Antec launches new range of CPU coolers
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Antec launches new range of CPU coolers
There are three coolers in the range. They are the KÃœHLER Shelf http://www.antec.com/Believe_it/global/ ... d=NzA0MzEz, KÃœHLER Box http://www.antec.com/Believe_it/global/ ... d=NzA0MzE0 and KÃœHLER Flow http://www.antec.com/Believe_it/global/ ... d=NzA0MzE1.
All three feature a 120mm PWM fan, with a range of 700 to 2000 rpm.
Edit: The Box seems to be a variant of the Dynatron G950 Genius, and the Flow looks to be derived from the Dynatron Evo 11. There are some cosmetic differences, and the fan spec is not the same, so it looks to be a bit more than a simple rebrand.
NewEgg is listing all three models at the same price of $49.99 http://www.newegg.com/Product/ProductLi ... ion=kuhler.
All three feature a 120mm PWM fan, with a range of 700 to 2000 rpm.
Edit: The Box seems to be a variant of the Dynatron G950 Genius, and the Flow looks to be derived from the Dynatron Evo 11. There are some cosmetic differences, and the fan spec is not the same, so it looks to be a bit more than a simple rebrand.
NewEgg is listing all three models at the same price of $49.99 http://www.newegg.com/Product/ProductLi ... ion=kuhler.
Last edited by lodestar on Sat Aug 07, 2010 3:29 am, edited 4 times in total.
-
- Posts: 6
- Joined: Sun Aug 08, 2010 1:35 am
- Location: Rome -> Italy
Push pins will become brittle over time and break. They aren't suitable for repeated removal, they can't be adjusted and installation means pressing down hard on the motherboard.
No, I don't like them much.
In a dream world all CPU coolers would have the mounting system of the Prolima Megahalem. It doesn't get any better than that, I think.
No, I don't like them much.
In a dream world all CPU coolers would have the mounting system of the Prolima Megahalem. It doesn't get any better than that, I think.
looks like a bolt through installation to me, is everyone just assuming it uses push pins?
japanese review with some pics.
japanese review with some pics.
Dynatron Evo 11 has Intel push-pin fittings, one set for each of the three different sockets. So you would expect the Flow to be the same. But there is a graphic of an installed Flow on the Antec website, it is on an Intel motherboard, and it is bolt through. The Box is also bolt through, so it seems that Antec have adopted that as the mounting system for at least these two coolers, and probably for all three in the range.porkchop wrote:looks like a bolt through installation to me, is everyone just assuming it uses push pins?