is one for Genome@Home, whose points also contribute to the team's score. FAH work units have deadlines, so queuing up work can be dicey, but GAH units do not have deadlines, so is a more appropriate project for machines without permanent Internet connections.Michael_qrt wrote:can someone tell me how to que up work so my machine always has something to do when not connected?
With F@H, you can tell it to ask before connecting, so that you can send and receive results when you are connected, but that will leave your PC idle between connections.
I'm afraid that is about the extent of my knowledge on the subject.
David
-
- Posts: 542
- Joined: Mon Aug 11, 2003 5:54 pm
With XP pro, I would think that you could set up multiple user accounts with clients installed on each account then download a WU's and stop each of them,switch user, download-stop etc. The only problems is that you would have to manually switch users and restart client WU at or probrably better near the end of finishing the WU. I have been thinking of trying this for future puposes.(notebook purchace before vacation)
This is untested (by me) but might be worth a try if you have XP pro.
This is untested (by me) but might be worth a try if you have XP pro.
-
- Posts: 154
- Joined: Thu Oct 17, 2002 5:53 pm
- Location: Sydney
Well in any case in a few weeks I'll be on a permanent connection so there isn't too much motivation to fool around. my machine is online most of the day and I generally turn it off at night (still not quiet enough). So I'm going to look into quietening it a bit more over the next few weeks so can leave it on 24/7 once I am on a permanent connection.
Also as haysdb mentioned there is a time limit on work units (though I think I could still que up a few units) So it wouldn't be possible over extended periods of time.
Also as haysdb mentioned there is a time limit on work units (though I think I could still que up a few units) So it wouldn't be possible over extended periods of time.
Yes, you could run multiple CLI clients. No need for separate user accounts, just assign each one a separate "Machine ID". Each would run slower, but at least you would have work. Run them with -oneunit so they would stop at the end of a WU. When you connect, fire each one up so it can download a new work unit.
David
David
I am embarrassed that I don't know the answer to this, but if F@H is installed in the All Users Startup folder, won't EACH user get an instance of F@H, or will all users run the SAME instance? I think it's the former, and that when user #2 logs on, a second instance of F@H will try to run, but it will recognize that another instance with the same Machine ID is already running and will immediately exit. If the first user then logs off, F@H will stop running, and there will be no instances running, even though user #2 remains logged on.peteamer wrote:Just incase anyone wants to know... on XP Pro, F@H is installed globaly, so switching users wont make any difference.
The advantage of running F@H as a service is that nobody has to be logged on. F@H will start immediately at boot, before anyone logs on, and will remain running when users log off.
Exactly. No difference. There will be a very slight penalty in PPD/PPW for running two or three instances of F@H, but it's not going to be THAT great. However, if your "Performance fraction" goes below .8, you risk getting Tinkers, so it's a balancing act.Would it not be like installing on a multi proc or HT machine?
-
- Posts: 39
- Joined: Sat Oct 04, 2003 4:44 pm
- Location: Venice
- Contact:
davide_casarin wrote:ARM_systems...
I have looked at your production. Can you describe me how you hacked the earth simulator of yokoama to make it fold for SPCR ?
When you look at the amount of computational power world-wide, participating in the Folding@Home project, it makes even the earth simulator look like a Commodore 64!
Um, speaking of folding for SPCR... hint hint
David
-
- Posts: 39
- Joined: Sat Oct 04, 2003 4:44 pm
- Location: Venice
- Contact:
noisy folding
I just joined the team, but the process makes a ~20Khz noise and if i hadn't killed it after 1 minute then you all would have to quit it and start a new headache@home program to cure me.
Look, the noise is not in the earphones: it comes straight from the mobo.
This board likes to do it, exp. at 100 load. CpuIdle with Athlon C2 cooling does exatcly the same so i have to step back to an ok S2 and that's a pity, the C2 is a freezer.
it's a biostar M7VKB with NB VIA KT133A and SB VIA 686B.
When I have switched it with the asus, will try it again, but by now my spare cycles remain for unnoisy kazaa and CpuIdle.
Look, the noise is not in the earphones: it comes straight from the mobo.
This board likes to do it, exp. at 100 load. CpuIdle with Athlon C2 cooling does exatcly the same so i have to step back to an ok S2 and that's a pity, the C2 is a freezer.
it's a biostar M7VKB with NB VIA KT133A and SB VIA 686B.
When I have switched it with the asus, will try it again, but by now my spare cycles remain for unnoisy kazaa and CpuIdle.
