Is there a way to login to a wireless router (to access the router's settings) wirelessly?
I am able to connect a PC to the router's WiFi network (though Windows states it is an "Unidentified network"), and I'm able to access the router's settings when the router is plugged into a PC with a network cable, but I cannot access the settings wirelessly.
access wireless router
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 376
- Joined: Mon May 15, 2006 12:24 pm
- Location: CA, USA
Re: access wireless router
On the routers I've come across it is possible to administer them wirelessly, but this is disabled by default because it's a potential security hole. There should be an option under settings to enable this.
-
- Posts: 376
- Joined: Mon May 15, 2006 12:24 pm
- Location: CA, USA
Re: access wireless router
Thanks. There doesn't seem to be a setting to enable/disable wireless admin. I'm thinking it might be something more complicated. It is a second router and my goal is to use it as a dedicated wireless print server on my wireless LAN. But first I'm just trying to configure it to play nice with my existing wireless LAN. I'm not sure how I need to configure it. For the time being I'm happy to administer it via network cable.
-
- Posts: 376
- Joined: Mon May 15, 2006 12:24 pm
- Location: CA, USA
Re: access wireless router
OK, I am able to access it wirelessly now. I think it was conflicting with my other wireless router, because after I changed the router IP and rebooted the PC it worked. Also Windows no longer says "unidentified".
Re: access wireless router
It sounds like you want to use it as a wireless bridge. Many "home use" wireless routers don't support this.
In any case you don't want two routers in their default configuration on the same network. They both will try to hand out DHCP leases and claim to be the default gateway. However, since only one has an internet connection if you get an IP from the other one it won't work. You should turn off the routing and DHCP functions of the second router.
In any case you don't want two routers in their default configuration on the same network. They both will try to hand out DHCP leases and claim to be the default gateway. However, since only one has an internet connection if you get an IP from the other one it won't work. You should turn off the routing and DHCP functions of the second router.
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Re: access wireless router
But it is possible to convert a router to a bridge. See here: http://www.makeuseof.com/tag/how-to-tur ... ss-bridge/washu wrote:It sounds like you want to use it as a wireless bridge. Many "home use" wireless routers don't support this.
In any case you don't want two routers in their default configuration on the same network. They both will try to hand out DHCP leases and claim to be the default gateway. However, since only one has an internet connection if you get an IP from the other one it won't work. You should turn off the routing and DHCP functions of the second router.