mATX G33/P35 with onboard DVI?

Got a shopping cart of parts that you want opinions on? Get advice from members on your planned or existing system (or upgrade).

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
zoob
*Lifetime Patron*
Posts: 380
Joined: Tue Apr 13, 2004 7:12 pm
Location: Toronto, ON
Contact:
Contact zoob

mATX G33/P35 with onboard DVI?

Post by zoob » Tue Jul 31, 2007 1:05 pm

Are there any G33 based boards with onboard DVI?

The boards I've been able to find have onboard VGA:

Asus P5K-VM
Gigabyte GA-G33M-DS2R


I'm looking for one that supports:
Onboard DVI
Mild overclocking
Analog Devices onboard audio
Top
pipperoni
Posts: 218
Joined: Sun Oct 24, 2004 9:10 pm
Location: Toronto
Contact:
Contact pipperoni

Post by pipperoni » Tue Jul 31, 2007 1:32 pm

Short answer seems to be no.

The only mATX board I've seen with DVI and G33 is the Intel board.
Akiba spotting

Otherwise there is the G33 Shuttle which has HDMI.
Top
mr_plow_king
Posts: 215
Joined: Sun Jun 05, 2005 6:21 pm
Location: St-Hubert, Qc

Post by mr_plow_king » Tue Jul 31, 2007 2:57 pm

Gigabyte GA-G33M-S2H
http://www.tomshardware.com/2007/07/31/ ... page6.html

However I can't find it on the Gigabyte webpage. Maybe it's not available yet
Top
christopher3393
Posts: 289
Joined: Fri Sep 23, 2005 9:46 pm
Location: Bloomington, MN

Post by christopher3393 » Tue Jul 31, 2007 4:10 pm

Here's the GigaByte link: http://www.gigabyte.com.tw/Products/Mot ... -G33M-DS2R

Here's Newegg: http://www.newegg.com/Product/Product.a ... 6813128053

Great board. Has HDMI.
Top
mr_plow_king
Posts: 215
Joined: Sun Jun 05, 2005 6:21 pm
Location: St-Hubert, Qc

Post by mr_plow_king » Tue Jul 31, 2007 4:27 pm

not the DS2R, there's no HDMI on the DS2R. The board I saw on Toms Hardware is the S2H. it has a DVI and a HDMI
Top
christopher3393
Posts: 289
Joined: Fri Sep 23, 2005 9:46 pm
Location: Bloomington, MN

Post by christopher3393 » Tue Jul 31, 2007 4:40 pm

My mistake. Misread the specs. I don't think the S2H is available yet.
Top
Moogles
Posts: 315
Joined: Thu Mar 22, 2007 10:28 am

Post by Moogles » Tue Jul 31, 2007 6:36 pm

Does this chipset support dual-link DVI, does anyone know? I'd like to know if it's capable of powering a 2560*1600 resolution. So far the only motherboard I know of that does this is Asus' M2A-VM...
Top
jackylman
Posts: 784
Joined: Sun May 22, 2005 8:13 am
Location: Pennsylvania, USA

Post by jackylman » Wed Aug 01, 2007 9:22 am

Moogles wrote:Does this chipset support dual-link DVI, does anyone know? I'd like to know if it's capable of powering a 2560*1600 resolution. So far the only motherboard I know of that does this is Asus' M2A-VM...
From the Intel datasheet (http://www.intel.com/design/chipsets/da ... 316966.htm):
Capabilities of the SDVO and Analog Display interfaces include:
• SDVO Support
⎯ SDVO ports in either single modes supported
⎯ 3x3 Built In full panel scalar
⎯ 180 degree Hardware screen rotation
⎯ Multiplexed Digital Display Channels (Supported with ADD2/MEC)
⎯ Two channels multiplexed with PCI Express* Graphics port
⎯ 225 MHz dot clock on each 12-bit interface
⎯ Supports flat panels up to 1920 x 1200 @ 60 Hz or digital CRT/HDTV at
1400 x1050 @ 85 Hz
⎯ Supports Hot-Plug and Display
⎯ Supports TMDS transmitters or TV-out encoders
⎯ ADD2/Media Expansion card utilizes PCI Express Graphics x16 connector
• Analog Display Support
⎯ 350 MHz Integrated 24-bit RAMDAC
⎯ Up to 2048x1536 @ 75 Hz refresh
⎯ Hardware Color Cursor Support
⎯ DDC2B Compliant Interface
• Dual Independent Display options with digital display
So it looks like single-link only. Sorry :?
Top
jeepescu
Posts: 45
Joined: Tue Aug 15, 2006 10:58 am
Location: montreal

Post by jeepescu » Mon Aug 06, 2007 4:37 pm

Asrock 4Core1333-FullHD
http://www.asrock.com/mb/overview.asp?M ... 333-FullHD

Yet, I was not able to find it on sale anywhere.
Maybe on it's way ?
Top
Post Reply

Return to “System Advice / Troubleshooting”