-
- Posts: 151
- Joined: Fri Jan 23, 2004 7:02 pm
- Location: Chicago, IL
Re: noisy folding
Welcome to the fold davide_casarin.davide_casarin wrote:I just joined the team, but the process makes a ~20Khz noise and if i hadn't killed it after 1 minute then you all would have to quit it and start a new headache@home program to cure me.
Look, the noise is not in the earphones: it comes straight from the mobo.
This board likes to do it, exp. at 100 load. CpuIdle with Athlon C2 cooling does exatcly the same so i have to step back to an ok S2 and that's a pity, the C2 is a freezer.
it's a biostar M7VKB with NB VIA KT133A and SB VIA 686B.
When I have switched it with the asus, will try it again, but by now my spare cycles remain for unnoisy kazaa and CpuIdle.
Is that noise only when your CPU is at 100% load? If so you could set F@H to use a percentage of the cpu lower than 100%, say 80%. That way you could still fold until you resolve the headache@home issue
Yeah, you ain't gettin' off the hook THAT easy dude!
I do understand the irony though. You come here to make your computer quiet, then us "Folders" come along and ask you to make things noisy again. That's the next challenge for many of us. Making a computer quiet is EASY, so long as it's not DOING anything!
David
I do understand the irony though. You come here to make your computer quiet, then us "Folders" come along and ask you to make things noisy again. That's the next challenge for many of us. Making a computer quiet is EASY, so long as it's not DOING anything!
David
Movin' On Over
I am moving my folding efforts to SPCR!
I was with that team at #1, but I spend so much more time here, that it only felt right to switch.
Right now I am scoring ~1200 points a week, and I have 2 more XP2500's coming in the next week or so. As many have said, it becomes addicting, especially when you NEED an excuse to build another PC.
Current Setup:
P4 2.4B @ 2.57, 2GB PC2100 and FireGL8800 (CAD Workstation)
Silent with SLK-900U and 92mm Panaflo, Coolmax Taurus
Cel 1.3, fanless in Soyo TIS2 (Server)
3700BQE with 120mm Front and Rear Not silent, but lives in a closet.
2400+ Laptop (Emachines 5310) only Folds when we are not home
2500+, M7NCG-400, 9600NP, SLK-900A (HTPC), Coolmax Taurus 300W
This machine lives two lives, Folder ~98% of the time OC to 3200+, and great <20db DVD playback at 100x13.
Upcoming are two more AMD "blades" based on the great research by haysdb, though they will run Windows for the time being. I do not really have the desire or motivation to even dabble in linux at this point.
I should start adding points to SPCR tomorrow.
Brent
I was with that team at #1, but I spend so much more time here, that it only felt right to switch.
Right now I am scoring ~1200 points a week, and I have 2 more XP2500's coming in the next week or so. As many have said, it becomes addicting, especially when you NEED an excuse to build another PC.
Current Setup:
P4 2.4B @ 2.57, 2GB PC2100 and FireGL8800 (CAD Workstation)
Silent with SLK-900U and 92mm Panaflo, Coolmax Taurus
Cel 1.3, fanless in Soyo TIS2 (Server)
3700BQE with 120mm Front and Rear Not silent, but lives in a closet.
2400+ Laptop (Emachines 5310) only Folds when we are not home
2500+, M7NCG-400, 9600NP, SLK-900A (HTPC), Coolmax Taurus 300W
This machine lives two lives, Folder ~98% of the time OC to 3200+, and great <20db DVD playback at 100x13.
Upcoming are two more AMD "blades" based on the great research by haysdb, though they will run Windows for the time being. I do not really have the desire or motivation to even dabble in linux at this point.
I should start adding points to SPCR tomorrow.
Brent
Re: Movin' On Over
While we don't "recruit" from other teams, we are tickled plumb silly to have you fold with us.BMW wrote:I am moving my folding efforts to SPCR!
I was with that team at #1, but I spend so much more time here, that it only felt right to switch.
[Heads nodding all around. A few worried looks. ]Right now I am scoring ~1200 points a week, and I have 2 more XP2500's coming in the next week or so. As many have said, it becomes addicting, especially when you NEED an excuse to build another PC.
I am a big fan of the Biostar M7NCG-400. I have tried a LOT of microATX motherboards (at least 8 ), and it is my favorite by far. Stable, overclockable, nice feature set, and not expensive, especially compared to other nForce2 boards.2500+, M7NCG-400, 9600NP, SLK-900A (HTPC), Coolmax Taurus 300W
This machine lives two lives, Folder ~98% of the time OC to 3200+, and great <20db DVD playback at 100x13.
What is 100x13?
