Hello:
I found this link in a thread at Ace's Hardware: it's essentially a way to solder the HS to the CPU:
http://www.theinquirer.net/?article=10678
Kewl!
New "thermal compound" w/ nearly 10X efficiency
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
I wonder where you're soldering.The smart lads at RNT have an interesting technology. They are working on a foil, composed of nano thin layers of aluminum and nickel, that when ignited, heats up to 1500° C in less than 10 milliseconds. Combine that with a bit of solder, and you can bond a heat spreader or heat sink directly to a chip without damaging the chip.
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
Intel's already been soldering the IHS itself onto their newer P4 dies for the past 6-9 months now. They replaced that cheap TIM that they used to use. How did people find this out? They ripped the die off the package when they tried to remove their IHS's.Jan Kivar wrote:$hit, I hope that Intel doesn't hear about this...
Jan
Aye, I know that. But I'm thinking that this thing is much better than the one they are using now, thus giving the option to make more powerful Prescotts. Which would then take valuable production lines from our Pentium Ms...Ralf Hutter wrote:Intel's already been soldering the IHS itself onto their newer P4 dies for the past 6-9 months now. They replaced that cheap TIM that they used to use. How did people find this out? They ripped the die off the package when they tried to remove their IHS's.
Cheers,
Jan