I've decided to buy an XP90 for my AM2 3800+ but I'm not quite sure which fan to use on it. It seems the heatsink can hold 120mm, 92mm and 80mm fans so I have a wide range to choose from.
I'm not overclocking and am looking for something quiet with decent enough temperatures, like my current temperatures using the AMD HSF: 41°C case and 43°C CPU. Currently, the biggest noise in my system is the AMD fan, other than that I have a Seasonic S12-430 and WD2500KS running, and will probably put in a 80mm case fan too. The WD will probably become the noisiest component and I might need to look for some sort of enclosure for it.
Any suggestions on a fan that might go well with the XP90?
Fan for XP90 - advice needed
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
On the xp90, you dcan't stuff a 120 into there, without significant mods.
Try one of those panaflo's, maybe a Nexus / yate loon, scythe, etc. Just avoid the antec tri-cool in 92mm which comes in clear. Ugh, worst fans I ever used. at 5v, it's got so much clicking, while at 12v, it's quite loud. 7v will be loud AND clicky at the same time.
Try one of those panaflo's, maybe a Nexus / yate loon, scythe, etc. Just avoid the antec tri-cool in 92mm which comes in clear. Ugh, worst fans I ever used. at 5v, it's got so much clicking, while at 12v, it's quite loud. 7v will be loud AND clicky at the same time.
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
Hello,
I would guess that fitting the Scythe 100mm fan would be possible, and it is (apparently) a very quiet fan. The medium speed is very quiet:
http://www.silentpcreview.com/article636-page3.html
...and here is the the low speed model for sale:
http://www.jab-tech.com/ScytheKAZE-JYU- ... -3480.html
I would guess that fitting the Scythe 100mm fan would be possible, and it is (apparently) a very quiet fan. The medium speed is very quiet:
http://www.silentpcreview.com/article636-page3.html
...and here is the the low speed model for sale:
http://www.jab-tech.com/ScytheKAZE-JYU- ... -3480.html
Thanks for the replies so far guys. I've been measuring and I think a 92mm fan is about the maximum I can use. Anything above that, and the heatsink of my passive GPU card would come in the way when I use the first PCI-e slot. I might change motherboards later on because this really annoys me (it's an MSI K9N SLI Platinum and I have my eyes set on a ASUS M2N-SLI Deluxe).
But for the time being, my guess is a 92mm will do the job fine. I'll take a look at those suggestions. More are still welcome!
But for the time being, my guess is a 92mm will do the job fine. I'll take a look at those suggestions. More are still welcome!