How hot is too hot for the 760G Northbridge?

All about them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Brian
Posts: 177
Joined: Wed Jan 18, 2006 3:41 pm
Location: Buffalo, NY

How hot is too hot for the 760G Northbridge?

Post by Brian » Thu Jul 22, 2010 2:26 pm

My northbridge sees 81°C - 177°F during 3D rendering. Do I need to upgrade the heatsink or add a fan? :(

Southbridge is around 50°C.

I've got the motherboard mounted to the wall, with no case. The cables are hanging off the bottom of the mobo. Therefore, the heatsinks have the fins running left-right instead of up-down.

Thoughts?

frenchie
Friend of SPCR
Posts: 1346
Joined: Tue Jul 08, 2008 4:53 am
Location: CT

Post by frenchie » Thu Jul 22, 2010 3:51 pm

Hi,
Maybe the Thermalright HR-05 ? It's a champ in it's category.
Main/gamming : Antec Solo|X-650|Asus P5Q-E|Intel [email protected]|HR-01 Plus 120mm Nexus @6V|Corsair 2x2Go XMS2 DHX cas 4 @4-4-4-12|Exhaust Nexus 120mm @9V|Intel X25M G2 160Gb|Samsung 1TB in SQD|2xGigabyte GTS450 OC (@900/1900/3800)|GPU fan 120mm Nexus @6V
HTPC/folder/Storage : Silverstone|E5300 with Samurai-Z|2Go RAM|[email protected]|2x1To WD EARS|Intel X25M G2 80Go

Fold with SPCR

Brian
Posts: 177
Joined: Wed Jan 18, 2006 3:41 pm
Location: Buffalo, NY

Post by Brian » Fri Jul 23, 2010 10:07 am

I suppose since I don't have any expansion cards, I could rotate the motherboard so all the cables attach at the left side instead of the bottom.

I'm trying hard to avoid replacing the stock heatsink. Do I need to worry about temps like 81°C?

Vicotnik
*Lifetime Patron*
Posts: 1817
Joined: Thu Feb 13, 2003 6:53 am
Location: Sweden

Post by Vicotnik » Fri Jul 23, 2010 2:22 pm

It's a bit high, but not extremely high. I would do something about it if the system would be unstable for some reason, but otherwise leave it alone I think.
Of course if you could arrange so that the fins would run vertical that would be great but I wouldn't say it's critical.

I use a Thermalright HR-05 myself btw. It's a good cooler but the mounting system is not great. I got it "just to be sure" since I have very little airflow in my case and it's perhaps not worth the money. But it can probably be reused for motherboards in the future so in the end it could be money well spent.
Main: ASRock B85M-ITX | i3-4330 | 16GB DDR3 | Intel 730 240GB | HDPLEX H1-S | picoPSU | No moving parts | Idle 13.9W
HTPC: ASRock H81M-ITX | Pentium G3420 | 4GB DDR3 | Intel 535 120GB | HDPLEX H1-S | picoPSU | No moving parts | Idle 11.2W
Gaming: Intel DH77EB | i5-3570K | GTX 1060 6GB | 16GB DDR3 | TJ08-E | RM750X
Server: ASRock N3150-ITX | ~30TB | G-360 | Idle ~25W

Post Reply