Help me pick a video card

They make noise, too.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Zhentar
Patron of SPCR
Posts: 918
Joined: Thu Mar 27, 2003 4:00 pm
Location: Madison, WI, USA

Help me pick a video card

Post by Zhentar » Thu Oct 23, 2003 10:45 am

Okay, first, I'm not actually worried about the noise of the stock cooling. Stock cooling is way to unleet...

Anyways, I killed my GeForce3 Ti200. I want to order a new card today or tomorrow. I do play games a lot (Wolfenstein ET, BF1942, UT2003, to name a few). I'm not too concerned about video quality, i.e. I'll turn off AA and such for good enough frame rates. I'm looking not to spend much money; $150 is the absolute maximum.

I'm thinking maybe a GeForce4 Ti4200 for a real cheap price, about $80 on newegg. But I'm a 9600 pro could be had for $50 more, and would probably show an improvement in performance.

Any suggestions for what card/where to buy it so I can get good enough performance for the lowest price possible?

GamingGod
Posts: 2057
Joined: Fri Oct 04, 2002 9:52 pm
Location: United States, Mobile, AL

Post by GamingGod » Thu Oct 23, 2003 11:11 am

i think the the 9600pro is only faster with AA and stuff turned up otherwise its about the same or slower than a ti4200. Toms a videocard roundup that shows it

halcyon
Patron of SPCR
Posts: 1115
Joined: Wed Mar 26, 2003 3:52 am
Location: EU

Post by halcyon » Thu Oct 23, 2003 11:22 am

Unless of course if you plan on using that card in the future to play DX9 games, in which case 9600pro is probably faster.

wumpus
Patron of SPCR
Posts: 946
Joined: Sat Sep 06, 2003 9:57 pm
Location: Berkeley, CA, USA
Contact:

Post by wumpus » Thu Oct 23, 2003 12:20 pm

9600pro will run substantially cooler, though. The Ti4200 is using an older chip process.. which makes sense as it is an older card..

Zhentar
Patron of SPCR
Posts: 918
Joined: Thu Mar 27, 2003 4:00 pm
Location: Madison, WI, USA

Post by Zhentar » Thu Oct 23, 2003 12:42 pm

I think I'm gonna go with a 9600 pro; it does cost more, but only against the 64 mb 4200, and it should be more futureproof.

I don't care about cooler, I'll just be sticking on a waterblock anyways.

GamingGod
Posts: 2057
Joined: Fri Oct 04, 2002 9:52 pm
Location: United States, Mobile, AL

Post by GamingGod » Thu Oct 23, 2003 12:54 pm

if i was watercooling i would get a 9800non pro or pro because they are quite a bit faster than the 9600pro

Zhentar
Patron of SPCR
Posts: 918
Joined: Thu Mar 27, 2003 4:00 pm
Location: Madison, WI, USA

Post by Zhentar » Thu Oct 23, 2003 1:13 pm

But their also more expensive

This one just barely stays in my price range, at $149:
Sapphire Atlantis ATI RADEON 9600 PRO 128MB 8X AGP DVI/TV BULK

I guess I'll have to get it, and I wanted to spend that money on a new pump :(

GamingGod
Posts: 2057
Joined: Fri Oct 04, 2002 9:52 pm
Location: United States, Mobile, AL

Post by GamingGod » Thu Oct 23, 2003 1:15 pm

yea that price is tempting

Dethheat
Posts: 20
Joined: Sun Oct 05, 2003 7:25 pm

Post by Dethheat » Thu Oct 23, 2003 4:31 pm

GamingGod wrote:i think the the 9600pro is only faster with AA and stuff turned up otherwise its about the same or slower than a ti4200. Toms a videocard roundup that shows it
My 9500 Pro outperforms the Ti4600 in nearly all benchmarks (Doesn't win in 800x600 with no AA/AF but with AA/AF wins at every resolution). A 9600 Pro is much faster than a Ti4200.

Edit: I just read Tom's videocard roundup and it shows similar results.

ruprag
Posts: 323
Joined: Sun Apr 27, 2003 7:02 am
Location: Reykjavík, Iceland

Post by ruprag » Thu Oct 23, 2003 5:41 pm

I'd just go and get a stock passively cooled GF440MX :-)

I have one and I get 100 fps in 800x600 in CS which is quite good enough for me :-)


And the best thing is that then you can buy your pump also

1398342003
Posts: 324
Joined: Wed May 07, 2003 10:35 pm
Location: Surrey, B,C

Post by 1398342003 » Thu Oct 23, 2003 6:13 pm

My GF440MX can barely do 20FPS on my machine in UT2003 if there are any bots around, even with all detail set to minimum. But without bots I can get up to 220FPS at medium detail.

I wouldn't recomend it

Zhentar
Patron of SPCR
Posts: 918
Joined: Thu Mar 27, 2003 4:00 pm
Location: Madison, WI, USA

Post by Zhentar » Thu Oct 23, 2003 7:56 pm

that sounds like a CPU problem, <random numbers>

Anyways, the 9600 pro is ordered. I decided it would be better to get a DX 9 card since the way I go about this I won't want to upgrade again until they stop making AGP slots, and probably for some time after.

drfinalfantasy
Friend of SPCR
Posts: 86
Joined: Wed Jun 18, 2003 1:08 pm
Location: Naperville, IL
Contact:

ordered alread?

Post by drfinalfantasy » Fri Oct 24, 2003 5:41 am

Too bad your old card got fried. the new XT and Fx ultras are coming out which means the fx 5900 ultra and radeon 9800 pro will be dropping in price in next 1-3 months.

Eric

Post Reply