Asus A8N32-SLI and Scythe NINJA. Is this posible?

All about them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Chaendler
Posts: 53
Joined: Tue Aug 16, 2005 5:58 am
Location: Spain

Asus A8N32-SLI and Scythe NINJA. Is this posible?

Post by Chaendler » Fri Nov 18, 2005 1:21 pm

I'm wondering if the Ninja can be used in this mobo (because of the passive northbridge heatsink).

I'm interested of knowing if it can be used in a DFI LanParty Ultra-D too.

Thank you very much.

Locklear
Posts: 166
Joined: Mon Jul 04, 2005 2:08 am
Location: Norway

Post by Locklear » Sat Nov 19, 2005 4:22 pm

i have both components sitting on my desk right now, and just placing the Ninja on top of the CPU bracket shows it to have plenty of clearance on all sides.

Tumlehund
Posts: 68
Joined: Wed Nov 16, 2005 8:24 am
Location: Copenhagen, Denmark

Post by Tumlehund » Sat Nov 19, 2005 4:50 pm

Locklear wrote:i have both components sitting on my desk right now, and just placing the Ninja on top of the CPU bracket shows it to have plenty of clearance on all sides.
What kind of memory modules do you use? And how much clearence is there between the Ninja and the RAM slot closest to the CPU socket?

I womder how clearence you have with The Cosair XMS 3500LLPRO modules:
http://www.corsairmemory.com/corsair/pr ... 0LLPRO.pdf

Chaendler
Posts: 53
Joined: Tue Aug 16, 2005 5:58 am
Location: Spain

Post by Chaendler » Sat Nov 19, 2005 8:19 pm

I'm planning of getting a Polar Freezer for the graphic card.
I hope it do not touch the ninja..

Locklear
Posts: 166
Joined: Mon Jul 04, 2005 2:08 am
Location: Norway

Post by Locklear » Sun Nov 20, 2005 11:46 am

Tumlehund wrote:What kind of memory modules do you use? And how much clearence is there between the Ninja and the RAM slot closest to the CPU socket?

I womder how clearence you have with The Cosair XMS 3500LLPRO modules:
http://www.corsairmemory.com/corsair/pr ... 0LLPRO.pdf
i'm using corsair memories (CMX512-3200C2). The clearance should be plenty. Atleast 1cm, BUT the fins on the ninja start fairly high on the HSF so both the chipset "refrigirator" and the memory modules won't even reach up to the lowest fin. I still haven't gotten my case so i haven't actually assembled it yet, but lets just say I ain't worried at all :D

Chaendler
Posts: 53
Joined: Tue Aug 16, 2005 5:58 am
Location: Spain

Post by Chaendler » Sun Nov 20, 2005 12:53 pm

I have very "hungs up" with my a8n-sli. I'm thinking about to buy an a8n32-sli.

Please, once mounted the system post here any stability issue

Post Reply