Thank you. I had a lot of help, from CharlieChan, Lockheed, and others.Upcoming are two more AMD "blades" based on the great research by haysdb, though they will run Windows for the time being. I do not really have the desire or motivation to even dabble in linux at this point.
Will they be dedicated folders or double as servers or perform other duties?
Outstanding! Just in time to help us pass Team MacOS X.I should start adding points to SPCR tomorrow.
Do you fold under this username? Good name.
David
-
- *Lifetime Patron*
- Posts: 1465
- Joined: Sun Mar 09, 2003 12:27 pm
- Location: Reading.England.EU
Re: Movin' On Over
Including mine - saw BMWBMW somewhere in my rearview mirrorhaysdb wrote:[Heads nodding all around. A few worried looks. ]BMW wrote:Right now I am scoring ~1200 points a week, and I have 2 more XP2500's coming in the next week or so. As many have said, it becomes addicting, especially when you NEED an excuse to build another PC.
(Where I come from it stands for Break My Windows BTW.)
Was wondering if we have (or need) a thread for desperate grasps at points? Am just busy staging a new PC for a family member and so far have only the SFF delivery. Dug out the old Thunderbird 1.4, borrowed a stick of DDR and optical drive from a live system, sharing a keyboard & monitor with a live system. Boot Knoppix from the CD and am folding on a pendrive - way to go!! Should be worth about 20ppd until that Barton upgrade arrives for me (and I hand down a Tbred!)
I don't claim any recruiting to join SPCR, just what felt right.
The 100x13 reference is FSBxMultiplier when I watch movies, etc. This way, I undervolt to ~1.0V and run with just the HSF and PSU fans.
The new blades will be dedicated folders for the time being. As I build new PCs for friends and family, the parts will get used, moved, and replaced as necessary.
I wanted to fold under BMW, but it was taken, so a complete lack of imagination created BMWBMW for folding.
I like the thread for desperate grasps at points. I have a Gateway P3-500 (the first PC I ever bought, circa 1998?), that just needs some PC100 memory. I just can't get myself to pay real money for it. Damn emotional attchments.
Brent
The 100x13 reference is FSBxMultiplier when I watch movies, etc. This way, I undervolt to ~1.0V and run with just the HSF and PSU fans.
The new blades will be dedicated folders for the time being. As I build new PCs for friends and family, the parts will get used, moved, and replaced as necessary.
I wanted to fold under BMW, but it was taken, so a complete lack of imagination created BMWBMW for folding.
I like the thread for desperate grasps at points. I have a Gateway P3-500 (the first PC I ever bought, circa 1998?), that just needs some PC100 memory. I just can't get myself to pay real money for it. Damn emotional attchments.
Brent
-
- Posts: 151
- Joined: Fri Jan 23, 2004 7:02 pm
- Location: Chicago, IL
Brent, welcome to the team and congrats on your first points for the team.BMW wrote:I don't claim any recruiting to join SPCR, just what felt right.
The 100x13 reference is FSBxMultiplier when I watch movies, etc. This way, I undervolt to ~1.0V and run with just the HSF and PSU fans.
The new blades will be dedicated folders for the time being. As I build new PCs for friends and family, the parts will get used, moved, and replaced as necessary.
I wanted to fold under BMW, but it was taken, so a complete lack of imagination created BMWBMW for folding.
I like the thread for desperate grasps at points. I have a Gateway P3-500 (the first PC I ever bought, circa 1998?), that just needs some PC100 memory. I just can't get myself to pay real money for it. Damn emotional attchments.
Brent
Your at ~1200 ppw and your adding MORE blades? :shocked: Uh oh, you're really starting to scare me now.
I wonder if my old Pentium MMX would make up for your new blades :lol
In the Folding@Home directory ( C:\Program Files\Folding@Home ? ), there will be a file named FAHlog.txtGOODFELLA wrote:I planned on doing some folding, but the program creates an error in Windows XP pro and shuts down.
Anyone heard of this happenning?
Ill post more information if its needed.
Cut and paste one entire session, from start to end (it shouldn't be more than 20 or 30 lines), into a reply. We'll have you up and folding in no time.
David
According to the EOC stats,edcrane wrote:No wonder team OSX needs so many members.
Macrumors.com has on average 64.67 PPD per active user.
Team MacOS X has on average 70.75 PPD per active user.
SilentPCReview has on average 165.05 PPD per active user.
I have a spreadsheet at home that has all of the fun little statistics. 2CPU has a really high PPD per active user. As does The Knights Who Say Ni!. 361 and 255 respectively.