Recommendation for a small Linux Asterisk Computer
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Recommendation for a small Linux Asterisk Computer
Hi everyone,
I own a small business and have just recently purchased a tiny UDOO computer. It's very similar to a Rasberry PI. I have some issues with this setup and I'm looking to move up to an Intel Based low power computer. The system must be able to work nicely with Linux, specifically CentOS. I've heard that graphics drivers lately are a big issue.
Ideally, I'm looking for a very tiny, fanless system that I can put away in a cabinet somewhere in my office and have it run our phone systems.
I've been looking at different systems out there and I'm not sure whether building a system or buying a tiny barebones system would be the way to go. So far, the Gigabyte Brix system seems interesting. If you have any other recommendations or suggestions, please let me know.
I own a small business and have just recently purchased a tiny UDOO computer. It's very similar to a Rasberry PI. I have some issues with this setup and I'm looking to move up to an Intel Based low power computer. The system must be able to work nicely with Linux, specifically CentOS. I've heard that graphics drivers lately are a big issue.
Ideally, I'm looking for a very tiny, fanless system that I can put away in a cabinet somewhere in my office and have it run our phone systems.
I've been looking at different systems out there and I'm not sure whether building a system or buying a tiny barebones system would be the way to go. So far, the Gigabyte Brix system seems interesting. If you have any other recommendations or suggestions, please let me know.
-
- Posts: 5275
- Joined: Wed Jun 13, 2007 10:12 am
- Location: ITALY
Re: Recommendation for a small Linux Asterisk Computer
habusho wrote:If you have any other recommendations or suggestions, please let me know.
Set aside any NUC kit (as definitely a Brix is), you might give a look to those two barebones:
Shuttle XS35V4
Shuttle DS437T
Re: Recommendation for a small Linux Asterisk Computer
Thx for the tips. I had taken a look at the Shuttles before but they had trouble playing nice with Linux because of the type of integrated graphics they had.quest_for_silence wrote:habusho wrote:If you have any other recommendations or suggestions, please let me know.
Set aside any NUC kit (as definitely a Brix is), you might give a look to those two barebones:
Shuttle XS35V4
Shuttle DS437T
The XS35V4 has "Intel's 7th Generation Graphics Engine". I'm not sure which that one is.
I took a look at the XS35V4 model's page and it doesn't really say that it would be compatible with Linux. It does say this though:
Due to the Intel chipset spec reason, the XS35V4/XS36V4 only supports Windows 8/8.1 64bit operating system.
-
- Posts: 5275
- Joined: Wed Jun 13, 2007 10:12 am
- Location: ITALY
Re: Recommendation for a small Linux Asterisk Computer
habusho wrote:The XS35V4 has "Intel's 7th Generation Graphics Engine". I'm not sure which that one is.
It's an Intel Bay Trail (J1900), so you may look for the specific Intel HD engine on Intel website (whether Asterisk requires X).
habusho wrote:I took a look at the XS35V4 model's page and it doesn't really say that it would be compatible with Linux. It does say this though:
Due to the Intel chipset spec reason, the XS35V4/XS36V4 only supports Windows 8/8.1 64bit operating system.
The DS437T on the other hand is a regular mobile Ivy Bridge, so it should play safe with Linux.
Re: Recommendation for a small Linux Asterisk Computer
Ok, understood.
So far this shuttle XS35V4 seems like an extremely good option.
Any other machines I should consider?
So far this shuttle XS35V4 seems like an extremely good option.
Any other machines I should consider?
-
- Posts: 5275
- Joined: Wed Jun 13, 2007 10:12 am
- Location: ITALY
Re: Recommendation for a small Linux Asterisk Computer
Zotac Zbox CI320 nanohabusho wrote:Any other machines I should consider?
-
- Posts: 5275
- Joined: Wed Jun 13, 2007 10:12 am
- Location: ITALY
Re: Recommendation for a small Linux Asterisk Computer
Likely it shouldn't be able to run Linux effortless (it's meant for Win 8, isn't it?).CA_Steve wrote:Zotac P1320 Pico looks interesting.
Re: Recommendation for a small Linux Asterisk Computer
I wouldn't rule out the compatibility. The CPU seems to be a Bay Trail with a regular Intel GPU.
If you want to buy a Bay Trail, be aware that there are faster boards available now (packing the J2900 CPU). If something like the ISK110 is small enough for you, building you own barebone with one of these boards is very easy: put together the board and the ISK110 (or equivalent product) and you're done. No other parts are needed other than the RAM and storage (as you would need with other barebones).
There are also other Bay Trail fanless barebones. Use a search engine or fanlesstech.com.
The other Shuttle has a mainstream Intel CPU that's probably marginally better for your usage and which may have better compatibility. Power consumption ought to be a bit higher though.habusho wrote:So far this shuttle XS35V4 seems like an extremely good option.
Any other machines I should consider?
If you want to buy a Bay Trail, be aware that there are faster boards available now (packing the J2900 CPU). If something like the ISK110 is small enough for you, building you own barebone with one of these boards is very easy: put together the board and the ISK110 (or equivalent product) and you're done. No other parts are needed other than the RAM and storage (as you would need with other barebones).
There are also other Bay Trail fanless barebones. Use a search engine or fanlesstech.com.
Re: Recommendation for a small Linux Asterisk Computer
Thanks for the suggestions guys. The power fanatic in me wouldn't let me pull the trigger on a J1900 celeron.
I've gone ahead and ordered an Intel D54250WYK - an Intel Haswell Core i5 Nuc.
I'm going to be putting the motherboard inside of this case: http://www.tranquilpcshop.co.uk/nuc-chassis/ which is a passive aluminum case.
I've gone ahead and ordered an Intel D54250WYK - an Intel Haswell Core i5 Nuc.
I'm going to be putting the motherboard inside of this case: http://www.tranquilpcshop.co.uk/nuc-chassis/ which is a passive aluminum case.