255W power supply in the 80 Plus "Gold" category
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar
-
- Posts: 2198
- Joined: Thu Feb 10, 2005 11:20 am
- Location: TN, USA
Just for your information, quite a few ebay listings have appeared for the DELL RM112 which has a interesting efficiency curve.
I wonder if it is the same in real life.
I wonder if it is the same in real life.
Last edited by lobuni on Sat Jan 16, 2010 1:48 pm, edited 1 time in total.
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Interesting find. Did a search to find out what type of system/case this oddly shaped PSU fits. It seems to be for the smallest version of the OptiPlex 960. There's a 90% efficient PSU option. Cheap enough for someone to try out. Output cables look minimal -- may have to pull out a soldering iron to add more.lobuni wrote:Just for your information, quiet a few ebay listings have appeared for the DELL RM112 which has a interesting efficiency curve.
I wonder if it is the same in real life.
-
- Patron of SPCR
- Posts: 857
- Joined: Fri Dec 27, 2002 1:49 pm
- Location: Somerset, WI - USA
- Contact:
So has anyone actually successfully used any of these high efficiency low power supplies, or atleast been able to find a place to purchase them cheaply?
Too bad most of these power supplies have non-ATX mounting standards...Im curious to see pics of how people have been mounting their supplies. Also, one thing to keep in mind is that some of the older Dell supplies (Im not sure what year) apparently have the standard physical 24 pin ATX power connector, but the electrical pin-out is NOT ATX compliant...which may fry your board. I believe the newer Dell PSUs have gone back to having ATX compliant pin-outs.
Too bad most of these power supplies have non-ATX mounting standards...Im curious to see pics of how people have been mounting their supplies. Also, one thing to keep in mind is that some of the older Dell supplies (Im not sure what year) apparently have the standard physical 24 pin ATX power connector, but the electrical pin-out is NOT ATX compliant...which may fry your board. I believe the newer Dell PSUs have gone back to having ATX compliant pin-outs.
-
- Posts: 419
- Joined: Mon Aug 31, 2009 12:30 am
- Location: Italy
This finding just made me want one badlyBillyBuerger wrote:I just picked one of these up for fun. I was wondering what that small connector was. One of the pictures had a closeup that shows it is a mini-sata power connector. This should make a fun project.
Though I'll have a hard time trying to justify using this unit instead of my BeQuiet 300w TFX unit I just purchased...
edit: I just found a VERY cheap R224M unit, it looks like it has the same shape, only slightly longer than the one you mentioned, and has a very similar efficiency on 50%+ loads. Do not forget to leave us all the information you can get once you have it in your hand (size, fan, noise)!
-
- Patron of SPCR
- Posts: 857
- Joined: Fri Dec 27, 2002 1:49 pm
- Location: Somerset, WI - USA
- Contact:
Oh yeah, I'll definitely be back to post my results. I have a picoPSU 150 + 200W brick from a Shuttle SD11G5 and a seasonic SS-300SFD to compare it to. These two both seem to be pretty even on efficiency. I don't think the brick is as efficient as some others are, at least at lower loads. I'll be testing it on my old Pentium M MoDT system which I've recorded down to 21W AC with just a 2.5" drive plugged in.
If possible, I'd like to maybe use this in my main desktop with an AII 245 and HD4670. The biggest issue will be the number and length of the cables as this is in a mini-P180. I have plenty of extra cables from old PSUs I can splice in. And I might see if I can make it fit inside a more standard sized PSU case which I also have spares of. But I won't know until I get it and take a look. This is going to be a fun project I think.
If possible, I'd like to maybe use this in my main desktop with an AII 245 and HD4670. The biggest issue will be the number and length of the cables as this is in a mini-P180. I have plenty of extra cables from old PSUs I can splice in. And I might see if I can make it fit inside a more standard sized PSU case which I also have spares of. But I won't know until I get it and take a look. This is going to be a fun project I think.
-
- Patron of SPCR
- Posts: 857
- Joined: Fri Dec 27, 2002 1:49 pm
- Location: Somerset, WI - USA
- Contact:
Oh yeah. I posted my results in a separate thread here. I also picked up a Dell H255E and posted the results of that one here. I've sent the modified RM112 to Mike for review. Check out the Donate for Review page if you want to get this thing reviewed on the SPCR test bed.bluebear wrote:Any news BillyBuerger, would be very interesting to hear your 2 cents on these PSUs.
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact: