2600+ palermo does not support cool n quiet

All about them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
kamosoft
Posts: 17
Joined: Sun Jun 15, 2003 1:07 am

2600+ palermo does not support cool n quiet

Post by kamosoft » Sun Apr 17, 2005 9:51 am

I bought one 2600+ 0.09 :cry:
Is there a way to enable cool 'n quiet, like there was a way to make a mobile XP from destop?
Last edited by kamosoft on Mon Apr 18, 2005 4:52 am, edited 1 time in total.

frostedflakes
Posts: 1608
Joined: Tue Jan 04, 2005 4:02 pm
Location: United States

Post by frostedflakes » Sun Apr 17, 2005 10:10 am

If your motherboard supports CnQ, you should be able to enable or disable it in the BIOS.
Corsair Obsidian 650D | Seasonic X-650 | Gigabyte GA-990FXA-UD5 | Phenom II X4 955 | Noctua NH-D14 | 2x4GB Corsair DDR3-1600 | ASUS HD6950 DirectCU II 2GB | OCZ Vertex 2 120GB | 2x WD Green 1TB

kamosoft
Posts: 17
Joined: Sun Jun 15, 2003 1:07 am

Post by kamosoft » Sun Apr 17, 2005 11:28 am

The m/b has this option in bios (asrock sis760GX). The problem is that the new semprons just don't have cool 'n' quiet. There is an article about 2600+ on xbitlabs.com .... plus a post on amd.com forum...
I'm so upset ...

StarfishChris
Posts: 968
Joined: Fri Jan 07, 2005 7:13 pm
Location: Bristol, UK
Contact:

Post by StarfishChris » Sun Apr 17, 2005 12:18 pm

IIRC only the 3000+ Semprons have this. I don't know if there are any bridges you can connect to enable it...

...although you could make up for not having a low idle power draw by being at full load all the time. (sorry :roll:)
It's coming back

sneaker
Posts: 131
Joined: Tue Dec 24, 2002 8:37 pm
Location: Australia

Post by sneaker » Sun Apr 17, 2005 12:22 pm

It's been discussed here as well, and the subject of your post is incorrect. The 2600+ and 2800+ are confirmed as not support CnQ, but this does not necessarily apply to the 3000+ and higher 90nm models.

kamosoft
Posts: 17
Joined: Sun Jun 15, 2003 1:07 am

Post by kamosoft » Mon Apr 18, 2005 4:57 am

I can't find where you have discussed it, can you advice me what sempron to get to be sure that it is 0.09 and support C'n'C?

StarfishChris :), I have 5 years on ud agent already :P

Post Reply