Zalman ZM-GWB1 for nvidia 6800?

Irdawood · Post by **Irdawood** » Wed Jun 08, 2005 1:05 am

heya guys im thinking of buying an nvidia6800 ultra i was wondering if the zalman ZM-GWB1 could handle it?

or more to the point if it will fit? as i heard of a rumour it wouldnt

cheers

hazindu · Post by **hazindu** » Tue Jun 14, 2005 9:23 am

I've never messed with one myself, but most of the reviews I've seen were pretty dissapointed with the zalman block. in other words, you can do better.

Happy Hopping · Post by **Happy Hopping** » Tue Jun 14, 2005 10:03 pm

Go w/ Aqua Computer 6800 block, it is brilliant and made in Germany.

Irdawood · Post by **Irdawood** » Wed Jun 15, 2005 7:28 am

tag late for that really i already had bought the block, was just wondering if it fit on the 6800 cards?

Slaugh · Post by **Slaugh** » Sat Jun 18, 2005 9:57 am

Check this link. It might be helpful:

How I fitted the Zalman Reserator VGA water block (ZM-GWB1) to a Gainward nvidia 6800GT GS

juansolo · Post by **juansolo** » Wed Jun 22, 2005 12:50 am

I've got a Danger Den NV-68 on my Gainward 6800GT GS, no issues at all with it. Drops the temps by 10 degrees over the standard, very noisy, air cooler it comes fitted with. Also cools the ram.

Not exactly cheap mind you...

Happy Hopping · Post by **Happy Hopping** » Wed Jun 22, 2005 10:56 am

http://www.aqua-computer.de/e_index.htm

w/ water cooling GPU, I thought the bigger is better, so have a look at the above link.

I just can't see how can that little vga water block can do the job compares to the above

scroll down a bit and you can see the aqua 6800 water block