Topic says it all. I'm only interested in your vcore @ 9x333 if you own a g0 Q6600 and you minimized the vcore and if it's stable to 2x orthos or prime95 v25.3 for over say 4 hours. It would also be cool to see your VID as reported in coretemp. So I guess I'd like to see two things:
1) Your minimized vcore @ 9x333 (g0 q6600)
2) A screenshot of Coretemp under load to see your VID and temps
Thanks in advance!
q6600 g0 owners - what is your min. stable vcore @ 9x333?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- *Lifetime Patron*
- Posts: 1809
- Joined: Sat Apr 24, 2004 1:45 am
- Location: At Home
This thread will interest you with regard G0 and low voltage.
Last edited by smilingcrow on Thu Aug 16, 2007 1:29 pm, edited 1 time in total.
-
- *Lifetime Patron*
- Posts: 1809
- Joined: Sat Apr 24, 2004 1:45 am
- Location: At Home
Try this link for data on VID values for G0 and B3 steppings.
-
- *Lifetime Patron*
- Posts: 1809
- Joined: Sat Apr 24, 2004 1:45 am
- Location: At Home
I was very surprised how low people were able to run VCore at stock speed in the other thread I linked. It bodes well for the voltages at 3GHz.graysky wrote:Thanks dude, but that's the thread I started