Detail data relevant to SPCR:
BIOS Voltage Controls are as such:
CPU Core: 1.40-1.75V (no underclocking for my Venice, 1.40 stock
)
DDR Slot: 2.50-3.55V
DDT VTT: 1.25-1.75V or DDR/2
nForce4: 1.50-1.80V
HyperTransport: 1.20-1.35V
DDR Memory Reference: -100 to +100, in 10s
CPU Memory Reference: -100 to +100, in 10s
I have no clue wtf the last two are for.
ABIT EQ Panel:
ABIT EQ Beep Control: Enabled or Disabled.
Temperature Monitoring ->
-Reading (Enable/Disable for CPU, Sys and PWM)
-Shutdown (Enable/Disable for CPU, Sys and PWM)
-Shutdown Temp. (80-95C for CPU
*, 66-80C for Sys and 81-110C for PWM)
-Warning Beep (Enable/Disable for CPU, Sys and PWM)
-Beep Temp. (65-79C for CPU, 50-65C for Sys and 70-80C for PWM)
* Curiously enough, if the Beep Temp for CPU is set for 75C, you can suddenly set the CPU Shutdown Temp as low as 76C
Fan Speed Monitoring ->
-Reading (Enable/Disable for CPU, NF4, SYS, OTES1, OTES2 and AUX)
-Shutdown (at 0rpm; Enable/Disable for CPU, NF4, SYS, OTES1, OTES2 and AUX)
-Warning Beep (Enable/Disable for CPU, NF4, SYS, OTES1, OTES2 and AUX)
-Beep Limit (600-3000rpm for CPU, NF4, SYS, OTES1, OTES2 and AUX)
Fan EQ1 ->
-CPU FanEQ (Enable/Disable)
--Ref (CPU is the only choice)
--High Temp (41-75C)
--Low Temp (25-64C)
--Fan High (8.5-12V)
--Fan Low (8.0-11.5V)
-NF4 FanEQ (Enable/Disable)
--Ref (CPU, SYS or PWM, your choice)
--High Temp (31-75C)
--Low Temp (25-39C)
--Fan High (8.5-12V)
--Fan Low (8.0-11.5V)
-SYS FanEQ (Enable/Disable)
--Ref (CPU, SYS or PWM, your choice)
--High Temp (31-75C)
--Low Temp (25-39C)
--Fan High (8.5-12V)
--Fan Low (8.0-11.5V)
Fan EQ2 ->
-OTES1 FanEQ (Enable/Disable)
--Ref (CPU is the only choice)
--High Temp (41-75C)
--Low Temp (25-49C)
--Fan High (6.5-12V)
--Fan Low (6.0-11.5V)
-OTES2 FanEQ (Enable/Disable)
--Ref (CPU is the only choice)
--High Temp (41-75C)
--Low Temp (25-49C)
--Fan High (6.5-12V)
--Fan Low (6.0-11.5V)
-AUX FanEQ (Enable/Disable)
--Ref (CPU, SYS or PWM, your choice)
--High Temp (31-75C)
--Low Temp (25-39C)
--Fan High (8.5-12V)
--Fan Low (8.0-11.5V)
I have not yet gotten to test to see if CrystalCPUID works on this board or not; I will report later on when I get a chance to try it out.
-Ed