buying HDDs based on vibration levels, recommendation?

Silencing hard drives, optical drives and other storage devices

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
venzz
Posts: 1
Joined: Sun Mar 06, 2011 4:46 am

buying HDDs based on vibration levels, recommendation?

Post by venzz » Sun Mar 06, 2011 5:34 am

I have a CM cosmos 1000.
My fans and graphics card are barely audible, the only problem is a i got the dreaded hum from the HDD vibrations.
I m using SSDs for my main drive and I m looking to purchase 2 HDs for raid storage.

Due to the design of the CM cosmos HDD mounting slot, I will not be able to use a HDD dampener.
Therefore, I need to buy HDDs that have low vibration levels.
so far, I am considering WD Caviar green or hitachi laptop HDD

any input will be appreciated.

fumino
Posts: 298
Joined: Thu Aug 05, 2010 4:38 pm
Location: ontario

Re: buying HDDs based on vibration levels, recommendation?

Post by fumino » Wed Mar 16, 2011 8:04 pm

other than what you could gather from the recommended hard drives list; i would suggest suspension in the 5.25" bays. nothing beats it, and then you can select from a larger pool of drives.

laptop hdds should vibrate less, just as a rule... you'll probably be safe getting something lower than 7.2k rpm

that said... you could probably suspend a laptop drive in one of the cosmos' hdd caddies. that'd be taking it to the next level.
my foamed mini p180 | corsair cx-400 w/ fan swap | scythe mugen-2 | thermalright hr-05 | unlocked sempron 140 | asrock 880g | 8gb mushkin |vertex 30gb boot | 7TBs storage |

Post Reply