The Zalman CNPS20LQ looks to be a perfect match for my FT02 case, with the radiator sitting in the top 120mm fan housing, and with all the positive pressure airflow from the 3 bottom case fans, even my existing Scythe Slipstream should be able to move enough it to cool it and stay quiet
And it's a sealed system that uses non conductive liquid gel stuff, so no maintenance issues, and more like a heatpipe system
The main thing is the pump audible?
So a Zalman fan mate or similar would be needed at the leastThe CNPS20LQ Liquid CPU cooler is fully assembled, factory filled and sealed, making it as easy to install as an air cooler and chassis fan. Factory sealing eliminates the extra user maintenance common with component-built liquid cooling systems. The pump is built into the CPU block and is powered by a 3-pin fan header. The radiator can accommodate two 120mm fans (one supplied) for ultimate performance.
Please note: When the CNPS20LQ pump is running at full voltage (12V) it can make a slight ticking noise. We have found that this can be alleviated by reducing its running voltage down to 7 or 5 volts by using an RC56 or RC100 in-line resistor cable, and cooling performance is not significantly affected. Please consider ordering either or both of these resistors along with the CNPS20LQ if PC running noise is a strong consideration.